Compella Bariatric Bed System P7800A User Manual Rev 1 March 2015

QUICK VIEW™ LIST OF FEATURES For more information about a feature, go to the page number shown for the feature in the tables below.

INTELLIDRIVE® XL TRANSPORT SYSTEM-TRANSPORT POD Item Feature A Disengage Transport Position-press this control to raise the drive wheels off the ground. B Transport Position-press this control to lower the bed to the transport position. Press and hold this control until the control’s indicator is green and you hear a single beep. C Steer Pedal indicator- when this indicator is green, the bed is in steer mode and can be moved. D Battery Charge indicator

Page 42

POWERED WIDTH CONTROLS A

B

Item Feature A Retract-with the siderails raised, press and hold this control to retract the width of the bed. Press and hold the control until the control’s indicator is green and you hear a single beep. B Extend-press and hold this control to extend the width of the bed. Press and hold the control until the control’s indicator is green and you hear a single beep.

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Page 39

39

i

Quick View™ List of Features

CAREGIVER CONTROL POD NOTE: There are two scale systems available for the bed, refer to the images and page numbers shown below to determine which instructions apply to your scale system:

Scale A

Refer to page 51.

Scale B

Refer to page 54.

Item Feature Page A Weigh-press this control to take a weight reading. 53 or 56 B Zero-with the Enable key active, press this control to zero the bed. 52 or 55 C Raise the Bed-the indicator on this control flashes when you attempt 52 or 54 to use a scale control while the bed is in transport position (power drive wheels on the ground). Press and hold the control until the bed is no longer in the transport position (the indicator will turn off, and you will hear a single beep). D Enable key-when active lets you zero the bed, set the Bed Exit alert, set 53 the 30° Head Angle alert, and adjust the alert volume and tone. E Bed Exit: Patient Position mode-with the Enable key active, press this 60 control to set the Bed Exit alert to notify you when the patient begins to move. F Bed Exit: Bed Exiting mode-with the Enable key active, press this 60 control to set the Bed Exit alert to notify you when the patient attempts to get out of the bed. G Bed Exit: Out-of-Bed mode-with the Enable key active, press this 57 or 60 control to set the Bed Exit alert to notify you when the patient has left the bed. H Alert Silence-when a Bed Exit alert is armed, press this control to stop 58 or 60 monitoring the patient movement temporarily (30 seconds). I Alert Volume-with the Enable key active, a patient on the bed, and a 59 or 62 Bed Exit mode armed, press and release this control to adjust the volume of the alert. J 30° Head Angle Alert-with the Enable key active, press this control to 38 be notified when the bed’s head section goes below 30°. K Digital display-shows the head section angle or patient weight. 51 or 54 ii

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Quick View™ List of Features

Item Feature L Magnification (Mag) mode-shows the weight in the nearest 0.5 kg. M Frame Setup-puts the bed in the correct position to zero the scale or weigh the patient. N Release Brake-this indicator flashes if the brakes are set and you attempt to zero the scale.The brakes need to be released to accurately zero the scale. O Scale Reference-this indicator comes on solid when the bed is correctly in the Scale Reference Position. P Zero instructions-shows the sequential steps to zero the scale.

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Page 56 54 54

54 55

iii

Quick View™ List of Features

AIR SUPPLY UNIT The air supply unit has these controls: Arrows

Menu

• • • •

Enter

Help

Menu-selects the Menu options. Enter-moves to and from the Patient Setup screen. Help-shows the Help screen. Arrows-select settings on the Patient Setup screen.

Set Up the Air Surface for the Patient (Refer to page 70) 1. At the Pressure Redistribution screen, press Enter.

2. Use the arrow keys on the right-side of the display to select Height or Weight. 3. Press Increase or Decrease as applicable to enter the correct height or weight. 4. The unit automatically adjusts the pressures for the set height and weight. If necessary, use the arrow keys to move the cursor to the applicable pressure setting: head, seat, or foot, and use the Increase and Decrease controls to adjust the settings. To return all pressure settings to the pressures automatically set by the unit for the set height and weight, press Default. 5. Press Enter to save the pressure settings and return to the Pressure Redistribution screen.

iv

Compella™ Bariatric Bed System User Manual (178951 REV 1)

