Hill-Rom

Hill-Rom Centrella Smart + Beds

Centrella Smart + Bed Tips Poster Rev 1 Oct 2019

Poster

1 Page

CENTRELLA SMART+ BED TIPS ® GRAPHICAL CAREGIVER INTERFACE (GCI)® TOUCHSCREEN .. .. .. Weighing the Patient: Select the Scale button on the Navigation Menu on the GCI touchscreen. Select Weigh and follow the on screen instructions then select Continue. Select Save to save the patient’s weight. You will hear a single beep confirming the weight has been saved. A B C D 0 E F G H I Last Weight: 147.5 kg 06/03/2015 6:35 AM J K Last Zero : 10/26/2015 8:04 AM Weigh Weigh Zero Controls A B C D E F G H I J K Scale Air Mattress Controls* Bed Exit Alarm Home Button <30° Head-of-Bed Angle Limit Stand Assist Dining Chair® Function Bed Flat Position FlexAfoot™ Feature Heart Rate/Respiratory Rate Monitoring* Settings/Preferences STAND ASSIST .. .. .. To Activate Stand Assist: Select the Stand Assist icon on the home screen of the GCI touchscreen. Select and hold the Stand Assist control until the legs are flat and the head is at the desired angle. One-button simultaneously levels legs to a flat positions and raises the head-of-bed to position the patient safely. .. Note: If equipped with a Centrella® max powered air surface, the seat section of the bed will automatically inflate to provide more support for the patient. CENTRELLA BED EXIT ALERT SYSTEM .. Pro Tip: .. .. .. .. .. .. Three sensitivity settings: Changes Position Moves Towards the Edge Has Left the Bed To turn on the bed exit alert: Select the Bell icon in the Navigation Menu of the GCI touchscreen. Select the appropriate setting for your patient. Listen for a single beep and look for the Bed Exit On icon indicating the system is armed. Silence the Bed Exit Alert System without deactivating the system. Select the silence button on the GCI or yellow silence button on siderail. The alarm will re-arm automatically, once patient is back in bed. .. .. .. Single Beep: Activity was performed successfully (i.e., when the bed reaches the lowest position). Triple Beep: Attention is needed; look at the message on the GCI Touchscreen for more information (i.e., when you attempt to use control that is locked-out). .. .. .. To Adjust Siderail Protocol: Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control. Select Rail Protocol and configure rail protocol followed by your facility and select Accept. The siderail protocol is reset to facility default when when the bed is zeroed for New Patient. .. Note: The siderail protocol is based on your facility’s policy. Current Patient Siderail Protocol Head Rails .. .. To Turn the Foley Position Limit On and Off: .. <30˚ Limit Settings/Preferences Stand Assist Bed Features Bed Info Brightness Bed Service Foley Limit Service Connect Brightness Siderail Lights SCALE OPERATIONS .. .. Zeroing the Scale: Select the Scale icon on the Navigation Menu of the GCI touchscreen. Select Zero. Select “New Patient” or “Re-Zero” for same patient. .. .. .. Re-Zero: .. .. New Patient Zero: Clears previous patient weight history Zeros the scale Resets bed to facility’s default settings Foley Position Limit Off On Reduces the likelihood of drainage bags touching the ground by limiting foot down and Reverse Trendelenburg. Cancel Keeps patient weight history and bed settings customized for that patient. Zeros the scale Accept Down Up Up 1 Rail The Foley Position Bag Holders can be found at the foot-end of each side of the bed. Note: 2 Rails Foot Rails 2 Rails Alert for Restraint 1 Rail Down .. .. To Activate IntelliDrive® Powered Transport: Unplug the power cord and set the brake pedal to Steer (green pedal down). As the drive wheel lowers, the indicator on the Transport Pod flashes green. When the wheel has lowered completely, the indicator turns solid green and a single beep will sound. Select down on one of the black enable switches on the underside of the blue push handles. Apply pressure to the handles to move the bed either forward or backward. .. SIDERAIL PROTOCOL STATUS .. Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control. Select Off or ON, and Accept to lock in the new setting. INTELLIDRIVE® POWERED TRANSPORT* Two Types of Audible Alerts: FOLEY POSITION LIMIT A Foley Position Limit indicator will display on the screen, when activated. Head Angle 32˚ Teach your patients to use Stand Assist on their patient pendant*. Non-fall risk patients can use this on their own and fall-risk patients can use this proactively before you get bedside. *Patient pendants are an optional feature. AUDIBLE ALERTS Up Up Accept SAFEVIEW®+ SYSTEM .. .. Siderail Protocol: Green = Number of siderails up is equal to, or more than, set protocol Flashing Amber = Fewer siderails up than set protocol .. .. Bed Exit Status: .. .. .. .. Heart/Respiratory Rate Status*: .. .. .. To Deactivate IntelliDrive® Powered Transport: Set to Brake or Neutral, or plug the bed into power. AIR MATTRESS CONTROLS* .. .. .. Three Mattress Modes: Normal Mode: Provides continuous full-body pressure redistribution for patients. Max Inflate Mode: Maximizes firmness of the surface, for 15 minutes, to assist in patient handling and repositioning. Turn Assist: Helps the caregiver turn the patient to the left or right. This can be used for procedures such as patient positioning and linen changes. .. .. Navigate to Different Mattress Modes: Select the patient mattress icon. Select the most appropriate setting for your patient. .. Note: For proper operation, there must be a minimum of 32 kgs (70 lbs) on the surface. .. Pro Tip: Press and hold Adjust Bed Button to adjust the head-of-bed, knees and foot angle to the required position. Head Angle 32˚ <30˚ Limit Bed In Lowest Position Status: Green = In lowest position Flashing Amber = NOT in lowest position Green = Bed Exit is ON Flashing Amber = Bed Exit ALERTING Solid Amber = Bed Exit SILENCED Blue = Bed Exit is OFF Green = HR/RR monitoring is on and measurements are within the set thresholds Flashing Amber = HR/RR measurement is outside set thresholds .. .. WatchCare™ System Status*: Green = Ready to detect incontinence event Solid Amber = Incontinence event detected Stand Assist Air Mattress Controls Normal Max Inflate Right Turn Comfort Left Turn Not in Required Position Hold “Adjust Bed Button” or use side rail controls to: Level Bed Straighten Legs Lower Head To Home Screen Cancel Adjust Bed Button Continue *Optional Feature Learn more at hillrom.com. Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warrantyextended on the sale or rental of its products. © 2019 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. 211071 REV 1 16-OCT-2019 ENG – US FOR DETAILED WARNING AND CAUTION STATEMENTS, AND OPERATING INSTRUCTIONS, REFER TO THE CENTRELLA® BED USER MANUAL (193587).

