Hill-Rom
Hill-Rom Centrella Smart + Beds
Centrella Smart + Bed Model CNT355 Skills Checklist Rev 2 Sept 2017
Skills Checklist
2 Pages
Preview
Page 1
Centrella™ Smart+ Bed Model CNT355 Skills Checklist Staff Signature:_____________________________________ Trainer’s Signature:__________________________________ Date:_____________________________________________
Perform the following. Frame Features 1.
State the maximum patient weight limit.
2.
Unplug bed’s power cord. Identify the one (1) audible and two (2) visual cues when the bed is unplugged from power.
3.
Demonstrate use of battery backup to raise head. Identify controls available on battery backup. Identify % battery ‘charged’ indicator for bed frame.
4.
Lock head control and unlock retractable foot feature and shorten the bed to shortest position. State all controls that can be locked out.
5.
Explain how bed indicates the communication cable/call light is not connected. There are two (2) audible and two (2) visual indicators.
6.
Lower the head and intermediate siderails on one side of the bed. Raise into a locked position.
7.
Identify one (1) audible and two (2) visual cues that the bed is in the lowest position.
8.
Elevate the lower legs/foot-of-bed so it is parallel to the floor. Explain when this may be useful. Slightly lower feet and then level the legs.
9.
Using CPR control, position bed for CPR. Explain what happens to the mattress.
10. Remove headboard for emergency access to the head of the bed. 11. Identify two (2) head-of-bed indicators on the bed. 12. Identify the built-in siderail line managers. 13. Identify the hip indicator label for patient placement in the bed. Explain why this is important. 14. Point to the three (3) areas for attaching restraints on one side of the bed. 15. Identify the foley/drainage bag holder on one side of the bed. 16. Explain the foley position limit. Demonstrate how to turn it on and how to recognize it is active. 17. Explain the difference between when the bed sounds a single beep and a triple beep. 18. Locate the Boost® control. Explain why to use it and what happens when Boost is activated. 19. Explain what the three (3) lighted SafeView®+ icons indicate (at the foot-end of the bed and on the floor). Why are there blinking lights? Correct the situation to stop the lights from blinking. 20. Explain purpose of lighted siderail grip. What turns it on? Explain meaning when light is blue? Amber? Flashing Amber? 21. Locate and explain purpose of the night light. What activates the brightening of the night light? 22. Locate these patient accessible siderail features: USB charge port, siderail storage for devices, urinal holder, and head-of-bed angle indicator
COMPLETED
Centrella™ Smart+ Bed Model CNT355 Skills Checklist Perform the following. 23. Explain the patient remote controls: nurse call, bed exit ‘on’ reminder, stand assist, comfort adjust (mattress) controls. Hang patient remote on all three (3) siderail locations. 24. Demonstrate using the IntelliDrive® Powered Transport (optional) system by moving the bed forward and backward. Demonstrate how to move bed side-to-side as if to straighten in a room or up against a stretcher. State % of battery charge. 25. Identify the three (3) indicators for “brake not set” when bed is plugged into power.
GCI® Touchscreen 26. Define the three-levels of bed exit sensitivity. 27. Set the bed exit sensitivity to alert before a patient gets out of the bed. State the four (4) ways you know bed exit is ON (patient in bed). 28. Pre-emptively SILENCE the bed exit alert. Explain how to add time for Silence period and meaning of triple beep. 29. Resume the bed exit alert. Identify two (2) ways to do this. 30. Explain the difference between the scale “new patient zero” and “same patient re-zero.” 31. Zero scale for “new patient.” Identify three (3) screens you can check to see if the scale was zeroed. 32. Weigh patient. Demonstrate how to display weight in lbs, then save weight in kgs. Recall weight after saving. 33. Set the <30° head-of-bed limit. Turn off function. 34. Locate the stand assist control on the GCI® Touchscreen. 35. Demonstrate putting the bed into the chair position. Explain meaning of triple beep. 36. Level the bed from the chair position using the bed flat control. 37. Locate the settings screen. Turn OFF the SafeView® alert lights. 38. Turn off the “Function Not Available” voice alert. What Voice Alert cannot be turned off? 39. Locate on the help screens and service wrench on the GCI® Touchscreen.
Centrella™ MAX Surface Features 40. Discuss the appropriate patient use for this product. 41. Discuss how Focused Advanced Microclimate® Technology works. 42. Discuss how weight-based pressure redistribution works. 43. Discuss automatic surface adjustments to help provide support and stability for side sitting and to prevent bottoming out. 44. Discuss how the surface adjusts with the frame articulation to help prevent the patient from bottoming out. 45. Discuss the quiet operation and minimized surface movement to help improve patient experience. 46. Discuss how the sloped heel section can help off load pressure in the vulnerable heel area. 47. Use Turn Assist to turn a patient to the RIGHT side. Demonstrate how you stop a turn mid-turn.
Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warrantyextended on the sale or rental of its products. ©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. 203224 rev 2 18-SEP-2017 ENG – US
www.hill-rom.com
COMPLETED