AMO Sovereign WhiteStar System Owners and Operators Manual V4.0 Aug 2003

SOVEREIGN ® System OWNER’S AND OPERATOR’S MANUAL Manufactured for: Advanced Medical Optics, Inc. 1700 E. St. Andrew Place Santa Ana, CA 92705 U.S.A. www.amo-inc.com

For Order Placement of Surgical Products (IOLs and Phaco Supplies) Call 1-800-366-6554 For Phaco Returns or Technical Service Call 1-800-449-3060

0050 AMO Ireland Dublin 4 Ireland

All returns must be accompanied by a RGA# (Returned Goods Authorization) Manual Replacement Order #SOV680006

PHACOEMULSIFICATION SYSTEM WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL2601-1/CAN/CSA C22.2 NO. 601.1 50KK The AMO Logo, Advanced Medical Optics, and the WhiteStar Logo are trademarks of Advanced Medical Optics, Inc., SOVEREIGN is a registered trademark of Advanced Medical Optics, Inc.

©2002, 2003 AMO, Inc.

Rx Only - Z370051 Ver. 4.0 - 803

This manual is written to familiarize all surgical team members who will set-up and operate the SOVEREIGN® System with the components, set-up, operation and care of your system and its accessories. You should read and understand this manual completely before using the SOVEREIGN® System in surgery. U.S. pats:4,793,345; 4,983,901; 5,230,614; 5,268,624; 5,342,293;5,392,653; 5,470,312; 5,591,127; 5,700,240; 5,852,794;5,983,794; 6,059,765; and; D426,882 and corresponding foreign patents.

1

Table of Contents Section

Contents

Page

1

Introduction About Phacoemulsification Declaration of Conformity SOVEREIGN® System features

1-1 1-2 1-3 1-4

2

System Components Receipt and Inspection Instructions SOVEREIGN® System Components OPO50 Tubing Pack

2-1 2-2 2-3 2-4

3

System Setup Safety Precautions and Warnings Symbol Definitions Setup Sequence Printer/Paper Loading

3-1 3-2 3-4 3-6 3-16

4

Equipment Operation Foot Pedal Display Screen and Controls Selecting and Changing Mode and Parameters Remote Control Printer

4-1 4-2 4-4 4-7 4-9 4-10

5

Programs with WHITESTAR™ Technology Programs Attributes

5-1 5-5 5-10

5.1

Programs without WHITESTAR™ Technology Programs Attributes

5.1-1 5.1-5 5.1-10

6

Operating Modes with WHITESTAR™ Technology Setup Verify Irrigation/Aspiration Balance Diathermy Phacoemulsification Irrigation/Aspiration Vitrectomy End Case

6-1 6-2 6-5 6-6 6-8 6-12 6-14 6-16

6.1

Operating Modes without WHITESTAR™ Technology Setup Verify Irrigation/Aspiration Balance Diathermy Phacoemulsification Irrigation/Aspiration Vitrectomy End Case (Contents continued on page 3)

6.1-1 6.1-2 6.1-5 6.1-6 6.1-8 6.1-11 6.1-14 6.1-16

2

Table of Contents (cont.) Section

Contents

Page

7

Recommended Settings with WHITESTAR™ Technology Programmable Power Pole Heights Diathermy Phacoemulsification Irrigation/Aspiration Vitrectomy Attributes

7-1 7-2 7-2 7-2 7-3 7-4 7-5

7.1

Recommended Settings without WHITESTAR™ Technology Programmable Power Pole Heights Diathermy Phacoemulsification Irrigation/Aspiration Vitrectomy Attributes

7.1-1 7.1-2 7.1-2 7.1-2 7.1-3 7.1-4 7.1-4

8

Check-Out, Precautions and Warnings System Check-Out Safety Precautions and Warnings

8-1 8-2 8-4

9

Care and Cleaning Cleaning Procedures Sterilization Procedures System Cleaning and Care

9-1 9-2 9-4 9-6

10

Error Messages and Troubleshooting and Diagnostics Start Up and Self Test Error Messages System Operation Error Messages Troubleshooting Diagnostics Touch Strip Calibration Bezel Test Fuse Replacement Procedure