File Type: PDF

File Size: 901 KB

File Name: Hill-Rom - 211071 - Centrella Smart + Bed Tips Poster Rev 1 Oct 2019 - 2019-10.pdf

Preview

Page 1

CENTRELLA SMART+ BED TIPS ®

GRAPHICAL CAREGIVER INTERFACE (GCI)® TOUCHSCREEN

.. .. ..

Weighing the Patient: Select the Scale button on the Navigation Menu on the GCI touchscreen. Select Weigh and follow the on screen instructions then select Continue. Select Save to save the patient’s weight. You will hear a single beep confirming the weight has been saved.

A B C D

0 E

G H

Last Weight: 147.5 kg 06/03/2015 6:35 AM

J K

Last Zero : 10/26/2015 8:04 AM

Weigh Weigh

Zero

Controls A B C D E F G H I J K

Scale Air Mattress Controls* Bed Exit Alarm Home Button <30° Head-of-Bed Angle Limit Stand Assist Dining Chair® Function Bed Flat Position FlexAfoot™ Feature Heart Rate/Respiratory Rate Monitoring* Settings/Preferences

STAND ASSIST

.. .. ..

To Activate Stand Assist: Select the Stand Assist icon on the home screen of the GCI touchscreen. Select and hold the Stand Assist control until the legs are flat and the head is at the desired angle. One-button simultaneously levels legs to a flat positions and raises the head-of-bed to position the patient safely.

Note: If equipped with a Centrella® max powered air surface, the seat section of the bed will automatically inflate to provide more support for the patient.

CENTRELLA BED EXIT ALERT SYSTEM

Pro Tip:

.. .. .. .. .. ..

Three sensitivity settings: Changes Position Moves Towards the Edge Has Left the Bed To turn on the bed exit alert: Select the Bell icon in the Navigation Menu of the GCI touchscreen. Select the appropriate setting for your patient. Listen for a single beep and look for the Bed Exit On icon indicating the system is armed. Silence the Bed Exit Alert System without deactivating the system. Select the silence button on the GCI or yellow silence button on siderail. The alarm will re-arm automatically, once patient is back in bed.

.. ..

Single Beep: Activity was performed successfully (i.e., when the bed reaches the lowest position). Triple Beep: Attention is needed; look at the message on the GCI Touchscreen for more information (i.e., when you attempt to use control that is locked-out).

.. .. ..

To Adjust Siderail Protocol: Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control. Select Rail Protocol and configure rail protocol followed by your facility and select Accept. The siderail protocol is reset to facility default when when the bed is zeroed for New Patient.

