OPMI Movena on S7 Suspension Systems Instruction Issue 3.0

Key to symbols Different symbols used in this manual draw your attention to safety aspects and useful tips. These symbols are explained in the following.

Warning! The warning triangle indicates potential sources of danger which may constitute a risk of injury for the user or a health hazard.

Caution: The square indicates situations which may lead to malfunction, defects, collision or damage of the instrument.

Note: The hand provides hints on the use of the instrument or other tips for the user.

OPMI® is a registered trademark of Carl Zeiss Surgical GmbH.

Contents –

G-30-1567-en

Key to symbols

2

Functions at a glance

7

–

OPMI Movena surgical microscope

8

–

Illumination systems

10

–

S7 floor stand for OPMI Movena

11

–

S7 ceiling mount with rigid column

12

–

S7 ceiling mount with lifting column

13

Safety

15

–

Notes on installation and use

17

–

Safety devices of the suspension system

22

–

Warning labels and notes

26

Description

31

Movena surgical microscope on S7 suspension system

34

–

Intended use

34

–

Description of the system

34

–

System components

36

OPMI Movena surgical microscope

38

–

Controls, displays, connections

38

–

Dovetail mount for Zeiss micromanipulator MM 4 (option)

42

–

Adapter plate for micromanipulators with d= 48 mm (option)

42

–

Binocular tubes and eyepieces

44

S7 floor stand

48

–

Design

48

–

Controls, displays, connections

50

–

Suspension arm

50

–

Carrier arm, stand column, stand base

52

–

Connector panel of S7 floor stand

54

–

Instrument tray (option)

56

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

S7 ceiling mount

58

–

Design

58

–

Controls, displays, connections

60

–

Carrier and suspension arms

60

–

Connector panel of S7 ceiling mount

62

S7 ceiling mount with lifting column

64

–

Design

64

–

Controls, displays, connections

66

–

Ceiling flange with lifting column

66

–

Carrier and suspension arms

68

–

Connector panel of S7 ceiling mount with lifting column

70

Illumination system

72

–

Halogen illumination system

74

–

Xenon illumination system

76

Control panel

78

Preparations for use

85

Attaching the equipment

88

–

Mounting the tube and eyepieces

88

–

Mounting the handgrips (option)

90

–

Mounting the dovetail mount for MM4 micromanipulator (option)

92

–

Mounting the adapter plate for micromanipulators with d=48mm (option)

94

Connections

96

–

Connecting the strain relief device

96

–

Connecting the suspension system - S7 floor stand

98

–

Connecting video and documentation systems (option)

100

Adjusting the system - S7 floor stand

102

–

Balance setting of the suspension arm

102

–

Setting the limit of downward travel of the suspension arm

102

Adjusting the system - S7 ceiling mount with rigid column

104

–

Balance setting of the suspension arm

104

–

Setting the limit of downward travel of the suspension arm

104

Adjusting the system - S7 ceiling mount with lifting column

G-30-1567-en

OPMI® Movena on S7 Suspension Systems

106

Issue 3.0 Printed on 27. 04. 2007

G-30-1567-en

–

Setting an ergonomic working height

106

–

Balance setting of the suspension arm

108

–

Setting the limit of downward travel of the suspension arm

108

Balancing the surgical microscope

110

Adjusting the surgical microscope

114

–

116

Adjusting the laser (option)

Camera settings (option)

118

–

Overview of menus

118

–

Configuring the CCU

120

Relocating the S7 floor stand

134

Operation

137

Checklist

138

Procedure

141

What to do in an emergency

142

–

Failure of the halogen lamp

142

–

Lamp failure of the xenon illumination

144

Maintenance / Further information

147

–

Trouble-shooting

148

–

Changing the halogen lamp

152

–

Changing the xenon lamp module

154

–

Recommended cleaning method

156

–

Cleaning optical surfaces

156

–

Cleaning mechanical surfaces

157

–

Sterilization

157

–

Disinfecting the control keys

158

–

Ordering data

159

–

Spare parts

161

–

Accessories

163

Technical data

165

–

Technical data

166

–

Integrated 1 CCD PAL video camera (option)