10-1 10-3 10-5 10-6 10-10 10-12 10-13 10-14

11

Warranty and Maintenance

11-1

12

Specifications

12-1

13

Accessories and Parts Reordering

13-1

14

Index

14-1

3

List of Illustrations Section

Figure

Description

Page

System Components 2.1 2.2

SOVEREIGN® System OPO50 Tubing Pack

2-3 2-4

System Setup

Foot Pedal Connections Assembling the Phaco Handpiece Handpiece Receptacles Assembling the I/A Handpiece OPO50 Tubing Pack Releasing the Manifold Latch and Opening the Pump Latch Pump Segment Installation (part 1) Pump Segment Installation (part 2) Prepared for Priming Attach Drain Bag Installation Troubleshooting Watchouts Attaching I/A Tubing to the Phacoemulsification Ultrasonic Handpiece Connecting the Diathermy Forceps Vitrectomy Handpieces Printer and Print Button Paper Loading Sequence Loading Ribbon Cassette

3-6 3-7 3-8 3-9 3-10 3-10 3-11 3-11 3-12 3-12 3-13 3-14 3-15 3-15 3-16 3-17 3-18

Equipment Operation 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

Foot Pedal - Full Foot Position Foot Pedal - Toe Activated Position Foot Pedal Positions Handpiece Functions in Foot Pedal Positions Foot Pedal Side Switches Display Screen and Controls Remote Control Keypad Sample Case Log Printout

4-2 4-2 4-2 4-3 4-3 4-4 4-9 4-10

Programs with WHITESTAR™ Technology

5.1

Default Setup

5-2•5-4

Programs without WHITESTAR™ Technology

5.1.1

Default Setup

5.1-2•5.1-4

Operating Modes 6.1 with WHITESTAR™ Technology

Prime Handpiece and Fill Test Chamber

6-3

Operating Modes without WHITESTAR™ Technology

Prime Handpiece and Fill Test Chamber

6.1-3

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

6.1.1

4

Section

Figure

Description

Page

Recommended Settings with WHITESTAR™ Technology

7.1 7.2 7.3 7.4 7.5

Diathermy Settings Phacoemulsification Settings Irrigation/Aspiration Settings Vitrectomy Settings Attributes

7-2 7-3 7-4 7-4 7-5

Recommended Settings without WHITESTAR™ Technology

7.1.1 7.1.2 7.1.3 7.1.4 7.1.5

Diathermy Settings Phacoemulsification Settings Irrigation/Aspiration Settings Vitrectomy Settings Attributes

7.1-2 7.1-3 7.1-4 7.1-4 7.1-5

Start Up and Self Test Error Messages System Operation Error Messages Troubleshooting Fuse Specifications Back Panel Fuse Holder

10-3•10-4 10-5•10-6 10-6•10-9 10-14 10-14

Error Messages and 10.1 Troubleshooting 10.2 10.3 10.4 10.5

5

1

INTRODUCTION

In this section you will find: • About Phacoemulsification • Declaration of Conformity • SOVEREIGN® System Features • SOVEREIGN® System Operating Modes

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-1

1•Introduction About Phacoemulsification

Over thirty years ago, Dr. Charles Kelman conceived and developed phacoemulsification, a method of cataract removal by ultrasonic fragmentation and aspiration of the cataractous lens through a small wound. Phacoemulsification is advantageous for both patient and surgeon: • greater intraoperative control. • the smaller wound requires fewer or no sutures, poses less risk of infection and induced astigmatism, and gives better long and short term predictability of vision. • patients are able to resume normal activity much sooner and with fewer restrictions than with traditional cataract extraction surgeries.

Advanced Medical Optics, Inc. (AMO) supports phacoemulsification with sophisticated instrumentation that optimizes the benefits of this surgical procedure.

About This Manual

SOVEREIGN® System

This manual includes information regarding optional advanced SOVEREIGN® System features. Users with Whitestar™ software should refer to Chapters 5, 6, and 7 for Programs, Operating Modes and Recommended Settings. Users without Whitestar™ software should refer to Chapters 5.1, 6.1, and 7.1. The availability of these features in your SOVEREIGN® System configuration may be confirmed by your AMO Representative.

Rx Only - Z370051 Ver. 4.0 - 803

1-2

1•Introduction

DECLARATION OF CONFORMITY Application of Council Directive...Medical Devices Directive 93/42/EEC Standards to which Conformity is Declared...IEC 601-1 EN 60601-2-2 EN 60601-1-2

Supplier...Advanced Medical Optics, Inc.

Address...Santa Ana, CA 92705 U.S.A. Product...SOVEREIGN® System

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive.

Place: Santa Ana, California

Signature:

Date:

Full Name: Rod Patterson Position: Manager, Surgical Quality Assurance Advanced Medical Optics, Inc.

