C-Mac 8404 ZXK HD Monitor Quick Guide V1.0

C-MAC® HD Monitor – Quick Guide –

b

Switching the monitor to standby mode Standby mode enables the monitor to be quickly ready for operation again after brief interruptions. Briefly press the On/Off button. monitor switches to standby mode after 20 minutes of inactivity. 1 The This time may be longer depending on the video unit connected.

Mounting the monitor Attach the stand holder to the rear of the monitor using 4 screws. Press the sides of the holder together so that the bar can slide through the holes. Release the holder once you get to the position you want. The holder's own tension will keep the device in this position.

Connecting the power adapter and charging the monitor Plug the power adapter's power plug into the the corresponding socket on the monitor. Secure the connector with the swivel nut. Plug the power adapter into the wall socket while holding the cable on the plug housing. The C-MAC HD monitor can run on both power from the power cord and on power from the integrated battery.

1

Saving images and recording video Insert the SD card into the monitor in the correct position. The C-MAC HD monitor is compatible with SDHC SD cards (class 10 or higher) that have been formatted to FAT32 and have a transfer speed of at least 80 MB/s and a storage capacity of up to 32 GB. Correct operation cannot be ensured if any other memory cards are used.

1

sure that the monitor is turned off when inserting the SD card so 1 Make that the card is successfully detected.

Using the HDMI port Connect the external C-MAC monitor to the C-MAC HD monitor's HDMI port. The connected monitor must support full HD resolution (1920 x1080).

1

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

c

Using a USB stick Insert the USB stick into the USB port on the side of the monitor. The information area displays the available memory capacity.

1 can copy recorded images and videos from the SD card to the 1 You USB stick in the function space. Please refer to the menu navigation information in the following pages.

1

2

2.1 2.2

2.3

2.4

1 2 2.1

Information bar Menu bar Status bar

2.2 2.3 2.4

Access to information area Video unit functions Access to function space

1. Information bar Video recording Video recording has started

Freeze The freeze function is active and the live image is frozen.

Video unit controls Video recording using the buttons on the video unit is locked.

Image position The live image is rotated by 180°.

Audio recording Video is being recorded with audio.

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

d

2. Menu bar 2.1 Status bar No memory card No memory card was detected.

Low battery, below 20%

Memory card available The inserted memory card was detected.

Critically low battery 10 % The red bar is flashing.

Memory capacity is low Less than 300 MB of memory available.

Critically low battery Approx. 10 minutes of battery power left.

Memory capacity is critical Flashing red: Less than 100 MB of memory available.

The battery is charging.

Battery charge state

Replace battery The battery has less than 50% of its original maximum capacity.

2.2 Information area The information area provides the following details: – Item number, firmware version, and, depending on the connected accessories, the number of cycles and the operating time of the connected video unit – Memory capacity and remaining storage space on the SD card being used – Memory capacity and remaining storage space on the USB stick being used – Battery charge state – C-MAC HD monitor firmware version

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

e

2.3 Video unit functions Video recording Starts or stops a video recording. This function is only available if an SD card has been inserted.

Switch video unit This function is only available if two video units are connected.

Image capture Captures and saves images. This function is only available if an SD card has been inserted.

Picture-in-Picture (PiP) The live image from the secondary video unit will be shown in a window at the bottom left of the live image from the primary video unit. This function is only available if two video units are connected. Side-by-side If two video units are connected, the live images of both video units are shown next to each other. The live image on the left displays the image from the primary video unit. This function is only available if two video units are connected. Show and hide menu bar In the 16:10 screen format, the menu bar can be shown or hidden.

Full screen Displays the live image from the primary video unit. This function is only available if the picturein-picture or side-by-side viewing mode has been activated. 2.4 Function space Microphone

Brightness

Default setting: The microphone is muted and must be activated manually in the password-protected settings.

Adjusts the brightness of the monitor. Hue Adjusts the hue of the monitor.

Screen settings

Saturation

The menu for the screen settings is displayed and can be used to adjust the monitor's hue, saturation, contrast, and brightness settings.

Adjusts the saturation of the monitor. Contrast Adjusts the contrast of the monitor.

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

f

Still image (freeze)

Factory settings

Enables or locks the Freeze function.

Resets the primary video unit to the factory settings.

Operation via video unit

Clear SD card

Enables or locks the operating buttons on the video unit. Only available if a video unit with a button lock function is connected.

Deletes the content of the SD card. Only available if an SD card has been inserted.

White balance

SD card to USB stick

Performs the white balance.

Transfers the content of the SD card to a USB stick. Only available if an SD card and USB stick have been inserted.

Timer Activates or deactivates the timer.

Date and time Sets the date and time. Image position The displayed live image is in its original position or has been rotated by 180°.

Password-protected settings Calls up the protected system settings. Confirm

Stop

Increase value

Decrease value

Pause

Cancel

Select

Play

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

g

2.4.1 Password-protected settings A default password is set when the product is delivered. It is 0000. If you lose your password, please contact KARL STORZ Technical Support.

1

Audio recordings Enables or disables the microphone for audio recordings.

Firmware update for video unit Updates the firmware of the connected video unit. This function is only available if an SD card with update files has been inserted, a video unit is connected, and the power supply is sufficient.

Automatic video recording

Firmware update

Enables or disables automatic video recording. If the function is enabled, video recording starts automatically as soon as a video unit is connected.

Updates the firmware of the C-MAC HD monitor.

Changing a password Used to change the password for the protected area.

License information Calls up the license information for the product and the software source code.

This function is only available if an SD card with update files has been inserted and the power supply is sufficient.

Exports the system log (log files) to the inserted SD card.

This document is not intended to replace the instructions for use! For more information on how to set up, maintain, and reprocess the C-MAC video units and the C-MAC HD monitor, please refer to the corresponding instructions for use and reprocessing instructions. These documents can be downloaded at www.karlstorz.com/IFU. For technical support, please contact our Service department ([email protected])

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

V1.0 – 03/2023

C-MAC® HD Monitor – Quick Guide –

h

C-MAC® HD Monitor

C-MAC® connection cable

H1 C-MAC® S Camera head Pediatric IMAGER

Endoscopes & fiberscopes

FIVE & FIVE S

C-MAC® S IMAGER

C-MAC® Video Laryngoscopes

KARL STORZ SE & Co. KG, Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen, Germany

C-MAC® VS

V1.0 – 03/2023