S5 M-Modules Technical Reference Manual Oct 2003

Responsibility of the manufacturer Datex-Ohmeda Division, Instrumentarium Corp. is responsible for the safety, reliability and performance of the equipment only if: −

assembly, operations, extensions, readjustments, modifications, service and repairs are carried out by personnel authorized by Datex-Ohmeda.

−

the electrical installation complies with appropriate requirements.

−

the equipment is used in accordance with the User’s Guide.

−

the system is serviced, maintained and used in accordance with the Technical Reference Manual.

Trademarks Datex®, Ohmeda®, and other trademarks S/5, AS/3, CS/3, Flexima, D-lite, D-lite+, Pedi-lite, Pedi-lite+, Mini D-fend, D-fend, D-fend+, TruTrak+, OxyTip+, MemCard, ComBar, ComWheel, EarSat, FingerSat, FlexSat, PatientO2, Patient Spirometry and Tonometrics are property of Instrumentarium Corp. or its subsidiaries. All other product and company names are property of their respective owners. Copyright © Copyright Instrumentarium Corp. All rights reserved. All specifications subject to change without notice.

Table of contents

Master Table of Contents Technical Reference Manual, S/5™ Modules 8005674 For S/5™ Anesthesia Monitor and Critical Care Monitor and S/5™ Compact Anesthesia Monitor and Compact Critical Care Monitor Document No. Updated

Updated

Description

8001008 -6

Hemodynamic Modules, M-NE12STPR, M-NE12STR, M-NE12TPR, M-NESTPR, M-NESTR, M-NETPR, M-ESTPR, M-ESTR, M-ETPR

1

8001009 –5

Compact Airway Modules, M-CAiOVX, M-CAiOV,M-CAiO, M-COVX, M-COV, M-CO, M-C

2

8001010 –4

Tonometry Module, M-TONO

3

8001011 –4

EEG Module, M-EEG and EEG Headbox, N-EEG

4

8001012 –4

Cardiac Output Modules, M-COP and M-COPSv

5

8001013 –4

Pressure Module, M-P, Pressure Temp Module, M-PT

6

8001014 –4

Dual Pressure Module, M-PP

7

8001015 –5

NIBP Module, M-NIBP

8

8001016 –3

Recorder Module, M-REC

9

8005426 –1

Oxygen Saturation Modules, M-NSAT, M-OSAT

10

8001018 –4

NeuroMuscular Transmission Module, M-NMT

11

8003840 –1

Anesthesia recordkeeping keyboard for, K-ARKB, Keyboard Interface Board, B-ARK and ARK Barcode Reader, N-SCAN

12

8001020 –5

Memory Module, M-MEM

13

8001021 –4

Interface Module, M-INT

14

8005676

Device Interfacing Solution, N-DISxxxx

15

8003476-2

BIS Module, M-BIS

16

8003934-1

Remote Controllers, K-REMCO, K-CREMCO

17

8003487-3

Single-width Airway Module, M-miniC

18

8004390

Entropy Module, M-ENTROPY

19

i Document No. 8005674

Introduction

INTRODUCTION This Technical Reference Manual provides information for the maintenance and service of the Datex-Ohmeda S/5™ Modules, record keeping keyboard, remote controllers and Device Interfacing System. These Datex-Ohmeda devices are designed for use with S/5™ Anesthesia Monitor, S/5™ Critical Care Montor, S/5™ Compact Anesthesia Monitor, and S/5™ Compact Critical Care Monitor. Please see also the Technical Reference Manual of the S/5 monitor for system specific information e.g. related documentation, conventions used, symbols on equipment, safety precautions, system description, system installation, interfacing, functional check and planned maintenance. For more detailed information about compatibility with different monitor software types and levels se the "Introduction" chapter of the slot of the module or other device.

S/5™ parameter modules, Device Interfacing Solution, Record keeping keyboard and Remote Controller

1 Document No. 8005674

Datex-Ohmeda S/5 Modules

Notes to the reader This Technical Reference Manual is intended for service personnel and engineers who will perform service and maintenance procedures on the Datex-Ohmeda S/5 Anesthesia Monitor,S/5 Critical Care Monitor, S/5 Compact Anesthesia Monitor or S/5 Compact Critical Care Monitor. This Technical Reference Manual completes the Technical Reference Manual of the S/5 Anesthesia Monitor and S/5 Critical Care Monitor or S/5 Compact Anesthesia Monitor and S/5 Compact Critical Care Monitor. •

Document number 8005674 is the order number for the whole printed manual. This manual includes Technical Reference Manual Slots and every slot has own document number.

•

The Technical Reference Manual, S/5 Modules gives detailed descriptions of paramter modules and other products that can be used with all S/5 modular monitors. Service check for each product is included in these slots.

For monitor or system specific information see: The Technical Reference Manual of the S/5 Anesthesia Monitor and S/5 Critical Care Monitor or The Technical Reference Manual of S/5 Compact Anesthesia Monitor and S/5 Compact Critical Care Monitor. The manufacturer reserves the right to change product specifications without prior notice. Although the information in this manual is believed to be accurate and reliable, the manufacturer assumes no responsibility for its use. Datex-Ohmeda assumes no responsibility for the use or reliability of its software in equipment that is not furnished by Datex-Ohmeda.

2 Document No. 8005674

Introduction

Conventions used Throughout this manual, the following conventions are used to distinguish procedures or elements of text:

?

Sign the check form after performing the procedure.

Hard Keys

Hard key names on the Command Board, the Remote Controller, and modules are written in bold D-O Sans (12 pt) typeface, e.g. ECG.

Menu Items

Menu items are written in bold italic, D-O Sans (11 pt) typeface, e.g. ECG Setup.

‘Messages’

Messages displayed on the screen are enclosed in single quotes, e.g. ‘Please wait’.

Chapters

When referring to different chapters in the same manual, the chapter name is written in italic typeface and is enclosed in double quotes, e.g. chapter “Cleaning and Care.”

Other documents When referring to different documents, the document name is written in italic typeface, e.g. refer to User’s Reference Manual. Hypertext links

Hypertext links on PDF versions are written in blue color.

WARNING

Warnings are written in bold typeface (13 pt), for example:

WARNING

Use only hospital-grade electrical outlets and power cord.

CAUTION

Cautions are written in the following way (13 pt):

CAUTION

The circuit boards contain sensitive integrated circuits that can be damaged by an electrostatic discharge. Careful handling of the boards is therefore essential.

3 Document No. 8005674