Accessories and Supplies
24 Pages
Preview
Page 1
GE Healthcare
Datex-Ohmeda S/5 Monitors Supplies and Accessories
Datex-Ohmeda S/5 Monitors Supplies and Accessories
Conformity according to the Council Directive 93/42/EEC concerning Medical Devices CAUTION: U.S. Federal law restricts this device to sale by or on the order of a licensed medical practitioner. Outside the USA, check local laws for any restriction that may apply. All specifications are subject to change without notice. Document no. M1023052-02 October, 2004
Datex-Ohmeda Inc. P.O. Box 7550 Madison, WI 53707-7550, USA Tel: +1-608-221 1551 Fax: +1-608-222 9147
Datex-Ohmeda Division, Instrumentarium Corporation P.O. Box 900 FI-00031 DATEX-OHMEDA, FINLAND Tel: +358 10 39411 Fax: +358 9 1463310
www.us.datex-ohmeda.com
www.datex-ohmeda.com © 2004 General Electric Company. All rights reserved.
Supplies and Accessories
Table of contents 1 About this document
1
2 Instructions for use
3
Multi-Link ECG accessories ... 3 NIBP cuff hoses ... 4 OxyTip+ pulse oximetry accessories... 5 Temperature adapter cables ... 6 Invasive blood pressure adapter cables... 7
3 List of accessories
9
ECG accessories... 10 NIBP accessories... 12 Pulse oximetry accessories ... 13 Temperature accessories ...13 Invasive pressure accessories ... 14 Hemodynamic accessory kits ... 14 Airway gas accessories ... 14 Spirometry accessories... 14 Cardiac Output accessories ... 15 SvO2 accessories... 15 EEG accessories... 15 NMT accessories ... 16 Tonometry accessories ... 16 Entropy accessories... 16 BIS accessories... 16 Mounting elements... 16 Simulators ... 17 Device Interfacing Solution ... 17 Interfacing Cables ... 17 Other ... 18
Supplies and Accessories
1 About this document This document introduces the accessories for the Datex-Ohmeda S/5 monitors, and provides supplemental instructions. Also refer to the “User's Guide.” Some of the information in this document may already be included in the “User's Guide” that you have. For those accessories that do not have instructions for use included in this document, please, refer to the accessory package.
IMPORTANT: This document contains very important information about these accessories and their use, please keep it in a safe place near other user documentation.
WARNING: Use only defibrillator-proof cables and invasive pressure transducers approved by Datex-Ohmeda. Using other cables and transducers may cause a safety hazard. Protection against cardiac defibrillator discharge is due in part to the accessories for pulse oximetry (SpO2), temperature (T), and invasive pressure (P) measurement.
NOTE: Please refer to the “User's Guide” for other warnings and cautions.
Calibration check of temperature, NIBP and invasive blood pressures Calibration check of temperature, NIBP and invasive blood pressures should be performed at least once a year by qualified service personnel. Please see the "Technical Reference Manual."
1
Datex-Ohmeda S/5 Monitors
2
Supplies and Accessories
2 Instructions for use All these accessories are indicated for use by qualified medical personnel only.
Multi-Link ECG accessories R=RED (IEC) RA=WHITE (AAMI)
R/RA
L=YELLOW (IEC) LA=BLACK (AAMI)
LEAD I L/LA
R=RED (IEC) RA=WHITE (AAMI)
L/LA
R/RA V1
II
V2
V3
LEAD III
LE AD
1. Multi-Link 5-lead or 12-lead standard cable
L=YELLOW (IEC) LA=BLACK (AAMI)
V4 V5
V6
1 2
3
4 5
6
F/LL
F=GREEN (IEC) LL=RED (AAMI)
F/LL F=GREEN (IEC) LL=RED (AAMI)
N/RL N=BLACK (IEC) RL=GREEN (AAMI)
1 RA
LA
1
RL
2 345 6
LL
RL RA LA LL V V1
2
V2 V3 V4 V5 V6
3
1
Disinfection Wipe the cleaned product with chemical disinfectant, such as ethanol, isopropanol, phenolic disinfectant or glutaraldehyde. NOTE: Do not immerse the products in liquids. Protect from strong UV radiation. Sterilization
Multi-Link ECG accessories enable ECG monitoring with new Datex-Ohmeda S/5 modules.
Starting measurement
3. 4. 5.
3. Multi-Link leadwire set (C2-C6 IEC, V2-V6 AHA)
2
Intended use
1. 2.
2. Multi-Link leadwire set (3 or 5 leads)
Connect the trunk cable to the monitor. Connect the leadwire set to the trunk cable. • For 3-lead ECG, use the Multi-Link 3-lead ECG cable with integrated leadwires or connect a 3 leadwire set to the Multi-Link 5- or 12-lead ECG trunk cable. • For 5-lead ECG, connect a 5 leadwire set to the MultiLink 5- or 12-lead ECG trunk cable. • For 12-lead ECG, connect a 5 leadwire set together with a 5 leadwire C2 -C6 or V2 -V6 set to the MultiLink 12-lead ECG trunk cable. Prepare the skin: shave any hair from the selected electrode sites, and clean and dry the skin. Attach the electrodes to the correct positions. See the monitor user documentation for instructions on positioning the electrodes. Connect the leadwire set to the electrodes.
Sterilize with ethylene oxide (EtO) at a max. temperature of 50°C/122°F or with STERRAD® Systems. After ethylene oxide sterilization, follow the recommendations of the sterilizer manufacturer for the required aeration period.
Precautions Use only supplies and accessories approved by Datex-Ohmeda for proper and accurate functioning of measurement. Using components other than the ones supplied might result in a measurement error. Ensure proper contact of the electrosurgery unit return electrode to the patient to avoid burns at monitor measurement sites. Do not allow humidity or liquid to enter the cables. Do not use cables if you see any visual signs of damages.
CAUTION
Maintenance
Federal (USA) law restricts this device to sale by or on the order of a physician.
Before use, check that the product is intact and clean. NOTE: Do not treat the cables with oils (like household or lubricating) or aggressive fluids or solvents (like acetone). Cleaning Try to avoid excessive use of liquids. Wipe with a cloth moistened with mild detergent or soap solution. Allow the product to dry completely after cleaning.
Ordering information For further information, please consult the Supplies & Accessories catalog http://supplies.datex-ohmeda.com or your local sales company.
3
Datex-Ohmeda S/5 Monitors
NIBP cuff hoses 1. Cuff hose 2. Cuff of correct size
1 2
X INDE
LINE
Intended use
Sterilization The cuff hoses can be sterilized with ethylene oxide mixture (EtO) at a maximum temperature of +50°C or with STERRAD® Systems. After ethylene oxide sterilization, follow the recommendations from the sterilizer manufacturer for required aeration period.
