Operating Instructions
176 Pages
Preview
Page 1
PDF Compressor Pro OPERATING INSTRUCTIONS
OPERATING TABLE SYSTEM MAGNUS
GA 1180.01 EN 13
PDF Compressor Pro
Copyright notice All rights reserved. Any duplication, adaption or translation without prior written consent is prohibited unless otherwise provided for in the relevant copyright laws. © Copyright MAQUET GmbH & Co. KG Subject to technical modification! Illustrations and technical specifications may vary slightly from those in these Operating Instructions as a result of ongoing product development. V13.04 31-10-2008
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
PDF Compressor Pro Table of contents
1 1.1 1.2 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 1.2.5.1 1.2.5.2 1.3 1.3.1 1.3.2 1.3.3 1.3.3.1 1.3.3.2 1.3.3.3 1.3.3.4 1.3.4 1.3.4.1 1.3.4.2 1.3.4.3 1.3.4.4 1.3.4.5 1.3.4.6 1.3.4.7 1.3.5 1.4 1.4.1 1.4.2 1.4.3 1.4.4 1.4.5 1.5 1.6 1.7 1.7.1 1.7.2 1.7.2.1 1.7.2.2 1.7.3 1.7.3.1 1.7.4 1.7.4.1 1.7.5 1.7.5.1
Introduction Foreword... 1 Environmental protection... 1 Packaging... 1 Rechargeable cells / Batteries... 1 Upholstery... 1 MAQUET products... 1 Disposal... 2 Within the European Trade Area... 2 Outside the European Trade Area... 2 How to use these operating instructions... 2 General... 2 Abbreviations... 2 Symbols... 3 Order number... 3 Cross-references... 3 Actions and responses... 3 Buttons and menus... 3 Definitions... 4 Design of safety notes... 4 Design for other notes... 4 Definition for 3-dimensional coordinate system... 5 Definition for slope and tilt... 5 Definition of permissible overall load... 6 Definition of hazardous location, Zone AP-M... 6 Definition Positioning- / Transportposition... 6 Symbols used... 7 Pictorial guide – Operating table system MAGNUS 1180.01... 9 Pictorial guide – Basic components... 9 Pictorial guide – Columns... 10 Pictorial guide – Table top modules... 11 Pictorial guide – Hand controls... 12 Pictorial guide – Transporters (1180.61XX / 1180.62XX)... 13 Use in accordance with the intended purpose... 14 Applicable standards... 14 Intended purposes... 15 Operating table system MAGNUS 1180.01... 15 Column... 15 Stationary transformer unit (1150.80A0)... 15 Mobile transformer unit (1180.81A0/B0/C0)... 15 Table top... 16 Side rails... 16 Control units... 16 Charging unit / charging station... 16 Transporter... 17 Battery charging station (1009.72A0)... 17
2 2.1 2.2 2.3
Fundamental safety notes Personal safety notes... 18 Safety notes for the product... 22 Safety notes on the use of accessories... 23
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
I
PDF Compressor Pro Table of contents
3 Operation 3.1 Columns... 24 3.1.1 General... 24 3.1.1.1 Motor-powered adjustments... 24 3.1.1.2 IR system code... 24 3.1.1.3 Override control panel... 25 3.1.2 Stationary column (1180.01A0/B0)... 26 3.1.2.1 General... 26 3.1.2.2 Rotate the stationary column... 26 3.1.3 Mobile column (1180.01C0) / independently manoeuvrable column (1180.01D0)... 27 3.1.3.1 General... 27 3.1.3.2 Potential equalisation... 27 3.1.3.3 Optical indicators... 28 3.1.3.4 Switching on the mobile / independently manoeuvrable column... 29 3.1.3.5 Battery operation... 30 3.1.3.6 Charging the rechargeable battery (operation on mains power)... 31 3.1.3.7 Transporting the mobile column... 32 3.1.3.8 Independently manoeuvrable column (1180.01D0)... 33 3.2 Table top modules... 