Parts List and Quick Setup Guide
2 Pages
Preview
Page 1
fms solo Parts List ®
Ports and Connectors on the Back
1 On/Off Switch
4 Shaver Interface Port
2 Fuses
5 Foot Pedal Port
Basic Features on the Front
1
3 Power Socket Transparent Safety Cover 1
8
Pressure Display
Tension Rocker Arm 2
9
Power Button
® Advanced Irrigation Pump
1
IP54
Irrigation Auto-Locking Port. 4
SHAVER INTERFACE
4
®
N
T
2
GA
Irrigation Roller Pump 3
SERIAL NUMBER :
TYPE B CLASS I
IO
IRRI
REF : 4580
10 Alarm
Advanced Irrigation Pump
3
®
11 Pressure Transducer Port
8
0197
2
5
INPUT POWER: 120/230V~50-60Hz
500VA
3
Tube Holder. 5 FOOT PEDAL
REPLACE FUSES AS MARKED
4
6
9
ALARM
12 Pump Run/Stop Button
10
Fill Chamber
5
Fill Chamber Button 6
DO NOT REMOVE CONNECTOR WITHOUT CAUTION : HAVING TURNED OFF THE DEVICE.
RUN/STOP
PRESSURE
Pressure Cycle
Remote Control
pressure
Run
13 Pressure Adjustment Buttons
Stop
Fill Chamber Holder 7
11
12
13
14 Pressure Cycle Button
14
7
Irrigation Tube
[Red Surface]
Clamp
Pressure Chamber
Auto-Locking Device
Clamp
Clamp [One-Color 185]
Intermediary Irrigation Tube without One-way Valve INFLOW
Clamp
[Black&White Only]
Shaver Interface Cable
fms solo® Power Cable
Foot Pedal
[dark backgrounds] PRESSURE CYCLE
Shaver Interface Power Cable
P/N 901012. Rev. A 03/08
©DePuy Mitek, Inc. 2008. All rights reserved. Printed in the USA.
1-800-382-4682
www.depuymitek.com[light backgrounds] 2 Portals in the knee Red pedal is a timed cycle to control bleeding Irrigation tube
s o l o ® f m s S e t u p D i a g r a m Q
U
I
C
K
S
E
T
U
P
G
U
I
D
E
fms solo
®
Fluid Management System with Shaver Interface (Disposable Tubing Setup)
Sterile procedures should be followed wherever appropriate. (Reference Product Manuals and Instructions For Use for complete instructions)
[light backgrounds]
fms solo
®
Q u i c k S e t u p G u i d e ( f o r D i s p o s a b l e Tu b i n g )
A. Connecting the Irrigation Tube
1
c
a: Insert power cable into socket. b: Attach the foot pedal connector to the port. c: Attach shaver interface connector to the port.
e
SHAVER INTERFACE
b
a
f
g
d: Insert power cable into interface cable.
PRESSURE CYCLE
e: Connect interface cable to shaver box.
d
f: Connect shaver to interface cable. g: Insert power cables into wall socket.
a
a
Advanced Irrigation Pump
IRRI
N
T
®
GA
Advanced Irrigation Pump
Advanced Irrigation Pump
IR RI
GA
IO
®
N
IO
®
N
T
IO
T
b: Place and center the tube around the roller. Pull on the tube and close the tension rocker arm against the tube.
b
GA
3
a: Lift lids and roller arm, then slide the green part of the tube into the auto-locking feature on the pump.
a
I RRI
2
a: Remove irrigation tube from the package and close three (3) white clamps on the irrigation tube.
Fill Chamber
Fill Chamber
Fill Chamber
c: Position the pressure chamber in the holder.
G
c
d: Twist cap off of the pressure transducer tube.
d
4
a: Connect the pressure transducer tube into the fill chamber port. Turn clockwise until snug.
b
a
d ®
Fill Chamber
b: Turn pump on by pressing I switch on back.
