Flowtron ACS900 Quick Reference Guide Jan 2020

QUICK REFERENCE GUIDE

Flowtron ACS900 Reading the patient run timer - hours and minutes 1

Hours are displayed by default whenever the pump is powered on. The “h” shows the value in hours (e.g., 12 h).

2

Press the right button for 1 second to display the minutes.

Minutes are displayed for 5 seconds when the button is pressed. The minutes value is preceded by a hyphen (e.g., - 14 = 14 minutes).

1s

3

5s Hours resume being displayed automatically. Compression time = 12 hours, 14 minutes.

Resetting the patient run timer - hours and minutes 1

2

3

2s Place the pump into pause. Press and hold the right button for 2 seconds until the hours value flashes.

ArjoHuntleigh AB Hans Michelsensgatan 10 211 20 Malmö, Sweden www.arjo.com

3s Press and hold the center button for 3 seconds to reset to zero.

08.FL.00EN_01 • 01/2020

Press the right button to confirm the reset.