© 2015 by Hill-Rom Services, Inc. ALL RIGHTS RESERVED. System Manufactured by: Bed Frame and Foam Surface HILL-ROM, INC. 1069 STATE ROUTE 46 E BATESVILLE, IN 47006-9167 USA Therapy Surface and Air Supply Unit TRIDIEN MEDICAL 4200 NW 120 AVENUE CORAL SPRINGS, FL 33065 USA Authorized European Union Representative: HILL-ROM SAS B.P. 14 - Z.I. DU TALHOUET 56330 PLUVIGNER  FRANCE TEL: +33 (0)2 97 50 92 12 Authorized Brazilian Representative: VR MEDICAL – MEDICAL DEVICES IMPORTER & DISTRIBUTOR, LTDA. 391 BATATAES STREET CJ 11-13, 8TH FLOOR SÃO PAULO, SP- BRAZIL CNPJ: 04.718.143/0001-94 No part of this text shall be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information or retrieval system without written permission from Hill-Rom Services, Inc. (Hill-Rom). The information in this manual is confidential and may not be disclosed to third parties without the prior written consent of Hill-Rom. The information in this manual is subject to change without notice. Hill-Rom makes no commitment to update or keep current, the information in this manual. Hill-Rom reserves the right to make changes without notice in design, specifications, and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products. The Compella™ Bariatric Bed product may be covered by one or more patents. For a list of applicable patents, go to www.hill-rom.com/patents. This manual (178951) was originally released and supplied in English. For a list of available translations, contact Hill-Rom Technical Support. First Edition, March 2015 First Printing, 2015 The UL logo is registered trademark of Underwriter’s Laboratories, Inc. Compella™ Bariatric Bed System User Manual (178951 REV 1)

v

Auto Contour™, Compella™, FlexAfoot™, and Quick View™ are trademarks of Hill-Rom Services, Inc. Advanced MicroClimate®, Enhancing Outcomes for Patients and Their Caregivers®,  Hill-Rom®, IntelliDrive®, Line-of-Site®, Point-of-Care®, SideCom®, and SlideGuard® are registered trademarks of Hill-Rom Services, Inc. Replace this manual (178951) if it is damaged and/or can not be read. For product support or to order additional copies of this manual (178951), contact your distributor, local Hill-Rom representative, or go to www.hill-rom.com. Reference Documents Compella™ Bariatric Bed System Service Manual (178952) Compella™ Bariatric Bed Unpacking Instructions (187122)

vi

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Table of Contents Quick View™ List of Features... i IntelliDrive® XL Transport System-Transport Pod... i Powered Width controls... i Caregiver Control Pod... ii Air Supply Unit... iv Set Up the Air Surface for the Patient (Refer to page 70)... iv Intended Use...1 Symbols...2 Product Symbols...2 Acronyms... 17 Safety Information... 18 Quick View™ List of Bed Features... 21 Information Indicators... 22 Audible Indicators... 22 Brake Not Set... 22 Visual Indicators... 23 Battery Charge Indicator (for Bed Frame Articulations)... 23 Service Required... 23 Bed Not Down... 24 Hip Position Locator... 24 Line-of-Site® Head Angle Indicator... 24 No Equipment Zone... 24 Standard Features... 25 CPR Controls... 25 Use the CPR Controls... 25 To Deflate an Air Surface... 25 To Lower the Head of the Bed... 25 To Inflate the Air Surface after CPR... 26 Power Cords... 26 Cord Hooks... 27 Head and Intermediate Siderails... 27 Compella™ Bariatric Bed System User Manual (178951 REV 1)

vii

Table of Contents

Line-of-Site® Angle Indicators... 28 To Lower a Siderail... 28 To Raise a Siderail... 28 Point of Care® Bed Controls... 29 Standard Patient Controls... 29 Head Up/Down... 29 Knee Up/Down... 30 Standard Caregiver Controls on the Siderails... 30 Lockout... 31 Bed Up/Down... 32 Head Up/Down... 33 Knee Up/Down... 33 Tilt and Reverse Tilt... 33 Bed Flat... 34 Cardiac Chair... 34 Battery Back-Up... 34 Brake and Steer Controls... 35 To Activate... 36 Patient Restraint and Drainage Bag Holders... 36 Patient Restraints... 36 Drainage Bag Holders... 37 Equipment Sockets... 37 Night Light... 38 Head Angle Digital Display... 38 30° Head Angle Alert... 38 Set the Alert... 38 Respond to the Alert... 38 Deactivate the Alert... 38 Bed Width Adjustment... 39 Powered Width Controls... 39 Manual Width Control... 40 FlexAfoot™ Bed Length Adjustment... 41 Equipotential Ground... 42 Patient Transport... 42 viii

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Table of Contents

Intellidrive® XL Transport System... 42 Transport Pod... 42 To Prepare the Bed for Transport... 44 Engage Transport Mode... 46 Transport... 46 Disengage Transport Mode... 47 Non-Powered Transport... 48 Transport a Patient... 49 Scale Systems... 51 Scale “A” Display... 51 Bed Setup... 52 To Zero the Scale... 52 Weigh the Patient... 53 Changing the Scale Units... 53 Scale “B” Display... 54 Bed Setup... 54 Scale Reference Position... 54 To Zero the Scale... 55 Weigh the Patient... 56 Magnification (Mag) Mode... 56 Unstable Weight... 56 Single Mode Bed Exit Alert System... 57 To Activate the Bed Exit Alert System... 57 To Silence the Bed Exit Alert System without Deactivating the System... 58 To Deactivate the Bed Exit Alert System... 59 To Adjust the Alert Volume... 59 To Change the Alert Tone... 59 Three-Mode Bed Exit Alert System... 60 To Activate the Bed Exit Alert System... 61 To Silence the Bed Exit Alert System without Deactivating the System... 61 To Deactivate the Bed Exit Alert System... 62 To Adjust the Alert Volume... 62 To Change the Alert Tone... 62 SideCom® Communication System... 63 Compella™ Bariatric Bed System User Manual (178951 REV 1)

ix

Table of Contents

Nurse Call Control... 63 To Activate... 63 Surface Features and Controls... 64 Safety Information... 64 Support Surface Options... 66 Install the Surface and Air Supply Unit... 66 Air Supply Unit... 69 Compella™ Therapy Surface... 70 Set Up the Unit for the Patient... 70 Surface Options... 71 Max Inflate Mode... 71 Fowler Boost Mode... 71 Lock or Unlock the Control Panel... 72 Turn Assist Mode... 72 Deflate and Inflate the Seat Section for Patient Exit or Entry... 74 Continuous Lateral Rotation Therapy (CLRT) Mode... 74 Deflate and Inflate the Side Bolsters and Foot Section... 76 Automatically (using the Caregiver Width Adjust controls)... 76 Manually (using the Air Supply Unit)... 76 Deflate the Side Bolsters and Foot Section for Patient Transport... 78 Compella™ Foam Surface with Inflatable Side Bolsters... 79 Deflate and Inflate the Side Bolsters and Foot Section... 79 Automatically (using the Caregiver Width Adjust controls)... 79 Manually (using the Air Supply Unit)... 79 Deflate and Inflate the Side Bolsters and Foot Section for  Patient Transport... 81 Air Supply Unit-Informational Tones... 81 Accessories... 82 Accessories for North America... 83 IV Pole (P2217A)... 83 To Install... 83 To Remove... 83 Oxygen Tank Holder, Vertical (P27601)... 83 To Install... 83 x

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Table of Contents

To Remove... 84 Patient Helper (P7802A)... 84 To Install... 85 To Remove... 85 Patient Pendant (P7803A01/02)... 85 To Install... 85 To Remove... 86 Pressure Transducer Holder (P3670A05) and Respiratory Circuit Holder (P3670A01)... 86 To Install... 86 Infusion Support System (P158A)... 87 Headboard (P7801A01)... 87 To Remove... 87 To install... 87 Line Managers (P7512A)... 88 Accessories for International... 88 IV Pole Adapter (71438)... 88 Oxygen Tank Holders (AC959A, AD101A, and AD102A)... 88 Pivoting 3-Liter Cylinder holder (AC962A)... 89 Telescopic IV Poles (AD165A and AD148A)... 89 To Use the IV Pole with Four Hooks (AD165A)... 90 To Use the IV Pole with Two Hooks (AD148A)... 90 Syringe-Driver Holder (AC963A)... 90 To Adjust the Holder Position... 91 Cleaning/disinfecting... 91 support Surface Component Identification... 91 Recommendations... 92 Clean and Disinfect the Bed, Air Supply unit, and support Surface... 93 Machine Wash the Topper... 94 Clean the Air Supply Unit Filters... 95 Preventive Maintenance... 96 Batteries... 96 Bed Frame... 97 IntelliDrive® XL Transport System... 97 Compella™ Bariatric Bed System User Manual (178951 REV 1)

xi

Table of Contents

Air Supply Unit-Filters Replacement... 97 Troubleshooting... 98 Solve a System Alarm Condition on a Compella™ Therapy Surface... 98 Solve a System Alarm Condition on a Compella™ Foam Surface... 99 Surface and Air Supply Unit-Power Failure and Alarm Conditions...100 Power Failure...100 Alarm/Alert System...100 Notification Priority...100 Powered Width Extensions will Not Extend or Retract...102 The Head section will not Rise or lower...103 The bed CPR handle does not return to the disengaged Position...103 Service Calls...103 Specifications...104