Advanced Irrigation Pump
CAUTION :
®
®
ELECTRIC SHOCK HAZARD. DO NOT REMOVE COVER REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Advanced Irrigation Pump
VORSICHT :
REF : 4580
ATTENTION :
DECKEL NICHT ENTFERNEN-ELEKTROSCHOCKGEFAHR! SERVICE NUR VON EINGEWIESENEM FACHPERSONAL DURCHFÜHREN LASSEN
PRISE ELECTRIQUE-NE PAS ENLEVER LE COURVERCLE. NE METTRE EN SERVICE QUE PAR DU PERSONNEL QUALIFIE.
SERIAL NUMBER :
c: Close lid and press POWER STAND-BY button.
ALARM DISTRIBUTED BY:
TYPE B CLASS I
GR OUP
IP54
Fill Chamber
FUTURE MEDICAL SYSTEMS SA 38 Chemin du Grand-Puits 1217 GENEVA SWITZERLAND
FUTURE MEDICAL SYSTEMS SA 265, Route de la Baronne 06640 SAINT JEANNET FRANCE
0197
PRESSURE
RUN/STOP
SHAVER INTERFACE
LEGAL MANUFACTURER:
pressure
c
Stop
www.fmsgroup.com
d: Remove caps off irrigation spikes.
IMPORTANT WARNING The Manufacturer and Licensed Seller of thi sdevice do not accept any liability for direct or consequential damage or injury caused by its improper use, or usage of disposables other than FMS products. Any alteration to this device, repair from unlicensed service center, or use of non FMS disposables will void CE marking, warranty, and product liability coverage.
INPUT POWER: 120/230V~50-60Hz
500VA
This device is covered under the following patents: US PATENT 4 902 277 , 5 000 733 , 5 131 823 EUROPEAN PATENTS 0 306 445, 0 448 909 - JAPANESE PATENT 2 107 259, 2 892 852 - Other patents pending
REPLACE FUSES AS MARKED
Pressure Cycle
Run
FUTURE MEDICAL SYSTEMS, Inc. 504 McCormick Drive GLEN BURNIE, MD 21061 USA
FOOT PEDAL DO NOT REMOVE CONNECTOR WITHOUT
CAUTION : HAVING TURNED OFF THE DEVICE.
® REGISTERED TRADEMARK of FUTURE MEDICAL SYSTEM SA
5
a: Insert spikes into irrigation bags. b: Open two (2) clamps on irrigation tubes. c: Press RUN STOP button. Prime pump to fifty (50). Advanced Irrigation Pump
d: Press FILL CHAMBER button to pump fluid into the chamber. Repeat until fluid rises to indicator window (1/3 full). e: Twist cap off irrigation tube.
Advanced Irrigation Pump
®
®
ALARM Fill Chamber
PRESSURE
RUN/STOP
Pressure Cycle
Remote Control
ALARM Fill Chamber
pressure
Run
RUN/STOP
Stop
Run Stop
c
a
d b
e
B. Connecting the Intermediary Irrigation Tube (without One-way Valve)
1
grounds]
a: Remove the intermediary irrigation tube without one-way valve from the package and close the white clamp.
a
b
b: Twist blue cap off the intermediary irrigation tube.
INFLOW
Advanced Irrigation Pump
®
ALARM Fill Chamber
RUN/STOP Run
PRESSURE
Pressure Cycle
Remote Control
pressure
Stop
2
a: Connect the irrigation tube to the intermediary irrigation tube without one-way valve by screwing the two blue connector ends together until snug. b: Open both clamps until fluid exits the tube. Close the clamp nearest the end of the tube after fluid is released and place in the sterile field.
INFLOW
b
3
a: Connect the tube marked INFLOW to the arthroscopic scope sheath.
INFLOW
a
a
PRESSURE
Pressure Cycle pressure
Remote Control
Remote Control