Quick Guide
71 Pages
Preview
Page 1
GE Healthcare
Technical Publications
Direction 5314624-100 Rev. 6
LOGIQ e Quick Guide
Copyright 2008-2010 By General Electric Co. Operating Documentation
Regulatory Requirement LOGIQ e complies with regulatory requirements of the following European Directive 93/42/EEC concerning medical devices.
Manufacturer
Factory Site
GE Medical Systems (China) Co., Ltd.
GE Medical Systems (China) Co., Ltd.
No. 19, Changjiang Road
No. 19 Changjiang Road
WuXi National Hi-Tech Development Zone
Wuxi National Hi-Tech Development Zone
Jiangsu, P.R. China 214028
Jiangsu, P.R.China 214028
TEL: +86 510 85225888; FAX: +86 510 85226688
TEL: +86 510 85225888; FAX: +86 510 85226688 GE Medical Systems Ultrasound & Primary Care Diagnostics, LLC DBA GE Healthcare 9900 Innovation Drive Wauwatosa, WI53226 U.S.A. TEL: (1) 800-437-1171; FAX: (1) 414-721-3865
GE Healthcare GE Medical System: Telex 3797371 P. O. Box 414, Milwaukee, Wisconsin 53201 U.S.A. (Asia, Pacific, Latin America, North America) GE Ultraschall:Tel: +33 (0) 130 831 300 Deutschland GmbH & Co KG Beethovenstrabe 239, Postfach 11 05 60 D-42655 Solingen, Germany
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
A
Revision History REV
DATE
REASON FOR CHANGE
1
Aug. 14th, 2008
Initial Release
2
Sep. 19th, 2008
Update for Touch Screen
3
Apr. 21st, 2009
Add two applications Intraoperative and Thoracic/ Pleural
4
Jun. 04th,2009
5
Apr. 21st, 2010
6
Nov. 05th, 2010
Add a note to inform the 16L-RS is notavaliable for China and update the Chinese Rating Plate Add new probes and Software update Add Factory Site and update Rating Plate
List of Effective Page PAGE NUMBER Title A and B 1-66
REVISION HISTORY Rev. 6 Rev. 6 Rev. 6
Please verify that you are using the latest revision of this document. Information pertaining to this document is maintained on MyWorkshop/ ePDM (GE Healthcare electronic Product Data Management). If you need to know the latest revision, contact your distributor, local GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer Center at 1-800-682-5327 or 262-524-5698.
LOGIQ e Quick Guide
CAUTION
Direction 5314624-100 Rev. 6
FOR USA ONLY “United Sates law restricts this device to sale or use by or on the order of a physician” if sold in the United States.
B
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
1
Installation Guide 2 d
1
5
3 7 4
6 7
b c
9 8
a
10 910
5
LOGIQ e Checklist
6. Acoustic Gel
a. Reusable LOGIQ e packaging b. Interleaver
2. AC Adapter
7. Software DVD (System and Application Software DVD)
3. Quick Guide or User Guide
8. Basic color software certificate
d. Paper Pad
4. Manual CD
9. DVD-RW
5. Battery
10. Foot Switch (Option)
1. LOGIQ e System, Console and interleavers
c.
Accessories Package
NOTE: The probe(s) storage case is in the separate box from the LOGIQ e’s packaging. NOTE: For DVD-RW, the LOGIQ e supports CD-R/ DVD-R; CD-RW/DVD-RW IS NOT currently supported.
Installation
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
2
Installation Guide (continued) 1
2 6
7
3 5
9 4
Figure 1.
Step 1
Step 1, Unpack the system. Take out the system and accessories boxes.
1. AC Adapter
Figure 2.
8
Step 2
Step 2, Unpack the accessories box. Set aside the following items, which you will need to complete the setup of your LOGIQ e system: 5. Acoustic Gel
2. Quick Guide or User Guide
6. Software DVD (System and Application Software DVD)
3. Manual CD
7. Basic color software certificate
4. Battery
8. DVD-RW 9. Foot Switch (Option)
NOTE: Please unpack the system carefully. DO NOT dispose of the LOGIQ e packaging container so that it can be reused for service purposes.
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
Installation Guide (continued)
Figure 3.
Step 3
Step 3, Install the battery with the label side upward. NOTE: The battery may be partially discharged. CAUTION
Upon receipt of the LOGIQ e and before 1st time use, it is highly recommended that the customer performs 1 full discharge / charge cycle. If the battery has not been used for > 2 months, the customers are recommended to perform 1 full discharge / charge cycle. Battery is also recommended to be stored in a shady and cool area with FCC (Full Current Capacity). One Full Discharge/Charge Cycle Process: 1. Full discharge of battery to let the LOGIQ e automatically shut down. 2. Charge LOGIQ e to 100% FCC (Full Current Capacity). 3. Discharge of LOGIQ e for complete shut down (takes 1hr for discharge). Whole process (Step1-3) will be completed around in 5 hours.
Installation
3
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
4
Installation Guide (continued)
DVD-RW drive
AC adapter
UP
Figure 4.
Step 4, Rotate the handle downward to the bottom NOTE: Keep the handle downward to the bottom, when the AC adapter power cord is connected with an electrical outlet.
Step 4 and step 5
Step 5, Plug the AC adapter output connector into the system DC input port (located on the system’s rear panel) with the arrow side upward. Plug the AC adapter power cord into a grounded, protective earth outlet.
NOTE: Connect the DVD-RW drive to the Serial port for Backup and Restore, Tutorials, and for loading software, but do not use DVD-RW when scanning.
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
5
Installation Guide (continued)
probe latch
Figure 5.
Step 6
Step 6, Carefully open the system LCD display, plug the probe connector into the probe port, then lock the probe latch upward. NOTE: Please ensure that the probe latch is in an unlocked position before you connect the probe to the system.
Installation
NOTE: To avoid damage, DO NOT push the LCD too much when the viewing angle is at its maximum angle (160 degrees).
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
Installation Guide (continued)
Figure 6.
Step 7
Step 7, To turn on the system, press the power button.
6
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
LOGIQ e Control Panel Tour 1. TGC. Move slide pots left/right to adjust TGC. 2. New Patient. Press to activate these controls. 3. Additional Feature Keys: Steer, Harmonics, PDI. 4. Mode/Gain/Auto Keys: M Mode, Pulsed Wave Doppler (PW) Modes, Color Flow (CF) Mode and B Mode. Press these key to activate the mode; rotate the key to adjust the Gain; Press Auto to activate/deactivate auto optimization. 5. Imaging/Measurement Key: Cursor, Clear, Body Mark Measure, M/D Cursor, Scan Area, Set / B. Press these keys, as necessary. 6. Depth/Zoom/Ellipse. Adjust these keys, as necessary. 7. Start/Stop. 8. Print Keys: Press the P1, P2, P3 keys to archive, print, or send the image. 9. Freeze. Press Freeze to freeze the image or return to scanning. 10. Keyboard. Use the keyboard to enter patient information and annotations. Press F1, F2, F3, F4, F5 and F12 keys to activate Online help/ User Manual, Arrow, Eject, Spooler, Reverse and Touch Panel Mode On/Off functions. The User can define functions for the F6-F11 keys. The following functions are available for F6-F11 Keys: CWD, 3D, LOGIQ View, CrossXBeam, ECG On/Off, Set Home, Text Overlay WorkSheet, Grab Last, Word Delete and Video.DVR, TDI and protocol (Worksheet is only available for F6; TDI and protocol is only available for F7-F11). Press [Utility] to enter the Utility function and configure the system. Press [Preset] to preset the system. Press [Report] to Enter the report page.
Control Panel Tour
7
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
8
LOGIQ e Keys SoftMenu Key Tour
Function Keys - Programmable Keys
Shortcut keys
In general, there are two types of softMenu keys: Paddle Switch and adjustable knobs.
•
F1 = Help (Enter Online Help / User Manual)
•
Ctrl + Alt + R: Restart the system
•
F2 = Arrow (Annotation Arrow)
•
Ctrl + E: Eject
1. The Paddle Switch is used to access and adjust the Sub SoftMenu.
•
F3 = Eject (Eject media)
•
F4 = Spooler (Activates DICOM Job Spooler screen)
How to Program your hot keys
•
F5 = Reverse
•
F6 -F11 Programmable
<Utility> - <Admin> - <Function Key>, <Hot Key> then use the drop down menu.
•
F12 = Touch Panel Mode On/Off
2. Press the adjustable knobs to toggle option menu between line one and line two. 3. Rotate the adjustable knobs to adjust the corresponding parameters.
Choices for hot keys
How to Program your programmable
•
No function
keys
•
Biopsy Guide
•
Save as
<Utility> - <Admin> - <Function Key>, <Key Configuration> then use the drop down menu.
•
Active Image
Choices for program Keys
•
Measurement Select
•
Auto Doppler Calculation
•
Auto Trace
•
CWD
•
DVD Format
•
3D
•
Range Focus
•
LOGIQ View
•
OB Graph
•
CrossXBeam
•
Measurement All Clear
•
ECG On/Off
•
ATO
•
Set Home
•
Auto TGC
•
Text Overlay
•
Print4
•
Grab Last
•
Print5
•
Word Delete
•
Video.DVR
•
TDI
•
protocol
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
9
LOGIQ e Monitor Display Tour 1. Institution/Hospital Name, Date, Time, Operator Identification, system status (real-time of frozen). 2. Patient Name, Patient Identification. 3. Acoustic Output Readout. 4. GE Symbol: Probe Orientation Marker. Coincides with the probe orientation marking on the probe. 5. Image Preview. 6. Gray/Color Bar.
7. Cine Gauge.
16. Body Pattern.
8. Measurement Summary Window.
17. Depth Scale.
9. Image.
18. Soft Menu.
10. Measurement (not shown).
19. Caps Lock: On or Off.
11. Results Window.
20. Start Menu Icon.
12. Probe Identifier. Exam Study.
21. Battery icon.
13. Imaging Parameters by Mode (current mode highlighted).
22. Card icon.
14. Focal Zone. 15. TGC (not shown on the image).
Control Panel Tour
23. Trackball Functionality Status: Scroll, M&A (Measurement and Analysis), Position, Size, Scan Area Width and Tilt.
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
10
System Power Power On To connect the system to the electrical supply: 1. Ensure that the wall outlet is of the appropriate type. 2. Ensure that the protective earth (ground) connection is reliable. ACDC Type
Specification
ACDC Type
Specification
220-240VAC 500VA (China)
220-240VAC 500VA (Switzerland)
220-240VAC 500VA (India)
220-240VAC 500VA (U.K.)
220-240VAC 500VA (Argentina)
100-120 VAC 500VA (USA)
220-240 VAC 500VA (Europe)
220-240 VAC 500VA (Israel)
100-120 VAC 500VA (Japan)
220-240 VAC 500VA (Australia)
3. Unwrap the power cable. Make sure to allow sufficient slack in the cable so that the plug is not pulled out of the wall if the system is moved slightly.
LEDs
Use caution to ensure that the power cable does not disconnect during system use. If the system is accidentally unplugged, data may be lost. Press the Power On/Off switch to turn the power on.
Figure 9.
LED indicators
1. Indicates hard disk working status. When the LED is flashing, the system is writing or reading from the hard disk. Color: Green.
a
2. Indicates power status. After pressing the Power On/Off switch, the system power is on and this LED is lit. Color: Green. 3. Indicates battery status. When the battery is charged, the LED is green. When battery power is low, the LED is orange. Colors: Green and orange. 4. The fourth LED does not work on LOGIQ e.
Table 1: Example Plug and Outlet Configurations Figure 8.
Power On/Off Switch Location
a. Power Switch Location
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
Power Off
Full Maintenance Reboot
To power down the system:
You can select Full Maintenance Reboot to fully restart the system. It is used when installing new software or you feel the system response is getting slower.
1. Press the Power On/Off switch at the front of the system once. 2. The System-Exit window is displayed.
1. Press the Power On/Off switch at the front of the system once. Using the Trackball and Select key, select Full Maintenance Reboot. 2. The reminder window is displayed.
3. Using the Trackball or Select key, select Shutdown. The shutdown process takes a few seconds and is complete when the power status LED (For LED status, refer to Table Figure 9. on page 10) is turned off. 4. Disconnect the probes. Clean or disinfect all probes as necessary. Store them in their shipping cases to avoid damage.
3. Click OK to continue the process. The full maintenance reboot process takes about 2 minutes and is completed when the application is restarted. NOTE: For the purpose of performance improvement, system may require you to perform an auto full maintenance reboot even you are selecting Shutdown. The reminder window will be displayed:
5. Close LCD cover.
Prepare Exam
11 Click OK to continue the process. The auto full maintenance reboot process takes about 2 minutes, and is completed when the system is shut down automatically.
Starting an Exam You need to select a pre-configured dataflow that sets up the ultrasound system to work according to the services associated to the dataflow. 1. Select your Operator Login and type in your Password:
2. Press OK. 3. Fill in the New Patient menu as described on page 1-12. OR, If the patient name is on the patient record list, Trackball to the patient’s name to highlight the name, (or perform a search to locate the patient).
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
12
Starting an Exam New Patient
Patient Entry Menu
To start a new patient’s exam,
Image Management Window [1]
EZBackup, EZMove [3]
1. Press Patient. Press the New Patient button on the Patient menu.
Access to this patient’s exam history and image management features.
One-step method to backup/move (move and delete patient images) to an external media.
2. Select the Exam Category.
Function Selection Window [2]
Dataflow [4]
New Patient is used to clear the patient entry screen to input a new patient’s data into the database. Register is used to enter new patient information into the database prior to the actual exam being performed. Details displays exam details and additional patient information.
