NESS L300 User Reference Card Rev B

User’s Reference Card Putting On the L300 Functional Stimulation (FS) Cuff While seated, slightly extend your lower leg.

22.

Tilt the top of the L300 FS Cuff toward you, and then slide it up your leg until the locator rests below the kneecap. Lower the bottom of the L300 FS Cuff onto your leg.

33.

Hold the L300 FS Cuff in place with your thumb or other hand on the RF Stim Unit cradle. Pull the strap handle around the cradle.

44.

Figure 4 shows the L300 FS Cuff correctly placed on the right leg. (Regular L300 FS Cuff shown.)

2

3

On/Off Button

Plus/Minus Intensity Adjustment Buttons

4

Volume Adjustment Buttons

R EF ER

Mode Button

EN

Operating the NESS L300 System

C

1

E

O

N

LY

1

RF Stim Unit Intelli-Sense Indicator Gait Sensor™ Indicator

Control Unit Indicator

Digital Display

Press the

on/off button to turn on the Control Unit.

2

Select either gait or training mode: • To select gait mode, press the mode button briefly. • To select training mode, press and hold the mode button until appears in the digital display.

FO

R

1

3

If necessary, adjust the stimulation intensity level by pressing the button.

Worldwide Corporate Office Bioness Inc 25103 Rye Canyon Loop Valencia, CA 91355 Telephone: 800-211-9136 Email: [email protected] Website: www.bioness.com

Manufactured by: Bioness Neuromodulation Ltd. A Bioness Inc Company 19 Ha’Haroshet Street PO Box 2500 Industrial Zone Ra’Anana 43654, Israel

(“t” for training) plus or

European Authorized Representative Ness Europe B.V. Stationsweg 41 3331 LR Zwijndrecht, The Netherlands Telephone: +31.78.625.6088 Email: [email protected] Website: www.bioness.com

NESS®, NESS L300®, Intelli-Gait®, Intelli-Sense Gait Sensor™, Bioness, the Bioness Logo® and LiveOn® are trademarks of Bioness Inc. | www.bioness.com 612-00096-001 Rev. B

minus