Kendall
Kangaroo Connect Quick Start Directions for Use
Directions for Use
2 Pages
Preview
Page 1
Kangaroo™ Connect Enteral Feeding Pump “Quick Start” Directions For Use
Pump Overview
1. Soft Keys Press a key to select the option that appears next to it on the screen. 4
1
2. Power Button Press once to power on. Press and hold to power off. 3. Power Source Shines a green light when the pump is connected to AC power.
2
3
Setting up the pump
4. Pump Status = Warning Alarm = Notice or Caution Alarm = Standby or Feeding
Priming the pump
1. Select Priming mode. 1. Press the Power button
2. Load set (insert from the bottom and snap into place).
3. Select Prime.
If you selected Auto Prime: 2. Wait for pump to finish priming.
If you selected Hold to Prime: 2. Press and hold Prime Feed until fluid reaches end of tubing.
Kangaroo™ Connect Enteral Feeding Pump “Quick Start” Directions For Use
Starting a feeding
Powering down the pump
1. Select Clear Settings. Press and hold the Power button for 3 seconds.
2. Use the plus (+) and minus (-) buttons to enter the rate, then select OK.
Ensuring the correct fluid level
10" (25.4 cm)
3. When ready to begin feeding, select Start.
Make sure the top of the fluid column is placed at 10 inches (25.4 cm) above the center of the pump rotor. 4. To suspend the feeding, select Pause.
5. To resume feeding, select Continue.
For additional operations or information, see the Kangaroo Connect Enteral Feeding Pump Operations Manual or visit www.kangaroopumptraining.com.
COVIDIEN, COVIDIEN with logo, Covidien logo and positive results for life are U.S. and internationally registered trademarks of Covidien AG. Other brands are trademarks of a Covidien company. © 2015 Covidien AG or its affiliate. All rights reserved. Ent 227-07-15
Covidien Pty Ltd • 166 Epping Road, Lane Cove NSW 2066 Australia (t) 1800 252 467 Covidien New Zealand Limited • Central Park Corporate Centre, Level 3, Building 5, 666 Great South Road, Penrose, Auckland 1051 New Zealand (t) 0508 489 264
www.covidien.com