GH1 F Ceiling Hoist Quick Guide

Quick Guide – GH1 F • The ceiling hoist is switched on by pressing one of the buttons on the hand control. • If the hoist does not switch on, this may be because the emergency stop button has been activated. • Attach the travelling trolley anchor with cord to the locking mechanism at the top of the hoist. Using the switch at the top of the hand control unit, select the hoist installation function. Start installation by pressing the “up” button . Move the switch at the top of the hand control to the position to complete the installation. The hoist can now be used for relocating. • For deinstallation of the hoist, choose the function and press on the “down” button . Wait until the cord is fully extended

before pressing the locking mechanism to release the hoist anchor. • The hoist can be recharged by inserting the power supply plug into the charge point of the hand control unit and switching on the power supply. The plug should always be inserted into the hand control when the hoist is not in use. • The hoist’s maximum lifting capacity will be marked on the hoist, e.g., 255 kg/560 lbs. Note that the rail system or the sling may have a lower lifting capacity. The lowest lifting capacity may not be exceeded. • If you have any questions regarding instructions and training, ask your environmental health & safety coordinator, human resources manager or your line manager.