Operating and Maintenance Manual
2 Pages
![3. Connect the Flowmeter to the supply pressure and gas specified on the Flow Tube. ! WARNING: The accuracy may be affected if the temperature of the gas is different than 70º F (21º C) and the supply pressure is different than that indicated on the Flow Tube. NOTE: The accuracy of the flow will not be affected by the attachment of accessories, however, the indicated flow may change. OPERATING AND MAINTENANCE MANUAL ! WARNING: Connection to the gas source must be done by using only the appropriately indexed fitting. - Flowmeter - 4. Ensure that the Float Ball is at the very bottom of the Flow Tube when turned off. NOTE: If the Float Ball is not at the bottom of the Flow Tube, the Flowmeter could be leaking. Please contact your dealer or Amvex Corporation. 5. Adjusting the Flow: To DECREASE Flow: Turn the knob clockwise To INCREASE Flow: Turn the knob counter clockwise 6. To set the flow, align the center of the float ball to the indicator line on the Flow Tube. ! WARNING: To avoid injury ALWAYS confirm flow requirement for patient prior to dispensing. Check flow frequently while being administered to patient. 7. An undetermined flow will arise if flow is adjusted beyond the last calibrated indicator. 8. Turn knob completely counterclockwise to achieve maximum flood/ flush flow. NOTE: Any flow beyond the last calibrated line on the Flow Tube with unrestricted flow is Flood/Flush flow. Cleaning Instructions Use a clean damp cloth with a mild cleaning solution to wipe outside of product. Do NOT gas sterilize with ETO. DO NOT clean with pungent hydrocarbons. CAUTION: DO NOT submerge Flowmeter in any form of liquid. This will cause damage and void any warranty on the product. Troubleshooting Contact your dealer or the technical support department at Amvex Corporation for assistance if the Flowmeter does not function properly. Maintenance Prevention Inspect the product before and after use for any damage and ease of operation. ! WARNING: When changing connectors on the Flowmeter for service or replacement, never re-attach connectors of a different gas. Doing so may result in patient injury or damage to the equipment. CAUTION: Disconnect Flowmeter from gas supply BEFORE SERVICING. WARRANTY The Amvex Series Flowmeter here know as “Product” is sold by Amvex Corp., a Delaware corporation (the “Company”) under the express terms of the warranty set forth below. For a period of SIXTY (60) MONTHS [with the exception of the 0-200 CCM and 0-1 LPM and 70 LPM Flowmeter for TWELVE (12) MONTHS] from the date the Company ships, this Product is warranted to be free from functional defects in materials and workmanship and to conform in all material respects to the description for the Product contained in this operation manual, if this Product is properly operated under conditions of normal use, regular periodic maintenance and service is performed and repairs are made in accordance with this operation manual. The Company’s sole and exclusive obligation and customer’s sole and exclusive remedy under the above warranty is limited to repair or replacement, at the Company’s option, of the defective Product. The foregoing warranty shall not apply if the Product has been repaired or altered by anyone other than the Company or an authorized dealer; or if the Product has been subjected to abuse, misuse, negligence, or accident. The Company reserves the right to stop manufacturing any product or change materials, designs, or specifications without notice. This warranty is extended to only the initial customer with respect to the purchase of this Product directly from the Company or an authorized dealer as new merchandise. Dealers are not authorized to alter or amend the warranty of any Product described in this agreement. Any statements, whether written or oral, will not be honored or be made part of the agreement of sale. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, COLLATERAL, CONSEQUENTIAL, OR SPECIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, OR LOSS OF USE. THE COMPANY’S LIABILITY, IN THE AGGREGATE, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. In order to file a warranty claim, customer is required to return Product prepaid to the Company at 25B East Pearce Street, Richmond Hill Ontario, L4B2M9 Canada. As determined at the sole discretion of the Company, Products which qualify under the warranty will be repaired or replaced, at the Company’s option, and returned to customer via ground delivery at the Company’s expense. All claims for warranty must first be approved by Amvex Corporations Customer Service Department: (customerservice@amvex.com or 866-462-6839/905-764-7736). Upon approval the customer service department will issue a Return Goods Authorization (RGA) number. An RGA must be obtained prior to commencement of any warranty claim. Oxygen Care Ltd. 2 Holfeld Business Park Kilmacanogue Co Wicklow Ierland 4 FM-MANUAL 04/14 FM - SS(S) T U (-) VV (WW) - (X) Flowrate Color Code Inlet Connection Gas Basic matrix shown. Consult the Amvex Catalogue for full matrix or contact your Amvex representative. The product package label contains your product identifier and description. Rx ONLY © 2014 Ohio Medical Corporation. This document contains information that is proprietary and confidential to Ohio Medical Corporation. Use of this information is under license from Ohio Medical Corporation. Any use other than that authorized by Ohio Medical Corporation is prohibited. Ohio Medical Corporation, the Ohio Medical logo, Amvex and the Amvex logo are registered trademarks of Ohio Medical Corporation. 25B East Pearce St., Richmond Hill, ON L4B 2M9 Canada | Tel: 905.764.7736 | Fax: 905.764.7743 | www.amvex.com ® 1111 Lakeside Drive, Gurnee, IL 60031-4099 | Tel: 1.800.448.0770 | Fax: 847.855.6300 www.ohiomedical.com 1](https://images.bioclinicalservices.com.au/NJ8T9gctnKeCLsR4QeZ62EbM/320w/Amvex%20Corporation%20-%20Flowmeter%20Operating%20and%20Maintenance%20Manual%20April%202014%20-%202014-04.png)
Preview
Page 1
3. Connect the Flowmeter to the supply pressure and gas specified on the Flow Tube.
! WARNING: The accuracy may be affected if the temperature of the gas is different than 70º F (21º C) and the supply pressure is different than that indicated on the Flow Tube. NOTE:
The accuracy of the flow will not be affected by the attachment of accessories, however, the indicated flow may change.
OPERATING AND MAINTENANCE MANUAL
! WARNING: Connection to the gas source must be done by using only the appropriately indexed fitting.
- Flowmeter -
4. Ensure that the Float Ball is at the very bottom of the Flow Tube when turned off. NOTE:
If the Float Ball is not at the bottom of the Flow Tube, the Flowmeter could be leaking. Please contact your dealer or Amvex Corporation.
5. Adjusting the Flow: To DECREASE Flow: Turn the knob clockwise To INCREASE Flow: Turn the knob counter clockwise 6. To set the flow, align the center of the float ball to the indicator line on the Flow Tube. ! WARNING:
To avoid injury ALWAYS confirm flow requirement for patient prior to dispensing. Check flow frequently while being administered to patient.
7. An undetermined flow will arise if flow is adjusted beyond the last calibrated indicator. 8. Turn knob completely counterclockwise to achieve maximum flood/ flush flow. NOTE:
Any flow beyond the last calibrated line on the Flow Tube with unrestricted flow is Flood/Flush flow.
Cleaning Instructions Use a clean damp cloth with a mild cleaning solution to wipe outside of product. Do NOT gas sterilize with ETO. DO NOT clean with pungent hydrocarbons. CAUTION: DO NOT submerge Flowmeter in any form of liquid. This will cause damage and void any warranty on the product. Troubleshooting Contact your dealer or the technical support department at Amvex Corporation for assistance if the Flowmeter does not function properly. Maintenance Prevention Inspect the product before and after use for any damage and ease of operation.
! WARNING:
When changing connectors on the Flowmeter for service or replacement, never re-attach connectors of a different gas. Doing so may result in patient injury or damage to the equipment.
CAUTION:
Disconnect Flowmeter from gas supply BEFORE SERVICING.
