HemoSphere Advanced Monitoring Setup Guide v 1.0

HemoSphere platform

Back of the monitor 1. Main power cord connection 2. HDMI port 3. Ethernet port 4. USB port 2 5. COM1 serial port connector (RS-232) 3 6. Analog input 1 4 7. Analog input 2 5 8. ECG input 9. Pressure output 10. Equipotential terminal stud Monitor right panel 1. USB port 2. Battery door 1

2

HemoSphere advanced monitor screen features 6 7 8 9

Start/stop monitoring

10

Monitor screen selection

1

Clinical actions Monitor left panel 1. L -Tech expansion 1 module slot 2. Expansion module 2 slots (2) 3. Smart cable 2 ports (2) 3

Settings

Snapshot

3

HemoSphere advanced monitor screen features Navigation bar (section 5.2)

Parameter globe (section 5.3.1)

Information bar (section 5.5)

Start CO monitoring Stop CO monitoring Choose between six visual clinical support screens, the selected screen will appear in the main window • Oximetry calibration • iCO • Patient CCO cable test • Event review • Derived value calculator • Patient data • Monitor settings • Advanced setup • Export data • Demo mode • Engineering • Help Captures an image of the screen at the current time

Silence audible alarm

This icon silences all alarms for two minutes

Parameter globes

1. T  o change a displayed parameter, touch outside the globe you want to change. 2. T he selected parameter appears highlighted. The other parameters being displayed are outlined. Available parameters appear without highlights. 3. Touch the parameter you want to replace the current parameter.

HemoSphere advanced monitor information bar Status Bar (section 5.6) Main window

Wi-Fi HIS Time Date Battery Monitoring Averaged Blood Lock status status mode heart rate temperature screen

HemoSphere platform

Back of the monitor 1. Main power cord connection 2. HDMI port 3. Ethernet port 4. USB port 2 5. COM1 serial port connector (RS-232) 3 6. Analog input 1 4 7. Analog input 2 5 8. ECG input 9. Pressure output 10. Equipotential terminal stud Monitor right panel 1. USB port 2. Battery door 1

2

HemoSphere advanced monitor screen features 6 7 8 9

Start/stop monitoring

10

Monitor screen selection

1

Clinical actions Monitor left panel 1. L -Tech expansion 1 module slot 2. Expansion module 2 slots (2) 3. Smart cable 2 ports (2) 3

Settings

Snapshot

3

HemoSphere advanced monitor screen features Navigation bar (section 5.2)

Parameter globe (section 5.3.1)

Information bar (section 5.5)

Start CO monitoring Stop CO monitoring Choose between six visual clinical support screens, the selected screen will appear in the main window • Oximetry calibration • iCO • Patient CCO cable test • Event review • Derived value calculator • Patient data • Monitor settings • Advanced setup • Export data • Demo mode • Engineering • Help Captures an image of the screen at the current time

Silence audible alarm

This icon silences all alarms for two minutes

Parameter globes

1. T  o change a displayed parameter, touch outside the globe you want to change. 2. T he selected parameter appears highlighted. The other parameters being displayed are outlined. Available parameters appear without highlights. 3. Touch the parameter you want to replace the current parameter.

HemoSphere advanced monitor information bar Status Bar (section 5.6) Main window

Wi-Fi HIS Time Date Battery Monitoring Averaged Blood Lock status status mode heart rate temperature screen

HemoSphere Advanced Monitoring Platform

HemoSphere Swan-Ganz module setup 3 2

6

4

1. Compatible Swan-Ganz catheter 2. Thermal filament connection 3. Thermistor connection

Setup guide 7 4. I njectate temperature probe connection 5. Patient CCO cable 6. HemoSphere Swan-Ganz module 7. H  emoSphere advanced monitor

HemoSphere Swan-Ganz module setup 1. I nsert the HemoSphere Swan‑Ganz module into a standard module slot on the left panel of the HemoSphere advanced monitor. The module will click in place when properly engaged. 2. Turn on monitor power switch and follow steps for entering patient data. 3. Plug the patient CCO cable into the module using the connection guide arrows for proper orientation. For CCO cable test, refer to ops manual. 4. C  onnect the compatible Swan‑Ganz catheter to the patient CCO cable. 5. R  efer to the HemoSphere advanced monitor operator’s manual for catheter connection guidelines and monitoring procedures. 24/7 technical support 800-822-9837 [email protected]

For professional use. CAUTION: Federal (United States) law restricts this device to sale by or on the order of a physician. See instructions for use for full prescribing information, including indications, contraindications, warnings, precautions and adverse events. Edwards Lifesciences devices placed on the European market meeting the essential requirements referred to in Article 3 of the Medical Device directive 93/42/EEC bear the CE marking of conformity. Edwards, Edwards Lifesciences, the stylized E logo, HemoSphere, Swan, and Swan-Ganz are trademarks of Edwards Lifesciences Corporation. All other trademarks are the property of their respective owners. © 2017 Edwards Lifesciences Corporation. All rights reserved. PP--US-2208 v1.0 Edwards Lifesciences One Edwards Way, Irvine CA 92614 USA edwards.com

HemoSphere advanced monitor setup

HemoSphere platform

1

5

5

1. S  ecurely position the HemoSphere advanced monitor or mount on a compatible stand.

1

2. Open the battery door on the lower right panel of the HemoSphere advanced monitor and insert the battery. 3. Connect the power cord to the rear panel of the monitor and plug into a hospital grade outlet. Note: after inserting the battery for the first time, the battery must be fully charged and conditioned. Refer to operator’s manual for additional information. 4. Insert desired hemodynamic technology module and/or cable. Refer to module or cable instructions for proper insertion/connection procedures.

2

5. Press power button on the front of the monitor. Note: upon initial startup the display language can be selected which affects the time/date format and units of measurement. 6. Follow instructions contained in the HemoSphere advanced monitoring platform operator’s manual for desired hemodynamic technology module or cable monitoring.

4 3