ARJO Huntleigh Healthcare
Enterprise 5000X Quick Reference Guide
Quick Reference Guide
3 Pages
Preview
Page 1
Enterprise 5000X
® Quick Reference Guide ENTERPRISE E5X RANGE
QUICK REFERENCE GUIDE IMPORTANT!
This Quick Reference Guide (QRG) is intended to assist the user in understanding the basic functions of this product. The QRG does not replace the safety warnings, cautions and other important information provided in the Instructions for Use (IFU) supplied with the equipment; copies of the IFU are available on request from ArjoHuntleigh. Some of the functions should only be used by clinically-qualified personnel. The carer should make sure they have read and understood the IFU before using this equipment. This product is intended for patients over 12 years of age. A clinically-qualified person should assess the age, height and medical condition of the patient to ensure they can use the product safely. Place the mattress platform in the low height position when the patient is unattended.
Head board Patient handset Side rail Attendant Control Panel Foot board Accessory socket
Lifting pole socket Drainage bag rail Side rail operating knob
Bedstripper/ linen shelf
CPR handle
Extension locking handle
Extension catch bar Roller buffer Castor
Technical data Safe working load (SWL)
250kg / 550 lbs.
Maximum patient weight
185kg / 407 lbs.
Recommended patient height
146 to 190cm
Product weight (without mattress)
144kg
Operating temperature
5°C to 40°C
Standard mattress size
202 x 88cm
Brake pedal
Patient handsets
Bio-Contour up
Bio-Contour down
Raises the backrest
Raises the thigh section
Lowers the backrest
Lowers the thigh section
L
Optional
Standard
Attendant Control Panel (ACP) Raises the mattress platform
Raises the thigh section
Raises the backrest
Power on indicator
Auto-Chair up
Battery status indicator Lowers the mattress platform
Auto-Chair down Lowers the backrest
Lowers the thigh section Head down tilt (Trendelenburg)
Auto CPR position
Foot down tilt (Reverse Trendelenburg)
Function lockout
Battery status indicator Battery fully charged Battery charging Battery discharged
A “beeping” sound indicates that the bed is operating on battery power. Connect the bed to the mains supply as soon as possible.
Function lockout
CPR release
To lock or unlock bed functions: press the Function Lock button, then press the Attendant Control Panel button(s) corresponding to the function(s) to be locked or unlocked.
Pull the red CPR lever to quickly lower the backrest.
The “lock” indicator above the function button will light when the function is locked and go out when it is unlocked.
Side rails Calf section adjustment Use the bed controls to raise the thigh section. Manually lift the calf section until it latches in the horizontal (vascular) position.
Make sure the side rail is securely locked when in the raised position Make sure the side rail is securely locked when in the raised position.
Mattress platform length adjustment Brakes and steering The brakes should be applied at all times when the bed is stationary. The pedals may be linked by a full width brake bar.
Pull the locking handle (A) and move the bed frame (B) to the required position. Adjust the mattress platform length to match the bed frame by lifting the catch bar (C) and moving it (D) to the required position.
B
D
D C
A BRAKE
FREE
STEER