ARJO Huntleigh Healthcare
Parker Quick Reference Guide - Cleaning and Disinfection
Quick Reference Guide
4 Pages
Preview
Page 1
QUICK REFERENCE GUIDE - CLEANING AND DISINFECTION
Parker Disinfect with integrated spray handle Remove visual residue 1
2
3
4
Put on protective gloves and eye wear.
The bathtub should be in upright position with all functions turned off.
Open the drain. Place all accessories at the bottom.
Shower with water to remove visible residue.
Determine the disinfectant mixing ratio 5
6
7
8
5 seconds 80 80
70
70 60
60
50 40
50
30 20
40 MIX
30 20
MIX
Lift out the disinfection spray handle.
Activate the disinfection button.
Mixing temperature 20°C (68°F).
Spray into the bathtub until the flow meter shows correct mixing value according to the Instructions for use. Adjust knob on the suction hose if needed.
Clean 10
9
Spray disinfectant in the drain. Scrub drain with a brush.
11
Close the drain.
12
Spray disinfectant on all internal surfaces and all sides of the accessories.
For Parker without Air spa go to step 24.
Scrub internal surfaces and accessories thoroughly.
Step 13–23 for Air spa only 13
14
Recline the bathtub.
Place the disinfection spray handle into the inlet. Turn left or right to secure tightly.
18
19
15
16
17 80 70 60 50 40 30 20
MIX
Press and hold the trigger. Disinfectant must flow from all nozzles for at least 30 seconds.
20
Release the trigger and remove the spray handle.
21
Put back the spray handle.
22
23
Remove the shower handle.
Raise the bathtub to upright position.
5 seconds
Deactivate the disinfection button.
Place the shower handle into the inlet. Turn left or right to secure tightly.
Activate the shower button.
Press and hold the trigger. Clean water must flow from all nozzles for at least 30 seconds.
Continue with the steps on the next page
08.AL.01_7EN • 03/2023 • Page 1/4
QUICK REFERENCE GUIDE - CLEANING AND DISINFECTION
Parker 24
25
Open the drain.
Water temperature 25°C (77°F).
26
Rinse internal surfaces and accessories with water.
Disinfect 30
29
27
28
Deactivate the shower button.
Soak a cloth in disinfectant. Wipe all external surfaces.
31
32
Spray disinfectant in the drain.
Close the drain.
5 seconds
Activate the disinfection button.
Remove all disinfectant with a new cloth and water.
Step 35-46 for Air spa only 33
34
Spray disinfectant on all internal surfaces and all sides of the accessories.
35
Allow an appropriate contact time of the disinfectant according to the disinfectant manufacturers IFU.
38
37
For Parker without Air spa go to step 47.
39
36 Place the disinfection spray handle into the inlet. Turn left or right to secure tightly.
Recline the bathtub.
41
40
5 seconds 80 70 60 50 40 30 20
MIX
Press and hold the trigger. Disinfectant must flow from all nozzles for at least 30 seconds.
Release the trigger and remove the spray handle.
Deactivate the disinfection button.
Put back the spray handle.
Allow an appropriate contact time of the disinfectant according to the disinfectant manufacturers IFU.
42
43
44
45
46
Place the shower handle into the inlet. Turn left or right to secure tightly.
Activate the shower button.
Press and hold the trigger. Clean water must flow from all nozzles for at least 30 seconds.
Remove the shower handle.
Raise the bathtub to upright position.
Continue with the steps on the next page
08.AL.01_7EN • 03/2023 • Page 2/4
QUICK REFERENCE GUIDE - CLEANING AND DISINFECTION
Parker 49
47
48
Open the drain.
Activate the shower button.
50
Rinse internal surfaces and accessories with water.
Wipe all external surfaces with disinfectant.
Step 53–54 for Air spa only 53
51
52
Allow an appropriate contact time of the disinfectant according to the disinfectant manufacturers IFU.
Remove all disinfectant with a new cloth and water.
55
Leave to air dry.
08.AL.01_7EN • 03/2023 • Page 3/4
Press Air spa button twice. Run at highest intensity for 30 seconds.
54
Press once to turn off.
QUICK REFERENCE GUIDE - CLEANING AND DISINFECTION
Parker Disinfect with spray bottle Remove visual residue 1
2
3
4
Put on protective gloves and eye wear.
The bathtub should be in upright position with all functions turned off.
Open the drain. Place all accessories at the bottom.
Shower with water to remove visible residue.
Clean
!5
6
7
8
9
Spray disinfectant in the drain. Scrub drain with a brush.
Close the drain.
Spray disinfectant on all internal surfaces and all sides of the accessories.
Scrub internal surfaces and accessories thoroughly.
Open the drain.
10
11
12
Rinse internal surfaces and accessories with water.
Wipe all external surfaces with disinfectant.
Remove all disinfectant with a new cloth and water.
Disinfect 13
14
Spray disinfectant in the drain.
17
16
15
Spray disinfectant on all internal surfaces and all sides of the accessories.
Close the drain.
18
Open the drain.
19
Wipe all external surfaces with disinfectant.
Rinse internal surfaces and accessories with water.
21
22
Remove all disinfectant with a new cloth and water.
Leave to air dry.
ArjoHuntleigh AB Hans Michelsensgatan 10 211 20 Malmö, Sweden www.arjo.com
08.AL.01_7EN • 03/2023 • Page 4/4
Allow an appropriate contact time of the disinfectant according to the disinfectant manufacturers IFU.
20
Allow an appropriate contact time of the disinfectant according to the disinfectant manufacturers IFU.