User Guide
88 Pages
Preview
Page 1
InSight® 2 Mini C-arm User Guide MAN-04857 Revision 006
InSight® 2 Mini C-arm Imaging System
User Guide Part Number: MAN-04857 Revision 006 July 2020
Caution: Federal (U.S.A.) law restricts this device to sale by or on the order of a physician (or properly licensed practitioner). Customer Support Toll Free in USA: +1.800.321.4659 Email: [email protected] In Europe, South America, or Asia, contact your local dealer or distributor.
© 2017 - 2020 Hologic, Inc. Printed in the USA. This manual was originally written in English. Hologic, Fluoroscan, InSight, MegaView, and associated logos are trademarks and/or registered trademarks of Hologic, Inc. and/or its subsidiaries in the U.S. and/or other countries. Any other product and company names mentioned herein are the trademarks of their respective owners. This product may be protected by one or more U.S. or foreign patents as identified at www.Hologic.com/patent-information.
InSight 2 Mini C-arm User Guide Table of Contents
Table of Contents 1 Indications for Use...1 2 Radiation Safety ...1 2.1 General ... 2 2.2 Radiation Dose and Dose Rate ... 2 2.3 X-ray Shielding ... 3
3 Regulations for X-ray Equipment ...3 3.1 United States Federal and State Regulations... 3 3.2 IEC Regulations ... 3 3.3 Canadian Regulations... 4
4 EMI...4 5 Accessories ...4 6 InSight 2 System Labels ...5 6.1 System Main Label ... 5 6.2 X-ray System Warning Label ... 6 6.3 Electric Shock Warning Label... 6 6.4 No Pushing Warning Label... 6 6.5 ISO 7010-M002 Label... 7
7 Symbols ...7 8 Safety Hazards...9 9 System Components...14 10 Controls and Indicators ...15 10.1 X-ray Head Control Panel ... 15 10.2 Keyboard Controls ... 15 10.3 InSight 2 System Footswitch Functions... 17 10.3.1 Acquire an X-ray Image ... 18 10.3.2 Display a MegaView Image ... 18 10.3.3 Tag an Image ... 18 10.3.4 Save an Image... 18 10.3.5 Print an Image ... 18
11 Using the System ...19 11.1 Moving the System... 19 11.2 Adjusting the C-arm... 20 11.3 Sterile C-arm Drape... 21 11.4 Powering Up the System ... 22
MAN-04857 Revision 006
i
InSight 2 Mini C-arm User Guide Table of Contents
11.5 Powering Down the System... 22
12 Configuring the Application ...23 12.1 System Configuration User Interface ... 23 12.2 System ... 23 12.3 DICOM Send Options... 26 12.3.1 DICOM Print Options ... 28 12.4 Worklist Configuration... 30 12.4.1 Users ... 32 12.5 Physician Preferences... 33 12.6 Physician Preferences - Image Acquisition ... 34 12.7 Physician Preferences - Image Processing... 37 12.8 Physician Preferences - Image Management ... 39 12.9 Administrative Settings Page ... 40
13 Using the InSight 2 Application ...41 13.1 Main Screen ... 41 13.2 Image Acquisition Session ... 47 13.2.1 Select or Enter Patient Window ... 47 13.2.2 Image Acquisition Screen ... 48 13.2.3 Select Reference Images Window... 54 13.3 Review Images Session ... 56 13.3.1 Select Study for Review Window ... 56 13.3.2 Review Screen... 58 13.3.3 Enhanced Displayed Image Screen ... 61 13.4 Maintaining Patient Study Records ... 62 13.4.1 Update Patient Study Information Window... 62 13.5 Export Images ... 63 13.5.1 Export from Review Images Screen ... 63 13.5.2 Export from Review Images Screen ... 65 13.6 Import Images Window ... 68 13.7 Delete Images Window... 70 13.8 View DICOM Queue Window ... 72
14 System Maintenance ...74 14.1 System Backup ... 74 14.2 System Recover ... 74 14.3 Cleaning ... 74 14.3.1 Recommended Cleaning Agents ... 74 14.4 Preventative Maintenance... 75
ii
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide List of Figures
List of Figures Figure 1: InSight 2 Mini C-arm ... 1 Figure 2: System Main Label ... 5 Figure 3: X-ray System Warning... 6 Figure 4: Electric Shock Warning... 6 Figure 5: No Pushing Warning*... 6 Figure 6: ISO 7010-M002 Label ... 7 Figure 7: Wireless Footswitch ... 17 Figure 8: Transport Position Knob ... 19 Figure 9: Rear Casters... 20 Figure 10: Adjusting the C-arm... 21 Figure 11: Sterile C-arm Drape... 21 Figure 12: System Configuration Menu... 23 Figure 13: System ... 24 Figure 14:
DICOM Send Options ... 26
Figure 15:
DICOM Print Options ... 28
Figure 16: Worklist Configuration... 30 Figure 17: Users ... 32 Figure 18: Physician Preferences ... 33 Figure 19: Physician Preferences - Image Acquisition ... 35 Figure 20: Physician Preferences - Image Processing ... 37 Figure 21: Physician Preferences - Image Management... 39 Figure 22: Main Screen ... 41 Figure 23: System Configuration Pull-down Menu ... 42 Figure 24: System Configuration Menu ... 43 Figure 25: Tools Pull-down Menu ... 45 Figure 26: Select or Enter Patient Window... 47 Figure 27: Image Acquisition Screen... 48 Figure 28: Image Effects Menu... 49 Figure 29: Configure Image Area Menu ... 50 Figure 30: Image Acquisition Screen Buttons ... 51
