ConMed IM8000 Imaging System Orthopaedic Tower Quick Reference User Guide

IM8000 Imaging System Quick Reference User Guide

Orthopaedic Tower This quick user guide includes instruction on the basic set up procedure of the IM8000 Orthopaedic Tower

Turn On Tower 1.1

Ensure the Cart is plugged into Mains Power.

2.2

Turn on each of the device consoles, by pushing the power button.

Procedure Set Up 3.3

3

Using touchscreen, enter Username & Password, Log on to Medicap, Enter patient details

2

3

(See Medicap User Guide)

4.4

5.5

4

Press the “Procedure” button to change the settings to the applicable procedure type for the next case. Connect the wireless footswitch to the shaver console (if required)

9

2

Procedure Start 6.6

Plug Camera paddle into receptacle.

7.4 7 4

Insert Light Guide into receptacle by pushing locking lever to the left and inserting light guide post.

8.8

4

9.9

4

Once the Camera and Light Guide are connected to the Scope perform White Balance by pressing button “1” on the Camera. Alternatively this can be done by pressing the White Balance button on the camera console. Connect other relevant accessories to the corresponding consoles.

9

2

4

8

6

2 7 2

2

(i.e. Shaver Handpeice, Tubing set)

Procedure Completed Disconnect all accessories plugged into consoles (i.e. Camera, Light Guide, etc.)

System Shut Down Turn off each of the device consoles, by pushing the power button. 2

5

CONMED PH 1800 238 238