BRAINLAB
ZEISS VARIO Assembly Guide Rev 1.0
Assembly Guide
2 Pages
Preview
Page 1
QRG VarioGuide.fm Page 1 Thursday, May 31, 2007 3:36 PM
VARIOGUIDE ASSEMBLY STEP 1 • Place the disc joint onto the ring of the VarioGuide arm • Make sure to match the six teeth on the ring to the indentations on the disc joint
NOTE: Only one orientation is possible.
STEP 2 • Rotate the disc joint 180° to the position shown • Insert the Joint 1 lock and position the lock so that it fits against the ring of the VarioGuide arm • Secure Joint 1 by turning the nut clockwise
STEP 3 • Insert the reference array holder into the disc joint until it comes into contact with the stop screw • Screw the reference array holder in until you can slide it freely in the disc joint
STEP 4 • Slide the reference array holder in the disc joint until the lines on both components are aligned • Turn the nut as shown in order to secure the reference array holder to the disc joint
Note: The Quick Reference Guides do not replace reading the user manuals
QRG VarioGuide.fm Page 2 Thursday, May 31, 2007 3:36 PM
STEP 5 • Place the VarioGuide array onto the reference array holder • Make sure to match the six teeth on the ring of the reference array holder to the indentations on the array
STEP 6 • Turn the VarioGuide array 90° as shown until the lines on both components are aligned • Insert the Joint 3 lock and position the lock so that it fits against the ring of the reference array holder • Secure Joint 3 by turning the nut clockwise
STEP 7 • Place the inner disc onto the VarioGuide array, aligning the required diameter on the inner disc to the arrow on the array • Press the inner disc until it clicks into position • Assemble the lock ring to the outer disc • Attach the assembled lock ring and outer disc to the inner disc. Align the lines (in yellow) on the inner and outer discs. • Screw the lock ring into place
STEP 8 The assembled VarioGuide is now in the initial position and can be connected to the V-connector
MANUFACTURER INFORMATION:
COPYRIGHT:
LIABILITY:
BrainLAB AG Kapellenstr. 12, 85622 Feldkirchen, Germany
This guide contains proprietary information protected by copyright. No part of this guide may be reproduced or translated without the express written permission of BrainLAB.
This guide is subject to change without notice and does not represent a commitment on the part of BrainLAB. For further information, please refer to the “Limitations of Liability” section in the BrainLAB Standard Terms and Conditions of Sale.
Europe, Latin America: +49 89 99 15 68 44 USA & Canada: +1 800 597 5911 Japan: +3 5733 6275 E-mail: [email protected]
Document Revision: 1.0 Article Number: 60903-49EN