37 3.2.1 General... 37 3.2.1.1 Avoiding collisions... 37 3.2.1.2 Planning surgery... 38 3.2.1.3 Patient positioning... 38 3.2.1.4 Patient orientation... 40 3.2.2 Table width extenders 1001.75A0/76A0... 41 3.2.3 Module mounting points... 42 3.2.3.1 General... 42 3.2.3.2 Basic mounting point... 43 3.2.3.3 Joint mounting point... 44 3.2.3.4 Back plate mounting point... 44 3.2.3.5 Head plate mounting point... 45 3.2.4 Joint module (1180.11X0)... 46 3.2.4.1 Attaching the joint module... 46 3.2.4.2 Removing the joint module... 48 3.2.5 Back plate (1180.31X0)... 49 3.2.5.1 Attaching / removing the back plate... 49 3.2.6 Leg plates, pair (1180.54X0)... 50 3.2.6.1 Attaching / removing the leg plates... 50 3.2.6.2 Abducting the thigh plate... 51 3.2.6.3 Attaching / removing the calf plate... 52 3.2.6.4 Abducting the calf plate... 52 3.2.6.5 Folding down / raising the calf plate... 53 3.2.6.6 Folding down the calf plate from the 90° position... 53 3.2.7 Transfer board (1180.57X0)... 54 3.2.7.1 Attaching / removing the transfer board... 54 3.2.8 Extension plate (1180.32X0)... 55 3.2.8.1 Attaching / removing the extension plate... 55 3.2.9 Head plate (1180.53X0)... 56 3.2.9.1 Attaching / removing the head plate... 56 3.2.9.2 Adjusting the head plate... 57 3.2.10 Padding... 58 3.2.10.1 General... 58 3.2.10.2 PUR padding... 58 3.2.10.3 SFC padding... 59 3.2.11 Side rails... 60 3.3 Control units... 61 instructions MAGNUS 1180.01 II Operating GA 1180.01 EN 13
PDF Compressor Pro Table of contents
3.3.1 General... 61 3.3.2 Attaching the hand control to the side rail... 62 3.3.3 User interface... 63 3.3.3.1 Switch on illumination... 64 3.3.3.2 Selector button [Patient position]... 65 3.3.3.3 Switch over button [Leg side]... 66 3.3.3.4 Adjusting the table top under motor power... 67 3.3.3.5 Aligning the patient horizontally... 68 3.3.3.6 Sloping the patient... 69 3.3.3.7 Lowering / raising the patient (column)... 70 3.3.3.8 Tilting the patient... 71 3.3.3.9 Shifting the patient longitudinally... 72 3.3.3.10 Deactivate the lock function temporarily... 73 3.3.4 Display... 74 3.3.4.1 General... 74 3.3.4.2 Display design... 74 3.3.4.3 Symbols for status bar... 75 3.3.4.4 Symbols for the navigation bar... 75 3.3.4.5 Standard patient positions... 77 3.3.4.6 Menu item [System information]... 78 3.3.4.7 Menu [patient positions]... 79 3.3.4.8 Menu [Transfer]... 82 3.3.4.9 Menu [Settings]... 83 3.3.4.10 Menu [Fast memory]... 86 3.3.5 IR remote control (1180.91A0)... 87 3.3.5.1 General... 87 3.3.5.2 Acoustic signals... 87 3.3.5.3 IR code... 87 3.3.5.4 Transmission power... 87 3.3.6 Charging unit / charging station... 88 3.3.6.1 General... 88 3.3.6.2 Mobile charging unit... 88 3.3.6.3 Stationary charging station... 89 3.3.6.4 Recharging the IR remote control... 90 3.3.6.5 Removing the IR remote control... 90 3.3.7 Corded hand control (1180.90A0)... 91 3.3.7.1 Connecting / unplugging the corded hand control... 91 3.3.8 Foot switch (1009.81G0/G1/G2)... 92 3.4 Transporter (1180.61XX / 1180.62XX)... 93 3.4.1 General... 93 3.4.2 Locking / unlocking the transporter... 93 3.4.3 Potential equalisation... 94 3.4.4 Moving the transporter... 94 3.4.5 Sloping the table top... 95 3.4.6 Sloping the table top manually... 95 3.4.7 Sloping the table top electromotively... 96 3.4.7.1 Connecting / unplugging the corded hand control... 96 3.4.7.2 Sloping the table top... 96 3.4.7.3 Battery charging station (1009.72A0)... 97 3.4.7.4 Replacing the battery... 101 3.4.8 Manually aligning the transporter horizontally... 102 3.4.9 Adjusting the transporter height (1180.62XX)... 103 3.4.10 Selector knob for table top transfer / column transfer... 104 3.4.11 Table top transfer... 105 3.4.11.1 General... 105 3.4.11.2 Table top transfer from transporter to column... 105