The cuff hose is used for connecting the NIBP cuffs to new Datex-Ohmeda S/5 modules. The black adult cuff hose includes cuff identification and is recognized by the monitor as an adult cuff hose. The light blue infant hose does not include cuff identification and thus the pediatric NIBP mode has to be selected in the monitor menu.
Precautions
Starting the measurement
Use only supplies and accessories approved by DatexOhmeda for proper and accurate functioning of measurement. Using components other than the ones supplied might result in a measurement error. Mating connectors with force without proper alignment may damage the connectors and prevent proper airflow to the cuff. Make sure no liquid enters the hose.
1.
Connect the cuff hose to the adult size NIBP cuff by placing opposite connectors in contact and locking them together. 2. Plug the NIBP cuff hose to the monitor or module. 3. Refer to the monitor user documentation for detailed information. NOTE: O-rings of hose connectors should be lubricated from time to time.
CAUTION
Maintenance
Federal (USA) law restricts this device to sale by or on the order of a physician.
Cleaning Try to avoid excessive use of liquids. Wipe with a cloth moistened with mild detergent or soap solution.
Ordering information For further information, please consult the Supplies & Accessories catalog http://supplies.datex-ohmeda.com or your local sales company.
Disinfection Disinfect with a chemical disinfectant, such as ethanol (70%), isopropanol, phenolic disinfectant or aldehydes.
4
Supplies and Accessories
OxyTip+ pulse oximetry accessories OXY-E-UN
1. OxyTip+ Interconnect cable
OXY-SE-3
OXY-F-UN
1
OXY-W-UN
OXY-AP
OXY-AF
Sterilization Do not sterilize the sensor or cable.
Intended use OxyTip+ Interconnect Cable connects OxyTip+ SpO2 sensors to new Datex-Ohmeda S/5 modules.
Precautions
Starting the measurement 1. 2.
Use only supplies and accessories approved by DatexOhmeda for proper and accurate functioning of measurement. Using components other than the ones supplied might result in a measurement error. Mating connectors with force without proper alignment may damage the connectors and disrupt the electrical continuity.
Connect the Interconnect Cable to the module. Connect the selected SpO2 sensor to the Interconnect Cable.
Maintenance Cleaning Try to avoid excessive use of liquids. Wipe with a cloth moistened with mild detergent or soap solution. Do not spray or soak the connectors.
CAUTION Federal (USA) law restricts this device to sale by or on the order of a physician.
Ordering information
Disinfection Spray or wip with pad moistened with 70% alcohol or 3.4% gluteraldehyde (Cidex). Although discoloration may occur, you may also use 1.6% phenol (Sporicidin), quaternary germicides (Virex), or 0.5% sodium hypochlorite.
For further information, please consult the Supplies & Accessories catalog http://supplies.datex-ohmeda.com or your local sales company.
5
Datex-Ohmeda S/5 Monitors
Temperature adapter cables 1. Adapter cable for temperature probes
2
2. Reusable temperature probe 2
3. Adapter cable for disposable temperature probes
1
4. Disposable temperature probe interconnect cable
4 1
3
Sterilization Sterilize with ethylene oxide gas (EtO) at a maximum temperature of +50 °C/ 122 °F or with STERRAD® Systems. After ethylene oxide sterilization, follow the recommendations from the sterilizer manufacturer for required aeration period.
Intended use The temperature adapter cables are intended to be used for connecting one or two reusable or disposable temperature probes to new Datex-Ohmeda S/5 modules.
Starting the measurement 1. 2. 3.
Precautions
Connect the adapter cable to the monitor or module. Connect the other end of the adapter cable to the reusable temperature probe or to the disposable temperature interconnect cable. Connect the disposable temperature probe to the disposable temperature probe interconnect cable.
Use only supplies and accessories approved by DatexOhmeda for proper and accurate functioning of the measurement. Substitution of a component with other than that supplied might result in measurement error. Mating connectors with force without proper alignment may damage the connectors and disrupt the electrical continuity.
Maintenance Cleaning Try to avoid excessive use of liquids. Wipe with a cloth moistened with mild detergent or soap solution.
Do not entwine this cable with other electrical cables.
CAUTION
Disinfection Disinfect with a chemical disinfectant, such as ethanol, propanol, phenolic disinfectant or glutaraldehyde NOTE: Do not immerse the cable in liquids.
Federal (USA) law restricts this device to sale by or on the order of a physician.
Ordering information For further information, please consult the Supplies & Accessories catalog http://supplies.datex-ohmeda.com or your local sales company.
6
Supplies and Accessories
Invasive blood pressure adapter cables 1. Adapter cable for the InvBP transducer 2. Transducer 3. Adapter cable for dual InvBP measurement
1
Sterilization Sterilize with ethylene oxide gas (EtO) at a maximum temperature of +50 °C/ 122 °F or with STERRAD® Systems. After ethylene oxide sterilization, follow the recommendations from the sterilizer manufacturer for required aeration period.
Intended use These invasive blood pressure adapter cables are intended to be used for connecting one or two invasive blood pressure transducers to new Datex-Ohmeda S/5 modules.
Starting the measurement 1. 2. 3. 4.
Precautions
Connect the single adapter cable to suitable transducer products for which it is designed. Plug the adapter cable to the module, or to the dual invasive pressure adapter cable if two invasive pressures are monitored simultaneously. Please, refer to the monitor’s user documentation for detailed information. When the invasive blood pressure monitoring is completed, disconnect the cable from the transducer product and monitor.
Use only supplies and accessories approved by DatexOhmeda for proper and accurate functioning of the measurement. Substitution of a component with other than that supplied might result in measurement error. Mating connectors with force without proper alignment may damage the connectors and disrupt the electrical continuity. Do not entwine this cable with other electrical cables.
Maintenance
CAUTION
Cleaning Try to avoid excessive use of liquids. Wipe with a cloth moistened with mild detergent or soap solution. Allow the product to dry completely after cleaning.
Federal (USA) law restricts this device to sale by or on the order of a physician.
Ordering information
Disinfection Wipe the cleaned product with a chemical disinfectant, such as ethanol, propanol, phenolic disinfectant or glutaraldehyde NOTE: Do not immerse the cable in liquids.
For further information, please consult the Supplies & Accessories catalog http://supplies.datex-ohmeda.com or your local sales company.