173

–

Integrated 1 CCD NTSC video camera (option)

173

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

–

Ambient requirements

175

–

Changes to the system

175

Index

G-30-1567-en

OPMI® Movena on S7 Suspension Systems

177

Issue 3.0 Printed on 27. 04. 2007

7

Functions at a glance

Functions at a glance

G-30-1567-en

OPMI Movena surgical microscope

8

Illumination systems

10

S7 floor stand for OPMI Movena

11

S7 ceiling mount with rigid column

12

S7 ceiling mount with lifting column

13

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

8

Functions at a glance

OPMI Movena surgical microscope 1 2 3 4 5 6 7 8 9 10 11 12 13

G-30-1567-en

Adjusting the eyecup and the prescription Adjusting the friction of the tilt motion Adjusting the friction of lateral tilt axis A Adjusting the balance of lateral tilt axis A Adjusting the friction of the microscope's axis of rotation Setting the magnification Indicating the working distance (200 mm - 415 mm) Setting the focus (working distance 200 mm - 415 mm) Locking knob for focus Adjusting the spot illumination Adjusting the balance of front-to-back tilt axis B Center position of external focus (option) External focus (option)

OPMI® Movena on S7 Suspension Systems

page 46 page 112 page 110 page 110 page 110 page 114 page 40 page 40 page 40 page 40 page 112 page 40 page 40, page 116

Issue 3.0 Printed on 27. 04. 2007

9

Functions at a glance

1

2

3

4

5

A

B

6

G-30-1567-en

6

7

8

9

10

11

OPMI® Movena on S7 Suspension Systems

12

13

Issue 3.0 Printed on 27. 04. 2007

10

Functions at a glance

Illumination systems

2 3 4

Halogen illumination system Closed flap: main lamp is on open flap: backup lamp is on Selecting a filter Opening the lamp module Manual activation of backup lamp

page 23 page 74 page 74

5 6 7 8

Xenon illumination system Selecting a filter Manual activation of backup lamp Opening the lamp module Red segment is lit - backup lamp is in use

page 76 page 76 page 76 page 76

1

1

G-30-1567-en

2

3 4

5

OPMI® Movena on S7 Suspension Systems

page 74

6

7

8

Issue 3.0 Printed on 27. 04. 2007

11

Functions at a glance

S7 floor stand for OPMI Movena 9 10 11 12 13 14 15 16 17 18 19

Lamp housing with halogen or xenon illumination page 72 Adjusting the friction of the carrier arm's swivel movement page 52 Control panel page 78 Maneuvering handle page 52 Connector panel page 54 Steerable casters with locking tabs (4 x) page 52 Adjusting the friction of the suspension arm's page 52 swivel movement Balancing the suspension arm page 102 Adjusting the positioning aid page 50 Adjusting the friction of upward/downward movement page 102 Adjusting the brightness of illumination page 50

9 10 11

12 19

13

18 17 16 14

G-30-1567-en

15

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

12

Functions at a glance

S7 ceiling mount with rigid column 9 10 11 12 13 14 15 16 17

Control panel (only with integrated video system) page 78 Power switch page 78 Connector panel page 62 Lamp housing with halogen or xenon illumination page 72 Balancing the suspension arm page 102 Adjusting the limit of downward travel page 102 Adjusting the friction of upward/downward movement page 50 Adjusting the brightness of illumination page 60 Adjusting the friction of the suspension arm's swivel page 52 movement 18 Adjusting the friction of the carrier arm's swivel movement page 52

17

18

9

10

11

12

13

G-30-1567-en

14

15

16

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

13

Functions at a glance

S7 ceiling mount with lifting column 9 10 11 12 13 14 15 16 17 18 19

Control panel (only with integrated video system) page 78 Power switch page 78 Connector panel page 70 Lamp housing with halogen or xenon illumination page 72 Balancing the suspension arm page 102 Adjusting the limit of downward travel page 50 Adjusting the friction of upward/downward movement page 102 Adjusting the brightness of illumination page 60 Lifting/lowering the lifting column page 66 Adjusting the friction of the carrier arm's swivel movement page 52 Adjusting the friction of the suspension arm's swivel page 52 movement

19 18 9

10

11

17

12

G-30-1567-en

13

14

15

16

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

14

Functions at a glance

G-30-1567-en

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

Safety

15

Notes on installation and use

17

Safety devices of the suspension system

22

Warning labels and notes

26

Safety

G-30-1567-en

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

16

Safety

The device described in this manual has been designed and tested in accordance with Carl Zeiss safety standards as well as German and international standards. This guarantees a high degree of instrument safety. The system described in this user manual has been designed in compliance with the requirements of: –

EN

–

IEC

–

UL

– CSA

In accordance with Directive 93/42/EEC for medical devices, the complete quality management system of the company Carl Zeiss Surgical GmbH, 73446 Oberkochen, Germany, has been certified by DQS Deutsche Gesellschaft zur Zertifizierung von Managementsystemen mbH, a notified body, under registration number 250758 MP23. –

As per Directive 93/42/EEC, the unit is a Class I instrument.

–

For USA: FDA classification Class I.

We would like to provide you with information about safety aspects which must be observed when handling this device. This chapter contains a summary of the most important information concerning matters relevant to instrument safety. Important safety information has been incorporated in this manual and is marked with a warning triangle accordingly. Please give this information your special attention. The correct use of the system is absolutely vital for safe operation. Please make yourself totally familiar with the contents of this manual prior to startup of the instrument. Please also observe the user manuals of any additional equipment. Further information is available from our service department or from authorized representatives.

G-30-1567-en

•

Please observe all applicable accident prevention regulations.

•

The instrument must be connected to a special emergency backup line supply in accordance with the regulations or directives which apply in your country.

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

17

Safety

Notes on installation and use Safe working order •

G-30-1567-en

Do not operate the equipment contained in the delivery package in –

explosion-risk areas,

–

the presence of inflammable anesthetics or volatile solvents such as alcohol, benzine or similar chemicals.

•

Do not station or use the instrument in damp rooms. Do not expose the instrument to water splashes, dripping water or sprayed water.

•

Immediately unplug any equipment that gives off smoke, sparks or strange noises. Do not use the instrument until our service representative has repaired it.

•

Do not place any fluid-filled containers on top of the instrument. Make sure that no fluids can seep into the instrument.

•

Do not force cable connections. If the male and female parts do not readily connect, make sure that they are appropriate for one another. If any of the connectors are damaged, have our service representative repair them.

•

Potential equalization: If requested, the instrument can be incorporated into potential equalization measures.

•

Do not use a mobile phone in the vicinity of the equipment because the radio interference can cause the equipment to malfunction. The effects of radio interference on medical equipment depend on a number of various factors and are therefore entirely unforeseeable.

•

Modifications and repairs on these instruments or instruments used with them may only be performed by our service representative or by other authorized persons.

•

The manufacturer will not accept any liability for damage caused by unauthorized persons tampering with the instrument; this will also forfeit any rights to claim under warranty.

•

Over longer distances (e.g. removal, return for repair, etc), the instrument may only be transported in the original packaging or in special return packaging. Please contact your dealer or the Carl Zeiss service team.

•

Use this instrument only for the applications described.

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

18

Safety

•

Only use the instrument with the accessories supplied. Should you wish to use other accessory equipment, make sure that Carl Zeiss or the equipment manufacturer has certified that its use will not impair the safety of instrument.

•

Only personnel who have undergone training and instruction are allowed to use this instrument. It is the responsibility of the customer or institution operating the equipment to train and instruct all staff using the equipment.

•

Keep the user's manuals where they are easily accessible at all times for the persons operating the instrument.

•

Never look at the sun through the binocular tube, the objective lens or an eyepiece.

•

Do not pull at the light guide cable, at the power cord or at other cable connections.