MAN-04857 Revision 006
iii
InSight 2 Mini C-arm User Guide List of Figures
Figure 31: Reference Images Window ... 54 Figure 32: Study for Review ... 56 Figure 33: Review Images Screen ... 58 Figure 34: Patient Details ... 60 Figure 35: VISTA Details... 60 Figure 36: Enhanced Displayed Image Screen... 61 Figure 37: Tools Menu ... 62 Figure 38: Image Export from Review Screen ... 64 Figure 39: Export Images ... 64 Figure 40: Tool Menu Export... 65 Figure 41: Export Images from Tool Menu ... 65 Figure 42: Tools Menu... 68 Figure 43: Import Images Window ... 68 Figure 44:
Delete Images ... 70
Figure 45: Patient Selected ... 71 Figure 46: Image selected for Deletion... 71 Figure 47: View DICOM Queue... 73
iv
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide List of Tables
List of Tables Table 1 Safety Hazards ...9 Table 2: System Components ...14 Table 3 X-ray Head Control Panel ...15 Table 4 Keyboard Controls ...15 Table 5 Footswitch Pedal Functions ...17 Table 6 Conditioning Schedule ...22 Table 7 System Configuration User Interface ...23 Table 8 System Page ...25 Table 9 DICOM Send Options Page ...26 Table 10 DICOM Send Options Page, Button Functions ...27 Table 11 DICOM Print Options Page, Section/Field Descriptions ...28 Table 12 DICOM Print Options Page, Button Functions ...29 Table 13 Worklist Configuration, Section Descriptions ...30 Table 14 Worklist Configuration, Button Functions ...31 Table 15 Users Page, Section/Field Descriptions ...32 Table 16 Users Page, Button Functions ...32 Table 17 Physician Preferences, Section/Field Descriptions ...33 Table 18 Physician Preferences, Button Functions ...34 Table 19 Physician Preferences, Image Acquisition Tab, Section/Field Descriptions ...36 Table 20 Physician Preferences, Image Processing Tab, Section/Field Descriptions ...38 Table 21 Physician Preferences, Image Management Tab, Section/Field Descriptions ...39 Table 22 Administrative Settings, Section Descriptions ...40 Table 23 Administrative Settings, Button Functions ...40 Table 24 Main Screen Options ...41 Table 25 System Configuration Menu ...43 Table 26 Tools Menu ...45 Table 27 Select or Enter Patient Window, Section/Field Descriptions ...47 Table 28 Select or Enter Patient Window, Button Functions ...48 Table 29 Image Acquisition Screen ...48 Table 30 Image Effects Menu ...49
MAN-04857 Revision 006
v
InSight 2 Mini C-arm User Guide List of Tables
Table 31 Configure Image Area Menu ...50 Table 32 Image Acquisition Screen, Button Functions ...51 Table 33 Tool Set ...52 Table 34 Select Reference Images Window, Section Descriptions ...55 Table 35 Select Reference Images Window, Button Functions ...55 Table 36 Select Study for Review Window, Section/Field Descriptions ...57 Table 37 Select Study for Review Window, Button Functions ...57 Table 38 Review Screen, Button Functions ...58 Table 39 Detailed Image Viewing Screen, Button Functions ...61 Table 40 Update Patient/Study Information Window, Section Descriptions ...62 Table 41 Update Patient/Study Information Window, Button Functions ...63 Table 42 Export Window, Section Descriptions ...66 Table 43 Export Window, Button Functions ...67 Table 44 Import Window, Section Descriptions ...69 Table 45 Import Window, Button Functions ...69 Table 46 Delete Images Window, Section Descriptions ...72 Table 47 Delete Images Window, Button Functions ...72 Table 48 Queue Window, Section Description and Button Functions ...73
vi
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide Indications for Use
1 Indications for Use The InSight® 2 Mini C-arm is a Mini C-arm Fluoroscopic Imaging System designed to provide physicians with general fluoroscopic visualization of a patient, including, but not limited to surgical orthopedic and podiatry use, critical and emergency care procedures, and light anatomy imaging situations. Figure 1 InSight 2 Mini C-arm
2 Radiation Safety Improper imaging procedures or the failure to observe radiation safety and technique factor recommendations could result in increased exposure. It is the operatorʹs responsibility to observe all safety procedures and to keep radiation exposures As Low As Reasonably Achievable (ALARA) and to comply with all national, state and local regulatory requirements.