0050

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-3

1•Introduction About the SOVEREIGN® System Features

The SOVEREIGN® System represents over 6 generations of AMO phacoemulsification technology. Safety, ease-of-use, reliability and flexibility to different surgeon’s techniques are designed and manufactured into every SOVEREIGN® System. The SOVEREIGN® System meets UL (Underwriter's Laboratory), I.E.C. (International Electrotechnical Commission) 601-1 and E.M.C. (Electromagnetic Compatibility) requirements for this type of device. The SOVEREIGN® System contains a number of features based on extensive research and clinical trials with highly-trained and noted ophthalmologists who are experienced phacoemulsification surgeons.

WHITESTAR™ Software Technology

WHITESTAR™ Software Technology, for the SOVEREIGN® System delivers finely modulated pulses of energy, interrupted by extremely brief cooling periods. This allows the SOVEREIGN® System to achieve full ultrasound cutting efficiency and excellent followability, while putting less energy into the eye.

Advanced Fluidics System and Programmable Operating Parameters

One of the most advanced features of the SOVEREIGN® System is its fluidics system, that allows for intraocular-intraoperative control. In conjunction with this fluidics system, the SOVEREIGN® System is fully programmable through the color screen displays and front panel pushbuttons. The surgeon may preselect his/her desired settings for each portion of the surgical procedure. Up to 29 different setups, or “surgeon names,” plus the default settings program may be stored in the instrument program memory. This allows different users to preset their preferences, or an individual user to preselect setups for different procedures.

Phacoemulsification Ultrasonic Handpiece

The Phacoemulsification Ultrasonic Handpiece has been designed with a straight-through aspiration channel for more efficient removal of nuclear fragments, to minimize clogging and to facilitate easy cleaning. The handpiece is lightweight, slim, and well-balanced, making it comfortable to use and easy to manipulate.

Foot Pedal

The operating modes (Diathermy, I/A, Phaco and Vitrectomy) are controlled by the foot pedal. This state-of-the-art foot pedal design offers two options for activation and gives greater control through increased linearity and uniform pressure throughout the foot pedal travel, virtually eliminating foot and leg fatigue. The degrees of travel for each foot pedal position may be selected and saved in memory for each surgeon/procedure. Reflux is activated by programmable switches, giving immediate response. The foot pedal pivoting action may also be programmed to change between MMP modes. The foot pedal housing is waterproof to comply with I.E.C. 601 requirements. An optional, upgraded foot pedal is available with enhanced feedback and additional programmable switches. Tactile, vibrational feeedback is user selectable in a variety of configurations. Two ribbon switches allow increased surgeon independent control.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-4

1•Introduction SOVEREIGN® System Panel

The SOVEREIGN® System screen display is easy to read and easy to operate. You will know at a glance the exact status of the machine. The LCD display tilts and rotates for optimum visibility and comfort, and gives you visual indication of modes, settings, and system status. Messages cue you through the procedure, and error messages indicate improper connections or selections. Most custom programming and mode selections are made from the same display screen, eliminating the need to scroll through multiple displays. All instrument connections are easily accessed from the front for easy setup and less obstruction of the front panel displays.

SOVEREIGN® System cart

Operating Room teams contributed significantly to the successful design of the SOVEREIGN® System Cart. Its solid wheel base and large diameter wheels make it stable and smooth rolling. An open front "hearth" storage area gives ample easy-to-access storage for the foot pedal while the lateral and vertical adjustments on the articulating arm allow you to adjust the configuration for different surgery settings.

Programmable Power Pole

The integral automated and programmable power pole allows adjustment of the bottle height through each procedural phase. Two adjustment keys on the front control panel or the remote control are used to accurately raise and lower the bottled saline solution, while maintaining the sterility of the operating field.

Remote Control

The SOVEREIGN® System can also be operated/controlled from the remote control keypad. All modes can be remotely accessed, and all parameters may be adjusted using the remote control, including full programming and prime capabilities.

Setup Mode

The system incorporates a variety of prime and tune options for various purposes. The comprehensive prime tune mode includes tubing purge and fill, phaco handpiece tune and vacuum check. Other choices are I/A prime only, tune only, and irrigation free flow. Irrigation free flow can be used to set-up the case without use of the footpedal. Collecting irrigation may occur prior to priming.

Printer

The SOVEREIGN® System printer gives you the ability to print the case log at the end of each case, summarizing use time and settings for each mode. Individual surgeon programs may also be printed.

Memory card

The SOVEREIGN® System software is located on a memory card, which simply plugs into the rear of the machine. This memory card may be replaced to facilitate software updates as directed by your AMO representative.