7
Datex-Ohmeda S/5 Monitors
8
Supplies and Accessories
3 List of accessories The accessories below are approved and specified for the Datex-Ohmeda S/5 monitors. Patient accessories designed for use with these devices are made of biocompatible materials conforming to requirements of the standard EN 30993 Biological Evaluation of Medical Devices and therefore do not contain toxic ingredients or primary skin irritants. The conformity is based either on laboratory testing or material knowledge and the long history of the materials used. Please note that some products are not available worldwide. You can check the availability with your local Datex-Ohmeda office or distributor. Please, also refer to our catalog: http://supplies.datex-ohmeda.com/DO Explanation of symbols Symbol
What it means Batch code Catalog number Does not contain latex Caution, consult accompanying documents Date of manufacture Use by XXX (XXX = expiration date)
9
Datex-Ohmeda S/5 Monitors 412681-005 Multi-Link 5-Leadwire Set , Grouped, Grabber, AHA, Mixed Length - RL, LL, V: 130 cm/51 in, RA, LA: 74 cm/29 in, 5/set 412681-006 Multi-Link 5-Leadwire Set, Grouped, Grabber, IEC, Mixed Length - N, F, C: 130 cm/ 51 in, R,L: 74 cm/29 in, 5/set 412682-001 Multi-Link 3-Leadwire Set, Grouped, Grabber, AHA, 74 cm/29 in, 3/set 412682-002 Multi-Link 3-Leadwire Set, Grouped, Grabber, AHA, 130 cm/51 in, 3/set 412682-003 Multi-Link 3-Leadwire Set, Grouped, Grabber, IEC, 74 cm/29 in, 3/set 412682-004 Multi-Link 3-Leadwire Set, Grouped, Grabber, IEC, 130 cm/51 in, 3/set
ECG accessories Multi-Link 3-lead ECG Trunk Cables 412944-001 Multi-Link 3-lead ECG Trunk Cable, DIN, AAMI/AHA, 3.6 m/12 ft 412944-002 Multi-Link 3-lead ECG Trunk Cable, DIN, IEC, 3.6 m/12 ft
Multi-Link 3-Lead Integrated Cable and Leadwire Systems 2001292-001 Multi-Link 3-Lead ECG Cable with Integrated Grabber Leadwires, AHA, 3.6 m/12 ft 2001292-002 Multi-Link 3-Lead ECG Cable with Integrated Grabber Leadwires, IEC, 3.6 m/12 ft
Multi-Link ECG Leadwire Sets - Individually Replaced - Grabber 414556-001 Multi-Link 5-Leadwire Set, Grabber, AAMI/AHA, 74 cm/29 in, 5/set 414556-002 Multi-Link 5-Leadwire Set, Grabber, AAMI/AHA, 130 cm/51 in, 5/set 414556-003 Multi-Link 5-Leadwire Set, Grabber, IEC, 74 cm/29 in, 5/set 414556-004 Multi-Link 5-Leadwire Set, Grabber, IEC, 130 cm/51 in, 5/set 414556-005 Multi-Link 5-Leadwire Set, Grouped, Grabber, AAMI/AHA, Mixed Length - RL, LL, V: 130 cm/51 in, RA, LA: 74 cm/29 in, 5/set 414556-006 Multi-Link 5-Leadwire Set, Grouped, Grabber, IEC, Mixed Length - N, F, C: 130 cm/51 in, R, L: 74 cm/29 in, 5/set 416467-001 Multi-Link 5-Leadwire Set, Grabber, AAMI/AHA, V2-V6, 130 cm/51 in, 5/set 416467-003 Multi-Link 5-Leadwire Set, Grabber, AAMI/AHA, V2-V6, 74 cm/29 in, 5/set 416467-002 Multi-Link 5-Leadwire Set, Grabber, IEC, C2-C6, 130 cm/51 in, 5/set 416467-004 Multi-Link 5-Leadwire Set, Grabber, IEC, C2-C6, 74 cm/29 in, 5/set
Multi-Link 5-Lead Standard ECG Trunk Cables 412931-001 Multi-Link 5-lead Standard ECG Cable, AHA, 3.6 m/12 ft 412931-002 Multi-Link 5-lead Standard ECG Cable, IEC, 3.6 m/12 ft 412931-021 Multi-Link 5-lead Standard ECG Cable, AHA, 6 m/20 ft 412931-022 Multi-Link 5-lead Standard ECG Cable, IEC, 6 m/20 ft
Multi-Link 12-Lead Standard ECG Trunk Cables 416035-001 Multi-Link 12-lead Standard ECG Cable, AHA, 3.6 m/12 ft 416035-002 Multi-Link 12-lead Standard ECG Cable, IEC, 3.6 m/12 ft 416035-100 Multi-Link V-lead Dust Cap for 12-Lead ECG Cable
Multi-Link ECG Cable Adapters
Multi-Link ECG Leadwires - Individually Replaced Grabber
414370-001 Multi-Link 5-Lead DIN Adapter To convert 5-Lead trunk cable for use with 5-Lead DIN style radiotranslucent leadwires 414370-002 Multi-Link 3-Lead DIN Adapter To convert 5-Lead trunk cable for use with 3-Lead DIN style radiotranslucent leadwires
412680-001 Multi-Link Leadwire, Grabber, Red, LL, AAMI/AHA, 74 cm/29 in 412680-002 Multi-Link Leadwire, Grabber, White, RA, AAMI/AHA, 74 cm/29 in 412680-003 Multi-Link Leadwire, Grabber, Green, RL, AAMI/AHA, 74 cm/29 in 412680-004 Multi-Link Leadwire, Grabber, LA, AAMI/AHA, 74 cm/29 in 412680-005 Multi-Link Leadwire, Grabber, Brown, V1, AAMI/AHA, 74 cm/29 in 412680-101 Multi-Link Leadwire, Grabber, Red, LL, AAMI/AHA, 130 cm/51 in 412680-102 Multi-Link Leadwire, Grabber, White, RA, AAMI/AHA, 130 cm/51 in 412680-103 Multi-Link Leadwire, Grabber, Green, RL, AAMI/AHA, 130 cm/51 in
Multi-Link ECG Leadwire Sets - Grouped - Grabber 412681-001 Multi-Link 5-Leadwire Set, Grouped, Grabber, AHA, 74 cm/29 in, 5/set 412681-002 Multi-Link 5-Leadwire Set, Grouped, Grabber, AHA, 130 cm/51 in, 5/set 412681-003 Multi-Link 5-Leadwire Set , Grouped, Grabber, IEC, 74 cm/29 in, 5/set 412681-004 Multi-Link 5-Leadwire Set, Grouped, Grabber, IEC, 130 cm/51 in, 5/set