MAN-04857 Revision 006
1
InSight 2 Mini C-arm User Guide Radiation Safety
Hologic® recommends that all members of the operating staff wear a radiation monitoring device. This is usually a film badge or TLD (thermoluminescent dosimetry) dosimeter which will record any radiation dose over a specific period of time. The physician should wear a ring badge to record any exposure to his/her hands.
2.1
General A fluoroscopic device emits a continuous beam of X-rays in order to view an object in real-time. Primary radiation is present in the space between the X-ray source and the detector screen. The operator should never place his/her own hands in the beam. Secondary radiation or X-ray scatter is caused by X-rays that do not fully penetrate the object placed in the primary beam. X-ray scatter has considerably less energy than the primary beam and is absorbed by other objects in the immediate area. The amount of scatter depends upon the power setting used, the density and proximity of the body part to the beam, and the length of exposure time.
2.2
Radiation Dose and Dose Rate Radiation received by each kilogram of a patient’s body is called dose. Dose rate refers to the dose received per unit time. Distance from the X-ray source reduces dose to both the patient and the operator. For example, at maximum output the dose is 2.6 mGy/minute at the image receptor and 45 mGy/minute at the Tube Housing exit port, or 17 times greater. This higher value is known as the maximum Entrance Exposure Rate (EER). Scattered radiation decreases with the square of the distance in exactly the same way as noted previously for X-rays in the primary beam. However, as the dose rate is much less, scatter is usually expressed in mR/hour (1 mR = 0.01 mGy). Dose and scatter data for the InSight 2 Mini C-arm is available from Hologic upon request.
2
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide Regulations for X-ray Equipment
2.3
X-ray Shielding The scattered radiation from the InSight 2 Mini C-arm is low compared to many other radiological devices, and the requirement to wear protective lead aprons and/or attenuating gloves is governed by applicable facility policy. Also many states, provinces, countries, and individual institutions may require persons in the same room with any operating fluoroscopic device to wear lead aprons. The strict observation of safe operating practices and the use of minimal fluoroscopic times is the key to reducing user exposure.
3 Regulations for X-ray Equipment 3.1
United States Federal and State Regulations InSight 2 Mini C-arm Systems conform to the United States Code of Federal Regulations, 21 CFR 1020.32 “Performance Standards for Ionizing Radiation Emitting Products: Fluoroscopic Equipment.” However, additional state regulations may apply to X-ray products. This may require notifying your state regulatory agency about your installation and/or operator training and certification. It is the responsibility of the user to contact the applicable state radiation control agency to verify that your installation is in compliance with regulations in your state governing installation and use of X-ray equipment. The InSight 2 Mini C-arm complies with 21CFR Subchapter J. The InSight 2 Mini C-arm is intended for special surgical applications that would be prohibited at the Source to Skin Distances (SSD) specified in 21CFR 1020.32 (g) but are permitted under 21CFR 1020.32 (g) (2). The SSD is 10 cm minimum.
3.2
IEC Regulations The InSight 2 Mini C-arm complies with the requirements of IEC 60601-1. The classification of the InSight 2 Mini C-arm under this specification is Class 1, Type B. The InSight 2 Mini C-arm Systems comply with the following IEC standards: IEC/EN 60601-1
IEC/EN 60601-1-3
IEC/EN 60601-2-28
IEC/EN 60601-1-2
IEC/EN 60825-1
IEC/EN 60601-2-54
MAN-04857 Revision 006
3
InSight 2 Mini C-arm User Guide EMI
3.3
Canadian Regulations InSight 2 Mini C-arm Systems comply with CSA C22.2 No. 601.1
4 EMI This instrument is designed to be compatible with the electromagnetic environments specified in IEC60601-1-2 and will operate satisfactorily when placed in an environment that includes other equipment complying with that standard. If equipment that is not electromagnetically compatible is placed into the environment where the InSight 2 Mini C-arm is used, the InSight 2 Mini C-arm Imaging System or the non-compliant equipment may malfunction or exhibit other anomalous behavior. Consult the appropriate field service engineer.
