ACTIV.A.C Therapy System with iOn PROGRESS Quick Reference Guide for Patients Rev C

Introduction

Charge the Battery

Your ACTIV.A.C.™ Therapy System is equipped with iOn PROGRESS™ Remote Therapy Monitoring. As a result 3M will be able to monitor your ACTIV.A.C.™ Therapy System usage to aid in your recovery. You will not need to do anything as your unit is specially equipped with this capability. You can expect phone calls from a 3M representative to discuss your ACTIV.A.C.™ Therapy System usage.

1. Plug the power cord into the power supply (Fig. 1).

Your ACTIV.A.C.™ Therapy System has a different power cord than described in the user manual. Use these instructions to connect your ACTIV.A.C.™ Therapy Unit to the provided power supply.

Power Supply Fig. 1

Power Cord To AC wall outlet

Charging Cord

For Patients

4. Keep the unit plugged in whenever possible. The plug icon appears on the touch screen when the unit is plugged in.

Fig. 3

The battery charging light will glow amber while unit is charging (Fig. 2). The light will change to green when the unit is fully charged.

The power cord may be a trip hazard. Ensure that all cords are out of areas where people may walk.

Battery Charging Light

Unplug the power cord from the wall outlet to disconnect the unit from main power.

Power Connection

Rx Only

3. Plug the charging cord into therapy unit (Fig. 2 and 3).

It should take about six hours to fully charge the battery.

Remote Therapy Monitoring Module

Quick Reference Guide

2. Plug the power cord into an AC wall outlet (Fig. 1).

Fig. 2