xii

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Intended Use

INTENDED USE WARNING: Do not use the Compella™ Bariatric Bed System with patients who weigh less than 113 kg (250 lb) or more than 454 kg (1000 lb). Patient injury or equipment damage could occur. WARNING: CONTRAINDICATION: Use of powered air surfaces for patients with unstabilized spinal cord injury could cause serious injury to the patient. The Compella™ Bariatric Bed System is for bariatric patients of all age groups with varying medical and physical conditions. The Compella™ Bariatric Bed System is intended to be used to treat or prevent pulmonary or other complications associated with immobility; to treat or prevent pressure ulcers; or for any other use where medical benefits may be derived from Continuous Lateral Rotation Therapy (CLRT). The bed has an expandable surface and supports patient weights between 113 kg and 454 kg (250 lb and 1000 lb). The intended users of the Compella™ Bariatric Bed System are healthcare employees who have the physical strength and cognitive skills to operate and control the bed. Follow facility safety protocols if an intended user does not have the physical strength or cognitive skills to operate and control the bed. This manual contains information necessary for normal operation of the Compella™ Bariatric Bed, Compella™ Therapy Surface, and Compella™ Foam Surface from Hill-Rom. Before you operate the bed, make sure you read and understand in detail the contents of this manual. It is important that you read and obey the aspects of safety contained in this manual. Any reference to a side of the bed is from the patient’s view lying in the bed on his or her back. The bed is equipped with a scale intended to weigh the patient in the bed. To identify which model of bed you have, look at the serial number label. The label is under the foot end of the bed. For example, PXXXXMXXXX identifies an M model bed.

Compella™ Bariatric Bed System User Manual (178951 REV 1)

1

Symbols

SYMBOLS This manual contains different typefaces and symbols to make the content easier to read and understand: • Standard text-used for regular data. • Boldface text-emphasizes a word or phrase. • NOTE:-sets apart special data or important instruction clarification. • WARNING or CAUTION

– –

A WARNING identifies situations or actions that may have an effect on patient or user safety. To ignore a warning could cause patient or user injury. A CAUTION identifies special procedures or precautions that persons must obey to help prevent equipment damage.

PRODUCT SYMBOLS Symbol

Description

CPR CPR instruction label-shows how to operate the CPR function on the air supply unit (1) and bed frame (2) (page 25)

CPR mechanism label for the air surface-shows the direction to turn the CPR mechanism to deflate the surface (page 25) CPR control label for the bed frame-shows how to operate the CPR control to lower the head section (page 25)

2

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Symbols

Symbol

Description

Caregiver Control Panel Nurse Call control (page 63)

Service Required indicator (page 23)

Bed battery charge status (page 23)

Chair position control (page 34)

Bed flat control (page 34)

Tilt control (page 33)

Reverse tilt control (page 33)

Width retract control and indicator (page 39)

Compella™ Bariatric Bed System User Manual (178951 REV 1)

3

Symbols

Symbol

Description Width extend control and indicator (page 39)

FlexAfoot™ bed length adjustment (page 41)

Bed Up and Down controls (page 32)

Bed Not Down indicator-comes on when the upper frame is not in the lowest position (page 24)

Head Up and Down controls (page 33)

Knee Up and Down control (page 33)

4

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Symbols

Symbol

Description Lockout control-Lock out articulation controls (page 31)

Caregiver Control Pod Scale Weigh control (page 53 and page 56)

Zero control (page 52)

Zero control-Scale B (page 55)

Magnification Mode control-Scale B (page 56)

Frame Setup control and indicator-Scale B (page 54)

Raise Bed control and indicator-Scale B (page 54)

Scale Reference indicator-Scale B (page 54)

Compella™ Bariatric Bed System User Manual (178951 REV 1)

5

Symbols

Symbol

Description Release Brake indicator-Scale B (page 54)

30° Head Angle Alert control (page 38)

Raise Bed control and indicator (page 52)

Alert Silence control and indicator (page 58 and page 60)

Enable key (page 51, page 57, and page 60)

Bed Exit Alert System-Patient Position mode (page 60)

Bed Exit Alert System-Bed Exiting mode (page 60)

Bed Exit Alert System-Out-of-Bed mode (page 57 and page 60)

6

Compella™ Bariatric Bed System User Manual (178951 REV 1)

Symbols

Symbol

Description Bed Exit Alert System Volume and Tone Control (page 59 and page 62)

Indicators on the Siderails Hip Position Locator (page 24)

Tilt/Reverse Tilt angle (page 24)

Head angle (page 24)

Patient Controls Nurse Call control (page 63)

Head Up and Down controls (page 33)

Compella™ Bariatric Bed System User Manual (178951 REV 1)

7