5 Accessories This instrument is supplied with hardware and software accessories that are needed for safe and reliable operation. Additional accessories may be used to perform optional procedures. Do not use any accessories with this instrument other than those approved by Hologic.
4
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide InSight 2 System Labels
6 InSight 2 System Labels 6.1
System Main Label The System Main Label is on the back of the base cabinet.
Figure 2 System Main Label
MAN-04857 Revision 006
5
InSight 2 Mini C-arm User Guide InSight 2 System Labels
6.2
X-ray System Warning Label The X-ray System Warning Label is on the front of the base cabinet below the Computer On/Standby switch.
Figure 3 X-ray System Warning
6.3
Electric Shock Warning Label The Electric Shock Warning Label is located near the fasteners for panels covering high voltage components.
Figure 4 Electric Shock Warning
6.4 No Pushing Warning Label The No Pushing Warning Label is located on the back of the base cabinet. Figure 5 No Pushing Warning*
*Do not push the system with the casters locked or obstructed and the C-arm extended.
6
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide InSight 2 System Labels
6.5
ISO 7010-M002 Label
Figure 6 ISO 7010-M002 Label
The ISO 7010-M002 Label, refer to instruction manual/booklet, is located on the back of the base cabinet. Note
MAN-04857 Revision 006
On ME Equipment “Follow instructions for use.”
7
InSight 2 Mini C-arm User Guide Symbols
7 Symbols
8
CSA listed device
ISO 7010-M002, Refer to instruction manual/booklet
Dangerous voltage
Caution
Type B applied part
X-ray filtration
Warning: Electricity
AC Voltage
Time delay fuse
Protective earth (ground)
Earth (ground)
Equipotentiality
USB connector
Electrostatic sensitive device
Discard electrical and electronic equipment separately from standard waste. Send decommissioned material to Hologic or contact your service representative.
Computer On/Standby switc
Rear wheels free to move in all directions
Rear wheels move forward and back only
Locking, general
Manufacturer
Date of Manufacture
Catalog number
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide Symbols
Radiation of Laser apparatus
X-ray source emitting
Store
Increase or decrease kV/mA
Rotate image
Cycle through the noise suppression settings limit
Serial number
No pushing
MAN-04857 Revision 006
9
InSight 2 Mini C-arm User Guide Safety Hazards
8 Safety Hazards Table 1
The following table itemizes various safety hazards. Each hazard is cross referenced with the respective cause and proper course of action. Safety Hazards
Safety Hazard
Cause
Course of Action
Radiation Safety
This system produces Although operating this ionizing radiation and system can result in low scatter may be dangerous to radiation levels, it is patients and operators recommended that protective unless the safety and X-ray clothing be worn and operating instructions in radiation safety precautions be this manual are followed. observed when operating the system. Operators should avoid placing their hands or any part of their bodies in the path of the X-ray beam. When making X-ray exposures, place the anatomy close to the Image Intensifier for the best image quality and to reduce exposure to radiation. An alarm sounds after every five minutes of accumulated exposure time.
Electrical Safety
Electrical circuits Safety covers have been inside the system can designed for this system to cause serious injury or mitigate the hazards caused by death. electrical circuits and high This system operates on voltages. Never remove the high voltages. High covers or operate the system voltages are at the while the covers are off. If any following locations: cover is off, request service X-ray tube: 75,000 Volts. before using the system. Unplugging the power cord from the wall is the only way to disconnect main power from this system.
10
MAN-04857 Revision 006
InSight 2 Mini C-arm User Guide Safety Hazards
Table 1
Safety Hazards (Continued)
Safety Hazard
Cause
Overbalance Hazard Placing too much weight on the C-arm may cause the system to overbalance. The amount of weight that can be supported by the Intensifier is highly variable, depending on the position of the flex-arm, C-arm, and other factors. This hazard is greatest when the flex-arm is extended and moved to the far left or right of the system.
Course of Action If weight is to be applied to the C-arm, caution must be used to prevent the device from becoming unstable. Do not place the full weight of the lower extremity directly on the Image Intensifier. Do not attempt to move the system from the left or right side or by pushing on the system C-arm or the mast when the casters are locked or obstructed.
Imaging Function Loss
Intensifier damage from surgical tools (i.e, drills coming into contact with the detector surface)
Unauthorized Modifications to X-ray Tube
Do not make any changes to Never remove the the X-ray tube. Contact a housing around the X-ray tube or make any Hologic Representative to replace the X-ray tube. changes to the X-ray tube. When the product leaves the manufacturing plant and at the time of installation, the X-ray source and assembly meet the requirements of 21 CFR 1020.30-32. Any unapproved change to the system could cause death, injury or expensive damage to the equipment, and could void the service agreement.
MAN-04857 Revision 006
Do not use the C-arm Image Intensifier as a working surface.
11