Description of SOVEREIGN® System Operating Modes

The SOVEREIGN® System has been designed to provide all the surgical capabilities desired by the anterior segment/cataract surgeon. These capabilities include:

Phacoemulsification (PHACO)

This mode is used to break up (emulsify) the nucleus of the cataractous lens, allowing it to be aspirated from the eye through a small incision. The continuous autotuning circuitry maximizes the emulsification efficiency for each lens density, even varying densities within the same lens. Phaco time is displayed in minutes, seconds and tenths of seconds. Convenient selection of linear or panel-preset phaco power, in a variety of power delivery options (pulsed, burst etc.), gives the surgeon increased precision and control.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-5

1•Introduction Anterior Vitrectomy (VIT)

This mode is used to remove vitreous from the anterior chamber of the eye during a secondary IOL (intraocular lens) implant procedure, or following vitreous loss associated with trauma, or vitreous loss during primary cataract surgery. If vitreous is lost during cataract surgery, the vitrectomy capability can be ready and available in seconds.

Bipolar Diathermy (DIA)

This mode is used by most surgeons to coagulate blood vessels during the procedure and by some surgeons to "coapt" the conjunctiva at the end of the procedure. An isolated output frequency allows non-contact tissue coagulation, eliminating adhesion and traction. Also, the depth of penetration of the energy field is less than that of higher frequency units, minimizing tissue shrinkage or charring. The gentleness of the diathermy mode allows the surgeon to stop "bleeders" within the incision with only minimal scleral shrinkage, and to stop a "bleeder" from a 10-0 suture tract without melting the suture.

Irrigation/Aspiration (I/A)

This mode allows for controlled aspiration of cortical material from the eye, while maintaining intraocular stability by replacing the aspirated material with irrigation solution. A peristaltic pump provides a predictable and stable aspiration rate. Complete control is achieved with footswitch-linear or non-linear aspiration and adjustable presets for "ASPIRATION RATE" and "VACUUM". Irrigation is gravity-fed and is regulated by adjusting the height of the irrigating solution bottle. This mode gives you flexible control of each case with independently adjustable vacuum level and flow rate settings. The adjustable volume tone gives indication of the vacuum level.

Customized Surgeon Program

This capability allows programming of the machine with 29 different sets of specific surgeon parameters and preferences. Simply select the appropriate surgeon program and the SOVEREIGN® System automatically adjusts to the selected surgeon's preferences. Preset parameters are easily adjusted during a case to meet varying requirements. This capability allows rapid intraoperative access to 4 different sets of phaco mode parameters within each of the 29 customized programs. Quick activation via the graphical user interface or foot pedal side switch will instantly change the settings for aspiration rate, vacuum level, vacuum rise time, power preset, linear/non-linear and pulse/burst/ continuous phaco. This increases efficiency when a surgeon uses different settings for different stages of phacoemulsification (sculpting, quadrant removal, epinuclear evacuation, etc.). Other Multiple Modulation Presets •Diathermy...2 Sets •I/A...3 Sets •Vitrectomy...2 Sets Surgeon's customize the number of modes available with the mode select feature.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-6

1•Introduction Programmable Power Pole Capability

The SOVEREIGN® System is equipped with a programmable power pole. If the programmable power pole capability is activated at the beginning of the customizing program sequence, programmable power pole height settings can be entered independently for each of the Phaco MMP modes plus settings for Diathermy, I/A and Vitrectomy. During surgery, the programmable power pole height will change to the preprogrammed height when switching modes.

Occlusion Mode™ Phaco

Occlusion Mode™ Phaco is used to regulate the vacuum rise time that is experienced following occlusion of the phaco tip, without limiting the choice of aspiration rate through an unoccluded needle. In order to independently control aspiration rate and vacuum rise time, it is possible to have a different aspiration rate when the needle is occluded than when the needle is not occluded. Occlusion Mode™ Phaco is also used to regulate ultrasound power modulation. The power modulation of the phaco handpiece (continuous, pulse, burst) can be programmed to automatically change when the phaco tip changes from an unoccluded condition to an occluded condition.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

1-7

2

SYSTEM COMPONENTS

In this section you will find: • Receipt and Inspection Instructions • SOVEREIGN® System Components • SOVEREIGN® System Pack

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

2-1

2•System Components Receipt and Inspection

When you receive your SOVEREIGN® System inspect the exterior packaging for any signs of damage that may have occurred during shipping and record this damage on the shipping documents. If there are any signs of damage, carefully unpack the SOVEREIGN® System and inspect it for damage. If any damage to the package contents has occurred, you must file a claim with the transporter. Transporters will accept claims only from the recipient (you), not the shipper AMO, so be sure to contact the shipper immediately.