•

This instrument is a high-grade technological product. To ensure optimum performance and safe working order of the instrument, its safety must be checked once every 12 months. We recommend having this check performed by our service representative as part of regular maintenance work. If a failure occurs which you cannot correct using the trouble-shooting table, attach a sign to the instrument stating it is out of order and contact our service representative.

Warning! Do not use the stored video images for diagnostic purposes, as the video cameras and the monitor have not been calibrated. The visualized images may therefore include deviations in shape, contrast and color. •

Observe the labels showing the symbol "Risk of crushing“!

Notes on EMC (electromagnetic compatibility) The system meets the EMC requirements of IEC 60601-1-2. During use of the system, the precautionary measures concerning EMC listed below must be observed. Only use accessories that have been approved by Carl Zeiss for this system. Do not use any portable or mobile high frequency communication devices in the vicinity of the system, as this may lead to an impairment of its function.

G-30-1567-en

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

19

Safety

The system complies with the limits for a Class A device concerning radio frequency emission. However, the possibility of interference to high frequency receiving devices (e.g. TV sets or radios) being used in the surroundings cannot be ruled out. If interference of this type occurs, please inform your Carl Zeiss Service. Requirements for operation •

For ceiling mounts only: Our service staff or a qualified person appointed by us will install the system on ceiling anchors which have been properly mounted by the construction engineers responsible. These ceiling anchors must comply with the specifications contained in our planning manual.

Our service representative or a specialist authorized by us will install the instrument. Please make sure that the following requirements for operation remain fulfilled in the future: –

All mechanical connections (details in the user's manual) which are relevant to safety are properly connected and screw connections tightened.

–

All cables and plugs are in good working condition.

–

The voltage setting on the instrument conforms to the rated voltage of the line supply on site.

–

The instrument is plugged into a power outlet which has a properly connected protective ground contact.

–

The power cord being used is the one designed for use with this instrument.

Before every use and after re-equipping the instrument

G-30-1567-en

•

Make sure that all ”Requirements for operation” are fulfilled.

•

Go through the checklist.

•

Re-attach or close any covers, panels or caps which have been removed or opened.

•

Pay special attention to warning symbols on the instrument (triangular warning signs with exclamation marks), labels and any parts such as screws or surfaces painted red.

•

Do not cover any ventilation openings.

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007

20

Safety

For every use of the instrument General • Never operate the system unattended. •

Avoid looking directly into the light source, e.g. into the microscope objective lens or a light guide.

•

When the illumination is on, the light guide must be connected at both ends. Otherwise there is a risk of fire or burn injuries.

•

Make sure that the instrument has been switched off before you change the xenon lamp module. When switched on, the ignition system generates high voltage.

•

The xenon illumination system is a high-intensity light source which if used improperly - can cause thermal injury to skin or tissue. Keep the exposed tissue moist and provide sufficient irrigation. Carefully monitor the effects of the illumination on the tissue, in particular in the following cases: – during prolonged procedures on skin and tissue using objective lenses with a short focal length (short working distance), – during procedures on tissue with a low blood supply, – with high brightness settings of the xenon lamp.

•

Since the xenon lamp provides high light intensity and generates light with a spectrum similar to daylight, it must not be used for ophthalmic applications.

•

Any kind of radiation has a detrimental effect on biological tissue.This also applies to the light illuminating the surgical field. Please therefore reduce the brightness and duration of illumination on the surgical field to the absolute minimum required.

S7 floor stand • Using the brake tabs on the base, secure the stand in position. Make sure that the stand is stable and cannot roll away. S7 ceiling mount with lifting column • The lifting column is used to move the microscope into position for surgery prior to the surgical procedure. Do not constantly move the lifting column up and down, since a thermal cut-out will then automatically switch off the drive motor. If this occurs, the lifting column cannot be moved again until the motor has cooled down. After every use of the instrument •

G-30-1567-en

Always use the main power switch of the instrument to turn it off.

OPMI® Movena on S7 Suspension Systems

Issue 3.0 Printed on 27. 04. 2007