10
Supplies and Accessories 412680-104 Multi-Link Leadwire, Grabber, Black, LA, AAMI/AHA, 130 cm/51 in 412680-105 Multi-Link Leadwire, Grabber, Brown, V1, AAMI/AHA, 130 cm/51 in 416447-011 Multi-Link Leadwire, Grabber, Brown, V2, AAMI/AHA, 130 cm/51 in 416447-012 Multi-Link Leadwire, Grabber, Brown, V3, AAMI/AHA, 130 cm/51 in 416447-013 Multi-Link Leadwire, Grabber, Brown, V4, AAMI/AHA, 130 cm/51 in 416447-014 Multi-Link Leadwire, Grabber, Brown, V5, AAMI/AHA, 130 cm/51 in 416447-015 Multi-Link Leadwire, Grabber, Brown, V6, AAMI/AHA, 130 cm/51 in
Multi-Link ECG Leadwire Sets - Grouped - Snap 411202-001 Multi-Link 5-Leadwire Set, Grouped, Snap, AAMI/AHA, 74 cm/29 in, 5/set 411202-002 Multi-Link 5-Leadwire Set, Grouped, Snap, AAMI/AHA, 130 cm/51 in, 5/set 411202-003 Multi-Link 5-Leadwire Set , Grouped, Snap, IEC, 74 cm/29 in, 5/set 411202-004 Multi-Link 5-Leadwire Set, Grouped, Snap, IEC, 130 cm/51 in, 5/set 411202-005 Multi-Link 5-Leadwire Set, Grouped, Snap, AAMI/AHA, Mixed Length - RL,LL,V: 130 cm/ 51 in, RA,LA: 74 cm/29 in, 5/set 411202-006 Multi-Link 5-Leadwire Set, Grouped, Snap, IEC, Mixed Length - RL, LL, V: 130 cm/ 51 in, RA,LA: 74 cm/29 in, 5/set 411203-001 Multi-Link 3-Leadwire Set, Grouped, Snap, AAMI/AHA, 74 cm/29 in, 3/set 411203-002 Multi-Link 3-Leadwire Set, Grouped, Snap, AAMI/AHA, 130 cm/51 in, 3/set 411203-003 Multi-Link 3-Leadwire Set, Grouped, Snap, IEC, 74 cm/29 in, 3/set 411203-004 Multi-Link 3-Leadwire Set, Grouped, Snap, IEC, 130 cm/51 in, 3/set
Multi-Link ECG Leadwire Sets - Individually Replaced - Snap 411200-001 Multi-Link 5-Leadwire Set, Snap, AAMI/AHA, 74 cm/29 in, 5/set 411200-002 Multi-Link 5-Leadwire Set, Snap, AAMI/AHA, 130 cm/51 in, 5/set 411200-003 Multi-Link 5-Leadwire Set, Snap, IEC, 74 cm/29 in, 5/set 411200-004 Multi-Link 5-Leadwire Set, Snap, IEC, 130 cm/51 in, 5/set 411200-005 Multi-Link 5-Leadwire Set, Snap, AAMI/AHA, Mixed Length - RL, LL, V:130 cm/51 in, RA, LA: 74 cm/29 in, 5/set 416468-001 Multi-Link 5-Leadwire Set, Snap, V2-V6, AAMI/AHA, 130 cm/51 in, 5/set 416468-002 Multi-Link 5-Leadwire Set, Snap, C2-C6, IEC, 130 cm/51 in, 5/set 416468-003 Multi-Link 5-Leadwire Set, Snap, V2-V6, AAMI/AHA, 74 cm/29 in, 5/set 416468-004 Multi-Link 5-Leadwire Set, Snap, C2-C6, IEC, 74 cm/29 in, 5/set
Multi-Link ECG Leadwire Sets - Individually Replaced - Universal/Banana Plug 417949-001 Multi-Link Leadwire Set, Universal/Banana Plug, AAMI/AHA, 74 cm/29 in, 5/set 417483-201 Multi-Link Leadwire Set, Universal/Banana Plug, AAMI/AHA, V2-V6, 130 cm/51 in, 5/set 417483-401 Multi-Link Leadwire Set, Universal/Banana Plug, AAMI/AHA, V2-V6, 74 cm/29 in, 5/set
Multi-Link ECG Leadwire Sets - Radiotranslucent 403751-019 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/Grabber, AAMI/AHA, 122 cm/48 in, 5/set 403751-020 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/Grabber, AAMI/AHA, 122 cm/48 in, 10/set 403751-023 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/Grabber, AAMI/AHA, 152 cm/60 in, 5/set 403751-024 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/Grabber, AAMI/AHA, 152 cm/60 in, 10/set 403751-033 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/Grabber, IEC, 152 cm/60 in, C2-C6, 5/set 403751-101 Multi-Link Leadwire Set, Radiotranslucent/ Multi-Link/ Grabber, Gray Generic Connectors, 122 cm/48 in, 5/set
Multi-Link ECG Leadwires - Individually Replaced Snap 412596-001 Multi-Link Leadwire, Snap, AAMI/AHA, LL, 74 cm/29 in 412596-002 Multi-Link Leadwire, Snap, AAMI/AHA, RA, 74 cm/29 in 412596-003 Multi-Link Leadwire, Snap, AAMI/AHA, RL, 74 cm/29 in 412596-004 Multi-Link Leadwire, Snap, AAMI/AHA, LA, 74 cm/29 in 412596-005 Multi-Link Leadwire, Snap, AAMI/AHA, V1, 74 cm/29 in 412596-101 Multi-Link Leadwire, Snap, AAMI/AHA, LL, 130 cm/51 in 412596-102 Multi-Link Leadwire, Snap, AAMI/AHA, RA, 130 cm/51 in 412596-103 Multi-Link Leadwire, Snap, AAMI/AHA, RL, 130 cm/51 in 412596-104 Multi-Link Leadwire, Snap, AAMI/AHA, LA, 130 cm/51 in 412596-105 Multi-Link Leadwire, Snap, AAMI/AHA, V1, 130 cm/51 in
Multi-Link ECG Leadwire Sets - Radiotranslucent Grabber/ DIN Connectors - Sets 403751-007 Leadwire Set, Radiotranslucent, Grabber/DIN, AAMI/AHA, 122 cm/48 in, 5/set
11
Datex-Ohmeda S/5 Monitors 403751-009 Leadwire Set, Radiotranslucent, Grabber/DIN, AAMI/AHA, 152 cm/60 in, 5/set 403751-014 Leadwire Set, Radiotranslucent, Grabber/DIN, IEC, 122 cm/48 in, 5/set 403751-015 Leadwire Set, Radiotranslucent, Grabber/DIN, AAMI/AHA, limb leads, 5/set
Leadwire sets, AAMI color coding 545317 3 Leadwire Set, clip, 0.75 m/2.5 ft 545318 5 Leadwire Set, clip, 1.25 m/4.1 ft 545327 3 Leadwire Set, snap, 0.75 m/2.5 ft 545328 5 Leadwire Set, snap, 1.25 m/4.1 ft 8001958 3 Leadwire Set, clip, 1.5 m/4.9 ft 8001959 5 Leadwire Set, clip, 1.5 m/4.9 ft