WARRANTY The Amvex Series Flowmeter here know as “Product” is sold by Amvex Corp., a Delaware corporation (the “Company”) under the express terms of the warranty set forth below. For a period of SIXTY (60) MONTHS [with the exception of the 0-200 CCM and 0-1 LPM and 70 LPM Flowmeter for TWELVE (12) MONTHS] from the date the Company ships, this Product is warranted to be free from functional defects in materials and workmanship and to conform in all material respects to the description for the Product contained in this operation manual, if this Product is properly operated under conditions of normal use, regular periodic maintenance and service is performed and repairs are made in accordance with this operation manual. The Company’s sole and exclusive obligation and customer’s sole and exclusive remedy under the above warranty is limited to repair or replacement, at the Company’s option, of the defective Product. The foregoing warranty shall not apply if the Product has been repaired or altered by anyone other than the Company or an authorized dealer; or if the Product has been subjected to abuse, misuse, negligence, or accident. The Company reserves the right to stop manufacturing any product or change materials, designs, or specifications without notice. This warranty is extended to only the initial customer with respect to the purchase of this Product directly from the Company or an authorized dealer as new merchandise. Dealers are not authorized to alter or amend the warranty of any Product described in this agreement. Any statements, whether written or oral, will not be honored or be made part of the agreement of sale. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, COLLATERAL, CONSEQUENTIAL, OR SPECIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, OR LOSS OF USE. THE COMPANY’S LIABILITY, IN THE AGGREGATE, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. In order to file a warranty claim, customer is required to return Product prepaid to the Company at 25B East Pearce Street, Richmond Hill Ontario, L4B2M9 Canada. As determined at the sole discretion of the Company, Products which qualify under the warranty will be repaired or replaced, at the Company’s option, and returned to customer via ground delivery at the Company’s expense. All claims for warranty must first be approved by Amvex Corporations Customer Service Department: ([email protected] or 866-462-6839/905-764-7736). Upon approval the customer service department will issue a Return Goods Authorization (RGA) number. An RGA must be obtained prior to commencement of any warranty claim. Oxygen Care Ltd. 2 Holfeld Business Park Kilmacanogue Co Wicklow Ierland
4
FM-MANUAL 04/14
FM - SS(S) T U (-) VV (WW) - (X) Flowrate Color Code
Inlet Connection Gas
Basic matrix shown. Consult the Amvex Catalogue for full matrix or contact your Amvex representative. The product package label contains your product identifier and description.
Rx ONLY © 2014 Ohio Medical Corporation. This document contains information that is proprietary and confidential to Ohio Medical Corporation. Use of this information is under license from Ohio Medical Corporation. Any use other than that authorized by Ohio Medical Corporation is prohibited. Ohio Medical Corporation, the Ohio Medical logo, Amvex and the Amvex logo are registered trademarks of Ohio Medical Corporation.
25B East Pearce St., Richmond Hill, ON L4B 2M9 Canada | Tel: 905.764.7736 | Fax: 905.764.7743 | www.amvex.com
®
1111 Lakeside Drive, Gurnee, IL 60031-4099 | Tel: 1.800.448.0770 | Fax: 847.855.6300 www.ohiomedical.com 1
IMPORTANT: SAFETY INSTRUCTIONS
• ALWAYS follow CGA and ANSI standards for Flowmeters and Medical Gas Products (E-7) and Oxygen Handling (G-4).
This manual provides you with important information about the Flowmeter and should be read carefully to ensure the safe and proper use of this product.
ATTENTION:
Keep the Flowmeter in a clean area when not being used.
Read and understand all the safety and operating instructions contained in this booklet before using this product.
ATTENTION:
Ensure that all connections are tightened and free of leaks prior to use. Only use an oxygen-safe leak detector when testing for leaks.
If you do not understand these instructions, or have any questions, contact your supervisor, dealer or the manufacturer before attempting to use the apparatus.
WARNING: !
Each Flowmeter is for use with only one type of gas.
! WARNING: Indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury.
ATTENTION:
Indicates a potentially hazardous situation, which if not avoided, could result in minor or moderate injury.
CAUTION:
Indicates a potentially hazardous situation, which if not avoided, could result in property damage.
Caution, consult accompanying documents ! Symbol indicates the device complies with the requirements of Directive 93/42/ 0413 EEC concerning medical devices (on CE marked devices only)
Intended Use A compensated thorpe tube flowmeter is a device intended for medical purposes that is used to control and measure gas flow rate accurately. The device includes a vertically mounted tube, with the outlet of the flowmeter calibrated to a reference pressure. Specifications
Gas
Scale
Oxygen
0-8 LPM
0.5 LPM
Oxygen/Air
0-15 LPM
0.5 LPM
Use no oil
ATTENTION:
It is very important to allow product to remain in original packaging for 24 hours to acclimatize to room temperature before use.