Note: The siderail protocol is based on your facility’s policy.

Current Patient Siderail Protocol Head Rails

.. ..

To Turn the Foley Position Limit On and Off:

<30˚ Limit

Settings/Preferences

Stand Assist

Bed Features

Bed Info

Brightness

Bed Service

Foley Limit

Service Connect

Brightness Siderail Lights

SCALE OPERATIONS

.. ..

Zeroing the Scale: Select the Scale icon on the Navigation Menu of the GCI touchscreen. Select Zero. Select “New Patient” or “Re-Zero” for same patient.

.. .. .. Re-Zero: .. ..

New Patient Zero: Clears previous patient weight history Zeros the scale Resets bed to facility’s default settings

Foley Position Limit Off

Reduces the likelihood of drainage bags touching the ground by limiting foot down and Reverse Trendelenburg. Cancel

Keeps patient weight history and bed settings customized for that patient. Zeros the scale

Down

Up Up

1 Rail

The Foley Position Bag Holders can be found at the foot-end of each side of the bed.

Note:

2 Rails

Foot Rails

2 Rails

Alert for Restraint

1 Rail

Down

.. ..

To Activate IntelliDrive® Powered Transport: Unplug the power cord and set the brake pedal to Steer (green pedal down). As the drive wheel lowers, the indicator on the Transport Pod flashes green. When the wheel has lowered completely, the indicator turns solid green and a single beep will sound. Select down on one of the black enable switches on the underside of the blue push handles. Apply pressure to the handles to move the bed either forward or backward.

SIDERAIL PROTOCOL STATUS

Select the Setting Menu control on the Navigation Menu of the home screen and select the Bed Features control. Select Off or ON, and Accept to lock in the new setting.

INTELLIDRIVE® POWERED TRANSPORT*

Two Types of Audible Alerts:

FOLEY POSITION LIMIT

A Foley Position Limit indicator will display on the screen, when activated.

Head Angle

32˚

Teach your patients to use Stand Assist on their patient pendant*. Non-fall risk patients can use this on their own and fall-risk patients can use this proactively before you get bedside. *Patient pendants are an optional feature.

AUDIBLE ALERTS

Up Up Accept

SAFEVIEW®+ SYSTEM

.. ..

Siderail Protocol: Green = Number of siderails up is equal to, or more than, set protocol Flashing Amber = Fewer siderails up than set protocol

.. .. Bed Exit Status: .. .. .. .. Heart/Respiratory Rate Status*: .. ..

To Deactivate IntelliDrive® Powered Transport: Set to Brake or Neutral, or plug the bed into power.

AIR MATTRESS CONTROLS*

.. .. ..

Three Mattress Modes: Normal Mode: Provides continuous full-body pressure redistribution for patients. Max Inflate Mode: Maximizes firmness of the surface, for 15 minutes, to assist in patient handling and repositioning. Turn Assist: Helps the caregiver turn the patient to the left or right. This can be used for procedures such as patient positioning and linen changes.

.. ..

Navigate to Different Mattress Modes: Select the patient mattress icon. Select the most appropriate setting for your patient.

Note: For proper operation, there must be a minimum of 32 kgs (70 lbs) on the surface.

Pro Tip: Press and hold Adjust Bed Button to adjust the head-of-bed, knees and foot angle to the required position.

Head Angle

32˚

<30˚ Limit

Bed In Lowest Position Status:

Green = In lowest position Flashing Amber = NOT in lowest position Green = Bed Exit is ON Flashing Amber = Bed Exit ALERTING Solid Amber = Bed Exit SILENCED Blue = Bed Exit is OFF Green = HR/RR monitoring is on and measurements are within the set thresholds Flashing Amber = HR/RR measurement is outside set thresholds

.. ..

WatchCare™ System Status*: Green = Ready to detect incontinence event Solid Amber = Incontinence event detected

Stand Assist

Air Mattress Controls

Normal

Max Inflate

Right Turn

Comfort

Left Turn

Not in Required Position Hold “Adjust Bed Button” or use side rail controls to: Level Bed Straighten Legs Lower Head To Home Screen Cancel

Adjust Bed Button Continue

*Optional Feature

Learn more at hillrom.com. Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warrantyextended on the sale or rental of its products. © 2019 Hill-Rom Services, Inc. ALL RIGHTS RESERVED.

211071 REV 1

16-OCT-2019

ENG – US

FOR DETAILED WARNING AND CAUTION STATEMENTS, AND OPERATING INSTRUCTIONS, REFER TO THE CENTRELLA® BED USER MANUAL (193587).

Previous Page Next Page