Short Instructions for Disinfection of Measuring Prisms Edition 6 April 2018

Short instructions for disinfection of measuring prisms Cleaning

FORBIDDEN! Never use damaged measuring prisms.

60''

≤60'

600 ml

6. Add at least 600 ml of disinfectant solution to the Desinset measuring beaker, so that the lower tray is completely immersed. 7. Maximum material-compatible exposure time: 60 minutes. 8. Once the exposure time has expired, remove the plastic insert, allow it to drip dry and then place it in the other clean and disinfected measuring beaker. NOTE! The disinfectant must be replaced as follows: ÎÎ When visibly soiled ÎÎ Once a day or as specified by the manufacturer •• List of Disinfectants: www.haag-streit.com •• HAAG-STREIT recommends Desinset

Rinse the cleaned measuring prisms under running water (guide time 60 seconds). ÎÎ Dry with a lint-free disposable cloth. ÎÎ Perform a visual inspection for cleanliness and integrity. 4. Place the cleaned measuring prisms in the Desinset plastic tray. ÎÎ

10'–15'

5. Take the measuring prisms out of the plastic tray and place them on the lower tray of a clean, disinfected Desinset plastic insert. ÎÎ Measuring prisms must not overlap.

Drying / storing

1. Remove measuring prism from the holder. 2. Rinse the measuring prisms under running water (guide time 60 seconds). 3. Clean the measuring prisms with a pH-neutral cleansing agent until no more soiling is visible.

Disinfection / rinsing

Excerpt from HAAG-STREIT instruction for use ‘cleaning and disinfection’. Complete instructions for use: www. haag-streit.com

English

9. Place the clean and disinfected funnel on the plastic insert. ÎÎ Rinse the contents under running water for a minimum of 10 minutes and a maximum of 15 minutes.

10. Remove the plastic insert with the measuring prisms. 11. Dry the measuring prisms individually with a clean and sterile, soft, disposable cloth. 12. Store the measuring prisms in a closed Desinset glass container.

FORBIDDEN! •• Disinfection with alcohol •• Cleaning with acetone •• Disinfection using UV radiation •• Sterilization using steam or ethylene oxide •• Temperatures above 60°C

© HAAG-STREIT AG, 3098 Koeniz, Switzerland - Doc. No. 1500.7220315.04060 – 6. Edition – 2018 – 04

01-IFU_HowToDisinfect-7220315-04060_eng.indd 1

31.05.2018 13:38:22