Operating and Cleaning Instructions
2 Pages
Preview
Page 1
®
®
Ameda Elite and HygieniKit Operating & Cleaning Instructions ®
Assembling the Ameda HygieniKit To Single Pump
To Double Pump
®
Operating the Ameda Elite Electric Breast Pump 4. 5. 6.
Assemble the Ameda HygieniKit© Milk Collection system as per the instructions included with the product. Insert the tubing adaptor on the HygieniKit© Milk Collection System into the piston cylinder opening. Centre your nipple(s) into the breast flange(s) of the HygieniKit© Milk Collection System. ®
Starting the Ameda Elite Electric Breast Pump 3.
Slowly, turn the vacuum dial to the right to the highest position most comfortable for you. Note: High suction does not necessarily produce more milk.
Setting the Cycle Speed 1.
2.
Turn the cycle dial all the way to the right to help trigger the let – down reflex. Once your milk begins to flow, turn the dial back to the left. As your milk begins to slow down, repeat step 5 to trigger more let-downs. When finished pumping, turn the vacuum dial all the way to the left to turn pump off.
(Turn over for Cleaning Instructions)
Advantage Health Care Pty. Ltd • P.O. Box 600 • Mordialloc Victoria 3195 Freecall: 1800 227 464 • Telephone: (03) 9580 9288 • Facsimile: (03) 9587 5871 • A.B.N. 30 057 079 428 www.ameda.com.au
®
Cleaning the Ameda HygieniKit After use,
Wipe over the tubing adaptor, tubing and adaptor cap. Do not wash. Does not require cleaning as it does not come in contact with mothers’ milk. Wash gently : Silicone diaphragm, pump body, valve, bottle and reducing insert, in warm soapy water. Soak valve if required. Rinse gently. Do not use bottle brush. Place items for disinfection/sterilization according to hospital protocol. IMPORTANT : Sterilization instructions : Hospital For Eco HygieniKit (polypropylene) : 134 deg C for up to 5 mins For HygieniKits (polycarbonate) : 121 deg C for 15 mins Home Boil for 20 mins or wash in warm soapy water. Air dry before assembly.
Cleaning the Elite : Wipe Elite with hospital grade disinfectant with a damp cloth. Remove the cylinder by placing the index finger into the tube and by turning clockwise releasing it from the attachment. Do not use abrasives or solvents.
Reinstall the cylinder as shown in the picture, In attachment points and . Press and click in place.
(See over for Operating Instructions)