Multi-Link ECG Leadwire Sets - Radiotranslucent Grabber/DIN Connectors - Individually Replaced
Replacement Leads: IEC
403751-006 Leadwire Set, Radiotranslucent, Grabber/DIN, AAMI/AHA, 122 cm/48 in 403751-008 Leadwire Set, Radiotranslucent, Grabber/DIN, AAMI/AHA, 152 cm/60 in
545340 545341 545342 545343 545347 545348
Multi-Link Cable and Leadwire Management Accessories 411195-004 Multi-Link Combiner, 5-lead, Limb Lead, 3/pack 414763-002 Multi-Link Leadwire Separator, 3-lead, Limb Lead 416212-001 Multi-Link Bedsheet Clip 401498-004 ECG Cable Clips, 50/pack
Clip Lead R, 0.75 m/2.5 ft Clip Lead F, 0.75 m/2.5 ft Clip Lead L, 0.75 m/2.5 ft Clip Lead C, 0.75 m/2.5 ft Clip Lead F, 1.25 m/4.1 ft Clip Lead N, 1.25 m/4.1 ft
Replacement Leads: AAMI/AHA 545344 Clip Lead LA, 0.75 m/2.5 ft 545345 Clip Lead V, 0.75 m/2.5 ft 545358 Clip Lead LL, 0.75 m/2.5 ft 545359 Clip Lead RA, 0.75 m/2.5 ft 545346 Clip Lead LL, 1.25 m/4.1 ft 545349 Clip Lead RL, 1.25 m/4.1 ft 545350 Snap Lead LL, 0.75 m/2.5 ft 545351 Snap Lead LA, 0.75 m/2.5 ft 545352 Snap Lead RA, 0.75 m/2.5 ft 545353 Snap Lead V, 0.75 m/2.5 ft 545354 Snap Lead LL, 1.25 m/4.1 ft 545355 Snap Lead RL, 1.25 m/4.1 ft 8003274 Clip Lead LL, 1.5 m/4.9 ft 8003275 Clip Lead V, 1.5 m/4.9 ft 8003276 Clip Lead RL, 1.5 m/4.9 ft
Compatibility ECG Trunk Cables - for using 300 series leadwire sets below M1020453 Compatibility ECG Trunk Cable, 3-lead, from Multi-Link connector to 300 Series Leadset, IEC, 3.0 m/10 ft M1020454 Compatibility ECG Trunk Cable, 3-lead, from Multi-Link connector to 300 Series Leadset, AHA, 3.0 m/10 ft M1020541 Compatibility ECG Trunk Cable, 5-lead, from Multi-Link connector to 300 Series Leadset, IEC, 3.0 m/10 ft M1020546 Compatibility ECG Trunk Cable, 5-lead, from Multi-Link connector to 300 Series Leadset, AHA, 3.0 m/10 ft
NIBP accessories NOTE: The NIBP measurement is intended for patients who weigh 5 kg (11 lb) and up. NOTE: The NIBP cuffs listed below are latex-free.
300 Series Leadwire Sets - when using Compatibility ECG Trunk Cables above
2021285-001 Adult NIBP cuff hose with cuff identification, black, 3.6 m/12 ft 414874-001 Infant/Neonatal NIBP cuff hose, without cuff identification, light blue 330085 Cuff adapter from male/male to male/female 8001997 Thigh NIBP cuff, 44 - 57 cm / 17.3 – 22.4 in
Leadwire sets, IEC color coding 545315 3 Leadwire Set, clip, 0.75 m/2.5 ft 545316 5 Leadwire Set, clip, 1.25 m/4.1 ft 8001960 3 Leadwire Set, clip, 1.5 m/4.9 ft 8001961 5 Leadwire Set, clip, 1.5 m/4.9 ft
12
Supplies and Accessories
Reusable Dura-Cufs
Disposable cuffs
NOTE: Dura-Cufs are reusable and interchangeable with the reusable color coded cuffs of the same size listed below. 2751 Dura-Cuf, Child, Green, 12 - 19 cm / 4.7 – 7.4 in, pkg of 5 pcs 2752 Dura-Cuf, Small Adult, Royal Blue, 17 - 25 cm / 6.7 – 9.8 in, pkg of 5 pcs 2753 Dura-Cuf, Adult, Navy, 23 - 33 cm / 9 – 13 in, pkg of 5 pcs 002756 Dura-Cuf, Adult Long, Navy, 23 - 33 cm / 9 – 13 in, pkg of 5 pcs 2754 Dura-Cuf, Large Adult, Wine, 31 - 40 cm / 12.2 – 15.7 in, pkg of 5 pcs 002757 Dura-Cuf, Large Adult Long, Wine, 31 - 40 cm / 12.2 – 15.7 in, pkg of 5 pcs 2755 Dura-Cuf, Thigh, Brown, 38 - 50 cm / 15 – 19.7 in, pkg of 5 pcs 2751E Dura-Cuf, Child, Green, 12 - 19 cm / 4.7 – 7.5 in, pkg of 1 pcs 2752E Dura-Cuf, Small Adult, Royal Blue, 17 - 25 cm / 6.7 – 9.8 in, pkg of 1 pcs 2753E Dura-Cuf, Adult, Navy, 23 - 33 cm / 9 – 13 in, pkg of 1 pcs 002756E Dura-Cuf, Adult Long, Navy, 23 - 33 cm / 9 – 13 in, pkg of 1 pcs 2754E Dura-Cuf, Large Adult, Wine, 31 - 40 cm, / 12.2 – 15.7 in, pkg of 1 pcs 002757E Dura-Cuf, Large Adult Long, Wine, 31 - 40 cm / 12.2 – 15.7 in, pkg of 1 pcs 2755E Dura-Cuf, Thigh, Brown, 38 - 50 cm / 15 – 19.7 in, pkg of 1 pcs
8001991 Long large adult cuff, pkg of 10 pcs 8001992 Large adult cuff, pkg of 10 pcs 8002562 Long standard adult cuff, pkg of 10 pcs 8001993 Standard adult cuff, pkg of 10 pcs 8001994 Small adult cuff, pkg of 10 pcs 8001995 Child cuff, pkg of 10 pcs 572403 Infant cuff #3, pkg of 10 pcs 572404 Infant cuff #4, pkg of 10 pcs 572405 Infant cuff #5, pkg of 10 pcs
Reusable color coded latex-free cuffs
Temperature accessories
572429 Large adult cuff, red 572428 Standard adult cuff, blue 572427 Small adult cuff, gray 572426 Child cuff, green 572425 Infant cuff, tan 8002248 Long large adult cuff, red 8001997 Thigh NIBP cuff
402015-004 Dual temperature cable, 20 cm / 8 in, accepts YSI 400 series probes 2022009-001 Single temperature adapter cable, 20 cm / 8 in, accepts YSI 400 series probes 165640 Extension cable for disposable temperature probes, 1.3 m/4.3 ft 165641 Extension cable for disposable temperature probes, 2.83 m/9 ft
Pulse oximetry accessories OXY-ES3
OxyTip+ Interconnect Cable