Installation and In-Service

Your AMO Representative will have contacted you to schedule both Installation and In-Service Training upon receipt of your new SOVEREIGN® System. We suggest that you leave the SOVEREIGN® System in its original packaging and store it in a cool, dry environment until AMO installation personnel arrive to assemble, install and test your equipment. Extreme heat, cold or moisture can damage any electronic equipment.

Components

Your SOVEREIGN® System may consist of some or all of the following components: • SOVEREIGN® System Console • Cart with Mayo Stand, Articulating Arm and Programmable Power Pole • Instrument Sterilization Tray • Phacoemulsification Ultrasonic Handpiece • PHACOFIT® Multi-Tip Irrigation/Aspiration Handpiece Set: Handle Straight Tip for Silicone Sleeve 45˚ Tip for Silicone Sleeve 90˚ Tip for Metal Sleeve Straight Tip for Metal Sleeve Sterilization Tray O-Ring Replacement Kit • OPO50 Disposable Tubing Pack • Diathermy Cord with Bipolar Forceps • Electronic Oscillating Vitrectomy Handpiece • Guillotine Vitrectomy Handpiece (OPO39) • Foot Pedal with Cord • Optional, Upgraded Footpedal with Cord • Power Cord (detachable) • Remote Control Module with Cord • Spike Mat • Spare Fuses • SOVEREIGN® System Owner’s Manual SOVEREIGN® System Quick Reference Guide AMO Customer Service Rolodex® Card(s) • Video Overlay System The major system components are identified in Figure 2.1.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

2-2

2•System Components

Programmable Power Pole

Balanced Salt Solution

Progammable Power Pole Adjustment

Display Screen

Spike Mat

Figure 2.1 SOVEREIGN® System Enter

Controls

Handpiece Connections Remote Control

Cart

Foot Pedal Storage Area Mayo Stand with Articulating Arm

Footpedal Optional Upgraded Footpedal

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

2-3

2•System Components SOVEREIGN® System Pack

Each phacoemulsification procedure requires a disposable OPO50 Tubing Pack. The OPO50 Tubing Pack contains the following components, which are identified in Figure 2.2: • Tubing manifold with irrigation and aspiration tubing • Drain Bag - attached • Two Tip Cap Sleeves • Test Chamber - for testing and protecting Phaco Tips and I/A Handpiece Tips • Mayo Stand Drape - to cover the instrument tray and arm

Figure 2.2 OPO50 Tubing Pack

Aspirated Fluid to Drain Bag

I/A Tubing Manifold Drain Bag

Irrigation Bottle Spike

Drip Chamber

Aspiration from Handpiece Irrigation to Handpiece

Pre-Operative Sterilization

SOVEREIGN® System

The Instrument Sterilization Procedures in Section 9, identifies those SOVEREIGN® System instruments that must be sterilized prior to each surgical case. Recommended sterilization techniques, times and temperatures are given in the table. AMO recommends that you follow the sterilization guidelines to maximize the life of your SOVEREIGN® System instruments.

Rx Only - Z370051 Ver. 4.0 - 803

2-4

3

SYSTEM SETUP

In this section you will find: • Safety Precautions and Warnings • Symbol Definitions • Setup Sequence Power Connections Phaco Handpiece Irrigation/Aspiration Handpiece SOVEREIGN® System Pack Diathermy Vitrectomy • Printer / Paper Loading

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

3-1

3•System Setup Before proceeding with system setup, thoroughly read the following safety precautions and familiarize yourself with the symbols found on the back of the SOVEREIGN® System.

SAFETY PRECAUTIONS 1. The SOVEREIGN® System is equipped with 3-prong plugs which should be plugged into an outlet with a ground receptacle. If the plug does not fit the outlet, contact an electrician. DO NOT defeat or remove the ground pin. 2. Do not use extension cords with your machine. 3. Do not overload your AC electrical outlet. 4. If the cord or plug is damaged, do not continue using the instrument. Electric shock or fire hazard may result. Call AMO to order a new cord. 5. The instrument has ventilation openings to allow the release of heat generated during operation. If these openings are blocked, heat build-up can cause system failures which may result in a fire hazard. 6. Do not try to roll the SOVEREIGN® System cart on deep pile carpets or over objects on the floor such as cables and power cords. 7. Do not place the instrument on uneven or sloped surfaces. 8. Do not use disposables, accessories or other surgical instruments that are not designed for this system. Use only parts recommended by AMO to achieve optimum performance and safety. 9. Do not exceed maximum weight of 25 pounds (11.25 Kg) on the Programmable Power Pole bottle holder.

SOVEREIGN® System

Rx Only - Z370051 Ver. 4.0 - 803

3-2