Emergency Set-Up Card
6 Pages
Preview
Page 1
LTV 1200 ventilator emergency set-up card ®
For 24-hour assistance, call 800.754.1914
For 24-hour assistance, call 800.754.1914 Step 1: Choose a power source.
AC adapter
SprintPack Lithium-Ion
(Use AC power when available).
Power System
Step 2: Connect the LTV® 1200 ventilator to the power source.
Step 3: Choose a circuit.
22 mm patient circuit, adult >20 kg >44 lb
Sense lines/To ventilator
22 mm adapter To ventilator
• Open bag. • Remove patient circuit and 22 mm adapter from bag.
15 mm patient circuit, infant/pediatric 5 kg to ≤ 20 kg 11 lb ≤ 44 lb
Humidifier circuit (optional)
To patient
Sense lines/To ventilator
22 mm adapter To ventilator To patient
For 24-hour assistance, call 800.754.1914 Step 4: Connect the circuit to the LTV 1200 ventilator. Filter optional
Attach 22 mm adapter (found in circuit bag).
Connect circuit to 22 mm adapter.
Step 5: Connect the sense lines to the LTV 1200 ventilator.
Turn clockwise.
Step 6: Turn on the LTV 1200 ventilator.
On/Standby
For 24-hour assistance, call 800.754.1914 Step 7: Patient setting displays.
Once the power is on, see Same Patient display.
Step 8: Change display to the New Patient setting. Select
Rotate Set Value knob
Press Select when New Patient
clockwise until New
is displayed.
Patient is displayed.
Step 9: Set patient size. Select
Rotate Set Value
Press Select when proper patient
knob to correct
size is displayed.
patient size (infant, pediatric or adult).
Note: If you make a mistake, turn the LTV 1200 ventilator off by holding the On/Standby button for three seconds. Then return to Step 6.
For 24-hour assistance, call 800.754.1914 Step 10: Connect circuit to ET tube or mask.
ET tube
Mask
Silence/ Reset
ALARM notice: The LTV 1200 ventilator will alarm until it is connected to the patient. To turn it off, you may press the Silence/Reset button.
Step 11: Optional: Use a mask.
Adult
Pediatric
Choose a mask (pediatric or adult).
Connect elbow to mask.
Connect to patient.
Step 12: Optional: Use an HME and/or flextube as shown for patient comfort.
Flextube This emergency set-up card is intended to provide emergency HME
instructions for initial LTV 1200 ventilator set-up. The initial settings may need to be adjusted based on the patient’s clinical condition. For complete information regarding set-up and operation, refer to the LTV 1200 ventilator operator’s manual.
CareFusion 22745 Savi Ranch Parkway Yorba Linda, CA 92887
800.231.2466 toll-free 714.283.2228 tel 714.283.8493 fax
carefusion.com © 2013 CareFusion Corporation or one of its subsidiaries. All rights reserved. LTV, CareFusion and the CareFusion logo are trademarks or registered trademarks of CareFusion Corporation or one of its subsidiaries. RC2310 (0813/500)