ATTENTION:
Store the product in a sealed package to avoid environmental damage. The operating and storage temperature for the Flowmeter should reflect typical environmental conditions of a medical facility environment.
User Responsibility Service of this device should only be performed by properly trained individuals.
The Amvex Flowmeter is used to dispense an adjustable flow of gas accurately under the direction of a healthcare professional. This product performs as explained in this manual. This holds true as long as the assembly, use, repair and maintenance are properly followed according to our instructions. Periodic review of this device is recommended. If any damage or defects are present, the product should not be used. This includes parts that are worn or missing. If any of the above are noted, immediate repair/replacement is required. If this device is subject to improper maintenance, repair, use and / or abuse leading to malfunction of the device, replacement is the sole responsibility of the user. ! WARNING:
(starts at 0.5 LPM)
Accuracy
Min.Flood/ Flush
Transport/ Storage Requirements
+/- 0.5 LPM or +/- 10% of reading
50 LPM
-40ºF to 140ºF (-40ºC to 60ºC)
+/- 0.5 LPM or +/- 10% of reading
50 LPM
-40ºF to 140ºF (-40ºC to 60ºC)
+/- 0.5 LPM or +/- 10% of reading
50 LPM
-40ºF to 140ºF (-40ºC to 60ºC)
+/- 0.5 LPM or +/- 10% of reading
50 LPM
-40ºF to 140ºF (-40ºC to 60ºC)
+/- 3 LPM
75 LPM
-40ºF to 140ºF (-40ºC to 60ºC)
(whichever is greater)
from 1 to 5 LPM
1 LPM
(whichever is greater)
from 5 to 15 LPM
Receiving Inspection Remove product from package and inspect for damage. Verify that the model received is in working order. If product is damaged or incorrect, do not use. Contact your dealer, equipment provider or manufacturer.
WARNING: !
Increments
Operation of this device is not to be done if flammable anesthetics are present due to the possibility of explosion caused by static charge.
TO MINIMIZE THE RISK OF EXPLOSION OR FIRE: • NEVER attempt to attach a Flowmeter directly to a cylinder. • NEVER use grease, oil, organic lubricants or flammable materials on or near the Flowmeter. • NEVER smoke in an area where oxygen is being used. • NEVER use any type of flame or flammable or explosive material near the Flowmeter. 2
CO2 / N2O
0-12 LPM
0.5 LPM from 1 to 6 LPM
1 LPM
(whichever is greater)
from 6 to 12 LPM
Heliox He/O2 (21% O2)
0-16 LPM
Oxygen/Air
0-70 LPM
0.5 LPM from 1 to 6 LPM
1 LPM
(whichever is greater)
from 6 to 16 LPM
5 LPM
starts at 10 LPM
Flowmeters are calibrated at the pressure indicated on the Flow Tube, 70º F (21º C), at standard atmospheric pressure. Specifications are subject to change without prior notice.
! MRI WARNING: This product contains magnetic, ferrous material that may affect the result of an
MRI. MR Conditional options may be available, contact your Amvex Representative at 1-866-462-6839 (905-764-7736)
! WARNING:
Block flow splitters configured with Flowmeters require a supply line that can maintain prescribed pressure with flow capacity greater than the sum of the flood value of all Flowmeters (e.g. a block configuration with three 15LPM Flowmeters requires a supply of 150LPM minimum flow capacity which is maintained at 50 PSI). If power takeoffs are configured, ensure supply line can provide for load. The minimum required flow rate from the power takeoff is dependent on the equipment connected to the power takeoff.
Operating Instructions 1. Turn Flowmeter off by turning knob fully clockwise. 2. Inspect the Flowmeter for damage. If any is found, do not use the Flowmeter. CAUTION:
Over tightening the knob when turning the Flowmeter off will cause damage. The Flowmeter must be used with the Flow Tube in an upright position.
! WARNING:
The Flow Tube specifies the gas and pressure required. 3