OxyTip+ Reusable SpO2 Sensors OXY-E-UN
OxyTip+ Interconnect Ear Sensor with Universal connector OXY-SE-3 OxyTip+ Sensitive Skin Sensor OXY-F-UN OxyTip+ Interconnect Finger Sensor with Universal connector OXY-W-UN OxyTip+ Interconnect Wrap sensor with Universal connector
OxyTip+ Adhesive Sensors OXY-AP OXY-AF
Disposable Soft-Cufs
OxyTip+ Adult/Pediatric Adhesive Sensor (10/package, 25/package) OxyTip+ AllFit Adhesive Sensor (10/package)
Reusable probes
NOTE: Soft-Cufs are disposable and interchangeable with the disposable cuffs of the same size listed below. 2451 Soft-Cuf, Child, Green/White, 12 -19 cm / 4.7 – 7.5 in, pkg of 20 pcs 2452 Soft-Cuf, Small Adult, Lt. Blue/White, 17 - 25 cm / 6.7 – 9.8 in, pkg of 20 pcs 2453 Soft-Cuf, Adult, Navy/White, 23 - 33 cm / 9 – 13 in, pkg of 20 pcs 2454 Soft-Cuf, Adult Long, Navy/White, 23 - 33 cm / 9 – 13 in, pkg of 20 pcs 2455 Soft-Cuf, Large Adult, Rose/White, 31 - 40 cm, pkg of 20 pcs 2456 Soft-Cuf, Large Adult Long, Rose/White, 31 - 40 cm / / 12.2 – 15.7 in, pkg of 20 pcs 2457 Soft-Cuf, Thigh, Brown/White, 38 - 50 cm / 15 – 19.7 in, pkg of 20 pcs
16560 165602 16561 165622 165611 165612
Skin temp probe, 3.5 m/11.5 ft Skin temp probe, 1.5 m/4.9ft Central temp probe, adult, 2.8 m/9 ft Central temp probe, adult, 1.5 m/4.9 ft Central temp probe, pedi, 2.8 m/9 ft Central temp probe, pedi, 1.5 m/4.9 ft
Disposable probes 8001642 Skin temperature probe, pkg of 25 8001643 Central temperature probe 12F, pkg of 25 pcs 8001644 Central temperature probe 9F, pkg of 25 pcs
13
Datex-Ohmeda S/5 Monitors 733162 733163
Esophageal stethoscopes 8002910 Esophageal stethoscope with temperature probe, 9F 8002911 Esophageal stethoscope with temperature probe, 12F 8002908 Esophageal stethoscope with temperature probe, 18F 8002909 Esophageal stethoscope with temperature probe, 24F
Calibration accessories 755532 755534 755580 755583
8001540 For ET tubes with ID 2.5 mm, pkg of 10 pcs 8001541 For ET tubes with ID 3.0 mm, pkg of 10 pcs 8001542 For ET tubes with ID 3.5 mm, pkg of 10 pcs 8001543 Pediatric adapter, 4.0 mm, pkg of 10 pcs 8000062 For ET tubes with ID 4.5 mm, pkg of 10 pcs 8000063 For ET tubes with ID 5.0 mm, pkg of 10 pcs
2005772-001 Dual invasive blood pressure adapter cable 700078-001 Utah transducer adapter cable 700077-001 Becton & Dickinson transducer adapter cable
Hemodynamic accessory kits M1022222 M1022225 M1022227 M1023471
Miscellaneous
Basic accessory kit for new S/5 modules, IEC Basic accessory kit for new S/5 modules, AAMI/AHA Advanced accessory kit for new S/5 modules, IEC Advanced accessory kit for new S/5 modules with ECG snaps, AAMI/AHA Advanced accessory kit for new S/5 modules with ECG grabbers, AAMI/AHA
M1026708 Adapter for Gas Return, 22 mm M/22 mm F M1026709 Exhaust Line for Gas Return or Scavenging
Spirometry accessories 879966 884202
Spirometry Demo Set Up Spirometry tester
Spirometry accessory kits
Airway gas accessories
889560 894255 8002718 8004381
8002174 Mini D-fend, pkg of 10 pcs 876107 D-fend water trap container, 5 pcs
Disposable airway adapters
8004382
73385 73386 733856 733866
Sensors
Straight T-adapter, pkg of 10 pcs Elbow adapter, pkg of 10 pcs Straight T-adapter, pkg of 100 pcs Elbow adapter, pkg of 100 pcs
Spirometry Accessory Kit, 50 pcs Spirometry kit patient spirometry kit for ICU Pediatric Spirometry Kit, pkg of 50 pcs Spirometry Kit for humid conditions, 2 m/7 ft, 20 pcs Spirometry Kit for humid conditions, 3 m/10 ft, 20 pcs
733950 D-lite sensor, disposable, 50 pcs 896952 D-lite+ sensor, pkg of 50 pcs 8001948 Pedi lite+ spirometry sensor, disposable, humid conditions, pkg of 50 pcs 73393 Pedi-lite sensor, reusable 733910 D-lite sensor, reusable, transparent yellow
Anesthesia gas sampling lines 73318 73319 733188 733199 73306 733170
Disposable, 2 m/7 ft, pkg of 10 pcs Disposable, 3 m/10 ft, pkg of 10 pcs Disposable, 2 m/7 ft, pkg of 100 pcs Disposable, 3 m/10 ft, pkg of 100 pcs Disposable, 6 m/19.7 ft, pkg of 5 pcs Sampling line, 3 m/10 ft, male/male elbow, 10 pcs 8004383 Anesthesia gas sampling line 3 m/10 ft, elbow connector, 10 pcs
Tubes 884101 884105 890031 891191
Sampling lines 878033 878034 878035
Adapter for calibration regulator D-gate calibration gas regulator Quick Cal calibration gas, pkg of 4 pcs Calibration gas, CO2, O2, N2O, DESF, 1 can
Low dead space adapters
Invasive pressure accessories
M1022220
CO2 Sampling line, 2 m/7 ft, M/M luer, 10 pcs CO2 Sampling line, 3 m/10 ft, M/M luer, 10 pcs
Nasal sampling line, pediatric, pkg of 10 pcs Nasal sampling line, adult, pkg of 10 pcs Nasal sampling line, large adult, pkg of 10 pcs
14
Spirometry tube, 3 m/10 ft, yellow, 5 pcs Spirometry tube, 3 m/10 ft, green, 5 pcs Spirometry tube, 2 m/7 ft, yellow, 5 pcs Spirometry tube, 6 m/20 ft, yellow, 5 pcs
