KH 324 THERAPY COUCH 2 SECTION Operating, Maintenance and Cleaning Instructions a

INDEX PAGE SAFETY PRECAUTIONS

2

OPERATING INSTRUCTIONS

2

MAINTENANCE INSTRUCTIONS

2

CLEANING INSTRUCTIONS

3

WARNING IMPORTANT SAFETY PRECAUTIONS. The KH 324 has been designed and manufactured with safety and function for both the patient and the carer as the utmost importance. The recommended max load rating for the table is 100Kg. Users must read and follow the manual to ensure all safety precautions are not compromised. Never have any loose objects in the vicinity of the couch when using any of the functions, as these may snag with the moving components. For safety precautions always check the surrounding area and under the trolley for any objects that may be crushed with any movement of the trolley.

OPERATING & MAINTENANCE INSTRUCTIONS To ensure that all the safety features of the product are not compromised please read the following instructions carefully. 1.

ELECTRICALLY OPERATED HI/LOW FUNCTION. The couch can be lowered/raised to any position require (Min 530mm - Max 930mm). This function is via the Foot or Hand Switch (fig 1.) Fig 1.

Fig 2.

Fig 3.

MAINTENANCE INSTRUCTIONS LUBRICATION There are several parts on the KH 325 couch, that requires periodical lubrication. These are Crank assembly (fig 4 ), Backrest pivot points (fig 5.) and actuator mountings (fig 6.). These parts need lubrication every 4 months. Simply spray TAC-2 up into the joints while operating the function.

Extreme caution needs to be maintained when operating these functions while lubrication is being done, and should only be done by a competent maintenance person. Caution:- Remove all excess over spray as this may damage the epoxy coating and could cause a hazardous situation if excess be allowed to drip onto the floors.

Crank pivot Fig 4.

Backrest pivot Fig 5.

Actuator mounts Fig 6.

NOTE: TAC-2 IS A CRC PRODUCT AND IS AVAILABLE FROM MOST AUTOMOTIVE OUTLETS OR THROUGH: - Kerry Equipment

CLEANING INSTRUCTIONS 1.The KH324 Couch can be cleaned with a low strength detergent, warm water and a soft textured cloth. This includes all epoxy powder coated framework and the Vinyl top. VINYL TOP Protect from direct sunlight. Do not puncture with any sharp objects. Repair any tears immediately. SPOT CLEANING Treat spills and stains as soon as possible. Gently scrape away any soils or mop away liquid from surface of fabric with damp cloth.

Use water or other cleaning liquid sparingly. Do not allow water or liquid to spill onto the electrical system. Supplied by: