Infusomat Space Loading and Unloading Procedure Instructions For Use June 2019

Infusomat® Space

Loading and Unloading Procedure Loading Procedure

1 2

Turn the pump on by pressing Press

and

to open the pump door.

Always start at the right hand side. Insert the two holed clip.

3

Insert the second white clip. Ensure that the silicone tubing is not twisted.

4

Ensure the green opening lever is pressed down and the yellow hazard light is flashing.

5 6





Unloading Procedure

1 2

Press

to stop the infusion. The green LED goes out.

Close the roller clamp. Press

. Confirm the prompt with

.

3

Pull firmly down on the door to open and engage the anti-freeflow.

4

Press down the green opening lever completely until it locks in place.

Insert the green clamp into the anti free-flow slot. When correctly inserted the yellow hazard light will stop flashing.

Push and hold the door firmly for a few seconds to close. Confirm giving set with .

SCAN THIS QR CODE TO WATCH A VIDEO ON THE CORRECT LOADING PROCEDURE

5

Remove the line and close the pump door.

SCAN THIS QR CODE TO WATCH A VIDEO ON THE CORRECT UNLOADING PROCEDURE

This poster is provided for reference only. Prior to operating this equipment all users should consult the full Instructions For Use. B. Braun Medical Ltd | Hospital Care | Thorncliffe Park | Sheffield | S35 2PW Tel 0114 225 9000 | Fax 0114 225 9111 | www.bbraun.co.uk XX-ISLUP-06-19