Supplies and Accessories
Cardiac Output accessories
EEG electrodes and paste
16573 16574 16590 16591 16592 16593
75349
Thermodilution catheter 93A-131H-7F C.O.-set for room temperature injectate, 10 pcs C.O. catheter connecting cable Injectate bath temperature probe Flow-through injectate temperature probe Spectramed C.O. set temperature probe
572685 572686
EEG individual leads
SvO2 accessories 165790
898038 898039 898150
SvO2 Optical Module
Cables InvBP Interface Cable, Baxter Transducers InvBP Interface Cable, Becton-Dickinson Transducer 8002735 InvBP Interface Cable, Abbott Transducers 8002736 InvBP Interface Cable, Utah Transducers 54586 Adapter cable, Spectramed DTX transducer 875408 Adapter cable, HP1290C InvBP transducer M1002425 Interface Cable for Datex/S-W
898040 898041 898042 898043 898045 898046 898144 898147
Flusing sets and kits, pressure kit Flushing set for InvBP catheter, 5 pcs Flushing kit for 16576, 10 pcs Flushing kit for SensoNor 844 transducer, 10 pcs M1002427 Biotrans Single Pressure Kit, sterile. W. CE mark
898044 898143 898145 898146 898148 898149
Domes
898050 898051 898052 898151 898152 898153 898154 898155
InvBP transducer, SensoNor 844, 50uV/V/cmHg InvBP transducer,P10EZ, 50uV/V/cmHg
Miscellaneous
2 Channel bipolar leadset (basic/clip) 4 Channel bipolar leadset (general/cup) AEP leadset (clip) Empty EEG leadset 4 Empty EEG leadset 5 Empty EEG leadset 6 Empty EEG leadset 7 Empty EEG leadset 8
EEG simulator cables
16579 Holder for REF 78000 InvBP Transducer M1002423 Biotrans Base Plate
78026
Simulator-cable, AEP cable, 90 cm/3 ft, 100ohm resistor 78027 Simulator-cable, SEP cable, 90 cm/3 ft, Signal+/-200V and 200mA 78029 Simulator-cable, Power/Data cable for EEG Simulator, 90 cm/3 ft 8001485 EEG cable for EEG-simulator
EEG accessories Evoked potential accessories 8001000 8001233 8001234 8001484
Individual EEG lead blue clip, ref. Individual EEG lead blue cup, ref. Individual EEG lead yellow clip, ref. Individual EEG lead yellow cup, ref. Individual EEG lead green clip, ref. Individual EEG lead green cup, ref.
EEG lead sets
Dome for InvBP transd. 16576, 50 pcs Dome for SensoNor 844 InvBP transducer, 50 pcs
Transducers 165700
Individual EEG lead red clip, bip. Individual EEG lead red cup, bip. Individual EEG lead blue clip, bip. Individual EEG lead blue cup, bip. Individual EEG lead yellow cup, bip. Individual EEG lead green cup, bip. Individual EEG lead blue clip, bip. Individual EEG lead green clip, bip.
EEG individual leads, referential
16571 16577 78001
78000
Individual EEG lead black ground clip Individual EEG lead black ground cup Individual EEG lead empty
EEG individual leads, bipolar
8002733 8002734
16578 78002
EEG paste for electrodes, electrode cream, water soluble, 100 g tube Electrode-set, low-impedance electrodes, 15 pouches of 5 pcs Electrode-set, cup electrodes, Ag/Agcl, 500pcs/box
Earphone, EEG accessory Ear tips for AEP earphone set, pkg of 20 pcs Ear tip for individual earphone, pkg of 10 pcs EEG simulator set
Miscellaneous 8002167 Universal power adapter, 90-264 VAC, 5VDC
15
Datex-Ohmeda S/5 Monitors
NMT accessories
Mounting elements
NMT sensors 888416 888418 897439
Holders for Remote controller and Command bars
E-NMT ElectroSensor E-NMT MechanoSensor Pediatric MechanoSensor
NMT cables
8000065 8001952 8001953
888414 888415
Mounts for Modular Monitor displays
E-NMT Sensor Cable, 3 m/10 ft E-NMT Sensor Cable, 1 m/3 ft
M1001527
Miscellaneous
M1001542
57268 NMT electrodes, Ag/AgCl, 30 pcs 888417 E-NMT Regional Block Adapter 8002717 NMT Start-up Kit
M1001552 M1001703
Tonometry accessories 755580 733251 TONO-14F TONO-16F TONO-18F TONO-8F
M1001704
Calibration gas, CO2, bal Air, 4 pcs Calibration gas sampling line for tonometry, 35 cm/14 in Tonometry catheter, 14F with biofilter, pkg of 5 pcs Tonometry catheter, 16F with biofilter, pkg of 5 pcs Tonometry catheter, 18F with biofilter, pkg of 5 pcs Tonometry catheter, 8F with biofilter, pkg of 5 pcs
M1030852
8005351
LCD Display Ceiling Mount (D-LCC12A, D-LCC17 and D-LCC19) LCD Display Pivot Wall Mount (D-LCC12A, D-LCC15, D-LCC17 and D-LCC19) LCD Display Wall Mount (D-LCC12A, D-LCC15, D-LCC17 and D-LCC19) LCD Display Pedestal Mount (D-LCC12A, D-LCC15, D-LCC17 and D-LCC19) LCD Display Flush Wall Mount (D-LCC12A, D-LCC15, D-LCC17 and D-LCC19) Plasma Display Wall Mount (D-MMP42)
Mounts for Modular Monitoring frames M1027908 M1027909 M1027910 M1027911 M1035232
Entropy accessories 8002858 8002964
Remote control holder (K-REMCO & K-CREMCO) Command bar frame holder (K-ANEB & K-ICUB) Command bar table holder (K-ANEB & K-ICUB)
M1001702 881885 880446 882342
Entropy sensor for adult use, pkg of 25 pcs Ent-3 Entropy Sensor Interface Cable 3 m/10 ft Entropy Sensor Start-up Kit
