EnClean Brush Instructions for Use

En

Clean® BRUSH

Reusable. Instructions-For-Use. 1

2

Remove brush cap.

3

Water bristles with clean water.

5

As you clean the connector, rinse the bristles in clean water to remove any debris. Repeat steps 4 and 5 until the connector is clean.

Insert the wet bristles into the ENFit® Connector until they reach the bottom. Make sure the plug is inserted into the opening.

6

Rotate the EnClean® Brush to clean the inside and bottom of the EnFit® Connector.

7

After you have cleaned the connector, rinse the bristles with antiseptic mouthwash then replace cap.

The EnClean® Brush is designed to clean and remove debris from the ENFit® enteral connector. Description EnClean® Reusable Cleaning Brush EnClean® Single-use Cleaning Brush

Stand upright to dry (as shown). Now your brush is clean and ready to use again.

Reusable Brush

Ordering Information. Item Code ENC2 ENC1

4

Quantity 10 100

For more information please contact your Cardinal Health ANZ customer service on: Phone 1800 077 421 (1 for Customer Service, then 6 for Cardinal Health) Email: [email protected]

In partnership with

For additional instructions on how to use please visit the EnClean® website www.encleantube.com ENFit™ is a registered trademark of GEDSA. EnClean® is a registered trademark of LumaClean, LLC. Cardinal Health Australia. Level 2, 5 Eden Park Drive, North Ryde NSW 2113 © 2020 Cardinal Health. All Rights Reserved. Cardinal Health LOGO and ESSENTIAL TO CARE are trademarks or registered trademarks of Cardinal Health. All other marks are the property of their respective owners. 1793 Doc ref: MSCR-192