Selects this exam’s dataflow preference.
3. Type the Patient ID, Patient Name, Birthdate, etc. 4. Press the Register button on the Patient menu (DO NOT press Register if you are automatically generating a patient ID). 5. Press B, Esc, or Exit.
Exit [5] Exits the Patient Menu and returns to scanning. Patient Information [6] Patient ID, Other ID, Name, Birthdate, Age and Sex. Category Selection and Exam Information [7&8] Select the appropriate category and enter the exam information. Patient View and Exam View [9] Patient View lists the patients in the database. “Search key” enables searching list by Patient ID, Other ID, Last Name, First Name, Birthdate, Sex, Exam today, Exam between, Exam date before, Examdate, Examdate after, Accession Number and Exam Description. “string” field helps define the search parameters, and “Clear“ clears the searching condition. Exam View lists the exams of the selected patient. Select the patient or the exam in Patient View and press “Exam View”. NOTE: The Other ID function is only available on LOGIQ e R6.x.x.
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
13
B/M Mode Image Optimize
B Mode Control Panel Controls
Power Output
Frame Average
Auto Optimize
Optimizes image quality and allows user to reduce beam intensity. 2% increments between 0-100%.
Temporal filter that averages frames together. This has the effect of presenting a smoother, softer image.
Automatic Tissue Optimization optimizes the image based upon a specified Region of Interest (ROI) or anatomy within the display.
Dynamic Range
Colorize
Zoom
Dynamic Range controls how echo intensities are converted to shades of gray, thereby increasing the adjustable range of contrast.
Enables gray scale image colorization. To deactivate, reselect a Gray Map.
Focus Number and Position
Gray Map
Increases the number of transmit focal zones or moves the focal zone(s) so that you can tighten up the beam for a specific area. A graphic caret corresponding to the focal zone position(s) appears on the right edge of the image.
Determines how the echo intensity levels received are presented as shades of gray.
Magnifies a zoom region of interest, which is magnified to approximately the size of a full-sized image. An un-zoomed reference image is displayed adjacent to the zoom window. The system adjusts all imaging parameters accordingly. Press Depth/ Zoom/Ellipse key to activate Zoom. Adjust the key to increase or decrease the zoom size. Use the Trackball to position the Zoom ROI. Only when the zoom size reaches the max or press the Depth/ Zoom/Ellipse key again would deactivate the Zoom, and activate Depth.
NOTE: Push key to toggle between Focus Number and Focus Position. NOTE: Not available when Auto frequency/Auto depth active.
Rotation (Up/Down) Rotates the image by selecting the value from the Softkey.
Reverse
Frequency
Rejection
Multi Frequency mode lets you downshift to the probe's next lower frequency or shift up to a higher frequency.
Selects a level below which echoes will not be amplified (an echo must have a certain minimum amplitude before it will be processed).
Line density
Edge Enhance Edge Enhance brings out subtle tissue differences and boundaries by enhancing the gray scale differences corresponding to the edges of structures. Adjustments to M Mode's edge enhancement affects the M Mode only.
Flips the image left/right.
Range Focus Improves the near/mid field image quality, borders/ interfaces, increases contrast and detail resolution across the image, and allows for less filling in the vessels.
Optimizes B Mode frame rate or spatial resolution for the best possible image.
SRI HD (LOGIQ e R6.x.x Only)
Sweep Speed Changes the speed at which the time line is swept. The following speed values are available, 1, 2, 3, 4, 6, 8, 12, 16.
SRI HD (High Definition Speckle Reduction Imaging) is an adaptive algorithm to reduce the unwanted effects of speckle in the ultrasound image.
B/M Mode Image Optimize
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
14
B/M Mode Image Optimize (continued) B/M Mode Scanning Hints Auto Optimize. Improves imaging performance while reducing optimization time. Frequency. Changes system parameters to best optimize for a particular patient type.
Maps. There is an inter-dependency between gray maps, gain, and dynamic range. If you change a map, revisit gain and dynamic range settings. Dynamic Range. Affects the amount of gray scale information displayed. If you increase the gain, you may want to decrease the dynamic range.
B-Mode Top/Sub Menu Controls
Edge Enhance. Better delineates the amount of border crispness. Frame Average. Smooths the image by averaging frames. Affects the amount of speckle reduction. CrossXBeam. Combines three or more frames from different steering angles into a single frame.
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
15
ED (Emergency Department) Refer to Basic User Manual for more information.
B/M Mode Image Optimize
LOGIQ e Quick Guide
Direction 5314624-100 Rev. 6
Nerve Block Refer to Basic User Manual for more information.
B/M Mode Image Optimize
16