Holder for S/5 Command bar K-ANEB or S/5 Command bar K-ICUB Wall Mount Hanger for S/5 F-CU5 Table Holder for S/5 F-CU5 Adapter Plate for S/5 F-CU5 Power Adapter Mount for F-CU5 Power Unit N-AC Hanger for S/5 Monitor Frame Vertical Mount for Central Unit Airway module mount Extension frame mounting plate
Mounts for Portable monitors
BIS accessories
572238
545780 545781 545782 545783 900510 8005322
8000725 8000726 572235 887053 886172
PIC+ cable BIS sensor plus, box of 25 pcs BIS sensor pediatric, box of 25 pcs BIS sensor xp, box of 25 pcs Converter, set of DSC-XP with PIC+ Cable Aspect demo device flex circuit plus
Portable monitor wall mount 15”, pivoting arm Portable monitor wall mount 12", fixed arm Portable monitor counter top mount Portable monitors roll stand Compact monitor universal mounting plate Compact monitor bed mount
Other mounts 8001460 892776 57225
16
Small device mount Universal accessory bracket Accessory bracket
Supplies and Accessories 888525
Simulators M1010831
888643
Hemodynamic simulator
892873
Adapter cables for for simulators M1010832 M1010858 M1010846 M1010862 871251 N-ES 8001484
882404 882435 891009 882989 884988 889352
Adapter cable for temperature simulator (Fluke Biomedical MedSim) Adapter cable for invasive blood pressure simulator (Fluke Biomedical MedSim) Adapter cable for temperature simulator (Fluke Biomedical Lionheart & MPS450) Adapter cable for invasive blood pressure simulator (Fluke Biomedical Lionheart & MPS450) NMT simulator Entropy simulator EEG simulator
886826 891965 8002083 8001117
Device Interfacing Solution
881154
8001460 8001461 8001433 900501 900502 900503
889340
Small device mount Small IV pole mount BUS extension cable Cable, 1 m/3 ft Cable, 2 m/7 ft Cable, 6 m/20 ft
8001433 78030 78031 78032
Interfacing Cables Interface cables for modular system monitors 884297 884298 884299 545581 887245 890928 713701 892377 892380 892385 894910 882353 881167 882552 889314 889308 889311 713695 892095
Display Controller – LCD cable, LCD Display Interface Cable, 2.5 m/8 ft Display Controller – LCD cable, LCD Display Interface Cable, 10 m/33 ft Display Controller – CD cable, LCD Display Interface Cable, 1 m/3 ft UPI – ECG Synchronization Output Box UPI Input – Output Connector Extender UPI Input – Output Y-cable M-PT – Datascope IABP Cable, 6 m/20 ft M-PT – Kontron IABP Cable, 6 m/20 ft M-PT Universal ECG/P3 Output Cable, 6 m/20 ft ADU – AS/3 Monitor Cable, 120 cm/4 ft Remote Controller – Compact Monitor Cable, 6 m/20 ft Datex-Ohmeda S/5 K-ANEB/K-ICUB Cable, 5 m/16 ft Datex-Ohmeda S/5 ARK Keyboard – Monitor Cable, 2 m/6 ft Datex-Ohmeda S/5 ARK Keyboard – LCD Cable, 1.5 m/5 ft Datex-Ohmeda S/5 ARK Keyboard – LCD Cable, 2.5 m/8 ft Bus Extension cable for Device Interfacing Solutions, 2 m/6 ft CM1 Serial to Parallel Converter. CM1 – Converter Interface Cable, Modem Cable, 1.8 m/6 ft, connectors: D9F and D25 Converter – Printer Cable, connectors: D25F/D25F
F-CU5 cables M1021340 M1021341 M1021337 M1021338 M1021339
B-GAS Interface Cable, 20 cm/8 in B-GAS Interface Cable, 70 cm/28 in B-GAS Interface Cable, 2.5 m/8 ft Datex-Ohmeda Display Power Cord, for D-VNC15 (EUR/USA) UPI – Datex-Ohmeda Monitor Cable, 2 m/7 ft UPI – Printer Parallel Interface Cable, 3 m/10 ft Datex-Ohmeda UPI4 – Printer Parallel Interface Cable, 3 m / 10 ft INT - External Device Cable 2 m/7 ft INT – Nellcor Cable, 2 m/7 ft INT – Baxter Vigilance Cable, 2 m/7 ft INT – Julian/Cicero Cable, 2 m/7 ft B-INT Interface Connector Cable UPI – PC Serial Cable, 3 m/10 ft UPI – PC Data Collection Software, 3.5” disc Display Controller Y-Cable B-UPINET Y-Cable w/ECG Output B-UPINET – Datex-Ohmeda monitor cable Video Cable, 15 m/50 ft BNC connectors Video Cable, 10 m/33 ft, D15 male/female connectors
F-CPU Power cable 0.4m, power cable for F-CU5 F-CPU Power cable 2.7m, power cable for F-CU5 F-CPU Signal cable 0.3m, signal cable for F-CU5 F-CPU Signal cable 3.0m, signal cable for F-CU5 F-CPU Signal cable 10.0m, signal cable for F-CU5
Interface cables for configured monitors 887245 874569
883624 883857 883855 884011 883856
17
UPI – Datex-Ohmeda Monitor Cable, 2 m/7 ft CC II/CC – Gas monitor cable: Cardiocap II CH-models, Cardiocap models CM, CMO, CTO – Capnomac II, Capnomac, Multicap, Normocap 200 CC II/CC – Capnomac Ultima cable: Cardiocap II CH models, Cardiocap models CM, CMO, CTO – Capnomac Ultima Datex-Ohmeda monitor – PC cable: Datex-Ohmeda monitor – IBM compatible computer, 9 pin connector for PC. Datex-Ohmeda monitor – PC cable: Datex-Ohmeda monitor – IBM compatible computer, 25 pin connector for PC. ADU – Capnomac Ultima cable: Datex-Ohmeda ADU – Capnomac Ultima Cable Whiteline monitor – printer cable, to connect monitor to HP ThinkJet and EPSON