Care and Maintenance Pictogram
1 Page
Preview
Page 1
Care and Maintenance Power Tools. Pictogram Key. Disassembling
Spray for maximum 1 second with Synthes Maintenance Spray. If possible choose the Maintenance Unit alternative for lubrication of Electric Pen Drive and Air Pen Drive
Spray with disinfectant and wipe off*
Immersion in disinfectant possible*
Lubricate the designated points. See product-specific “Instructions for Use” for more detailed information The number of drops is shown on the Care and Maintenance posters
Wipe off with an absorbent cloth soaked in disinfectant*
Manual cleaning**
Immerse in instrument milk (non-silicone based medical lubricant)
Immerse in cleaning solution
Steam sterilization** H2O
Automated cleaning with manual pre-cleaning** 036.000.057 DSEM/PWT/0115/0055 01/15
EO
Immersing not allowed
Immersing and automated cleaning not allowed
H2O
21 2 11 Recalibrate
9 10 1
Flush the inner lumen with a syringe
Do not sterilize!
Recalibrate once a year
3 4 5
6 7 8
© DePuy Synthes Power Tools, a division of Synthes GmbH. 2015. All rights reserved.
Steam sterilization only. Hot air, ethylene oxide, plasma and formaldehyde sterilization are not recommended
Check the function of parts marked in red
Do not bend a cable or hose
Lubricating with the Maintenance Unit should always be the first option of lubrication for Electric Pen Drive and Air Pen Drive
When a symbol is marked with a cross, the action is forbidden
Caution: Use the mentioned article for this step
article # * Follow disinfectant manufacturer’s instruction ** Detailed instructions for manual cleaning, automated cleaning and steam sterilization can be found in the product-specific “Instructions for Use”
Instruments and implants approved by the AO Foundation.