AIDA Compact II Image Capture sw ver 2.4 Simplified Instructions

AIDA Compact II Image Capture System (Software v 2.4) Simplified Instructions 1

Ensure the AIDA Touch Screen and AIDA Printer are switched ON, then switch ON AIDA Control.

2

Allow system to POWER UP.

3

If AIDA Compact II programme does not start automatically, double click the AIDA Compact icon.

4

Any patient data in the Buffered Procedures will be displayed. To view or delete the data tick the patient check box and select the relevant icon. To write the data to a CD/DVD/USB stick insert the required media, press the GREEN TICK and follow the on screen prompts. To continue without viewing or writing any data press the RED CROSS.

5

Double click on the yellow LAST NAME data field and enter the patients last name using the touch screen keyboard (this field is mandatory otherwise the system will not allow image capture).

6

All other data fields can be completed as required using the touch screen keyboard and drop down boxes. If patient data has been entered but no images or videos captured, right click on mouse and select NEW to clear the data fields.

7

Ensure the image viewed on the operating monitor is also displayed on the AIDA touch screen. If not press the FREEZE icon twice.

8

To capture a still image either press the relevant camera head button or press the STILL CAMERA icon on the touch screen. A small thumbnail of the captured image will appear in the lower left hand part of the touch screen. (The live image may be frozen prior to capture by pressing the FREEZE icon).

9

PLEASE NOTE: THE AIDA COMPACT II PROGRAMME IS DESIGNED SOLELY AS AN IMAGE CAPTURE SYSTEM AND SHOULD BE USED ONLY AS AN IMAGE CAPTURE SYSTEM. THE DOCUMENTED IMAGES ARE NOT APPROVED FOR DIAGNOSIS. COMPREHENSIVE INSTRUCTIONS ARE CONTAINED WITHIN THE AIDA COMPACT II INSTRUCTION MANUAL. PLEASE ENSURE ANY DATA STORED ON THE AIDA CONTROL HARD DRIVE IS ONLY RETRIEVED FROM THE “EXPORT TO DIRECTORY” FOLDER. FOR FURTHER INFORMATION PLEASE CONTACT YOUR LOCAL KARL STORZ REPRESENTATIVE.

Check box

View selected patient data

Delete selected patient data

Freeze

To start recording a video clip either press the relevant camera head button or press the VIDEO CAMERA icon on the touch screen. To end recording press the same camera head button or the VIDEO CAMERA icon. Whilst recording a green light will flash on the VIDEO CAMERA icon.

10 At the end of the procedure press the GREEN TICK to enter the review the screen.

Freeze

Still

Video

Audio

Enter review screen