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
III
PDF Compressor Pro Table of contents
3.4.11.3 Table top transfer from column to transporter... 107 3.4.11.4 Moving the mobile column... 109 3.5 Explanation of the directions for use labels... 110 3.5.1 Tilt indicator of the operating table (1180.01C0)... 110 3.5.2 Tilt indicator of the operating table (1180.01D0)... 111 3.5.3 Transport / positioning height (1180.01D0)... 112 3.5.4 Extending / retracting the swivel castors of the independently manoeuvrable column (1180.01D0)... 112 3.5.4.1 Release function "Extending swivel castors"... 112 3.5.4.2 No tilting with extended swivel castors... 113 3.5.4.3 No longitudinal shift with extended swivel castors... 113 3.5.5 Locking / unlocking the transporter... 114 3.5.6 Moving the transporter in transverse direction... 114 3.5.7 Aligning the table top horizontally/sloping the table top... 115 3.5.8 Adjusting the height of the transporter... 115 3.5.9 Switch button for "table top transfer / column transport"... 116 3.5.10 Aligning the table top horizontally... 116 4 4.1 4.2 4.2.1 4.3 4.3.1 4.3.2 4.3.3 4.3.4
Patient positioning General... 117 Positioning a patient (250 kg - 380 kg)... 117 Table top configuration for a total load (250 kg - 380 kg)... 119 Special patient positions (250 kg - 320 kg)... 120 General... 120 Laparoscopic adiposity surgery position standing, with abducted leg plates... 120 Laparoscopic adiposity surgery position sitting (Variant I)... 121 Laparoscopic adiposity surgery position sitting (VariationII)... 122
5 5.1 5.1.1 5.2 5.3
Status messages General... 123 Design of status messages... 123 Notes on operation / special notes on operation... 123 Warning messages / Error messages... 125
6 6.1 6.2 6.3 6.4 6.5
Cleaning and disinfection Cleaning... 128 Disinfection... 129 Cleaning and manual disinfection of stainless steel surfaces... 130 Cleaning and manual disinfection of padding... 131 Cleaning / Manual disinfection of the mobile charging unit... 131
7 7.1 7.2
Visual and functional inspections, maintenance Visual and functional inspections... 132 Maintenance... 133
8 8.1 8.2 8.3 8.4 8.5
Malfunctions and rectification Operating table... 134 Transporters... 136 Mobile charging unit... 136 Mobile transformer unit... 137 IR remote control... 137
instructions MAGNUS 1180.01 IV Operating GA 1180.01 EN 13
PDF Compressor Pro Table of contents
9 9.1 9.2 9.2.1 9.2.2 9.2.3 9.3 9.3.1 9.3.2 9.3.2.1 9.3.2.2 9.3.2.3 9.3.2.4 9.3.3 9.3.3.1 9.3.4 9.4 9.4.1 9.4.2 9.4.2.1 9.4.3 9.4.3.1 9.4.3.2 9.4.3.3 9.5 9.5.1 9.6 9.6.1 9.7 9.7.1 9.7.2
Technical specifications Ambient conditions... 138 Operating table... 138 Slope and tilt... 138 Height adjustment range... 139 Radiotranslucent area... 140 Table top modules... 142 Dimensions... 142 Ranges of motor-powered adjustments... 143 Basic table top... 143 Joint module... 143 Back plate... 144 Motor-driven adjustment of the leg plate / thigh plate... 144 Ranges of manual adjustments... 145 Calf plate... 145 Weights... 145 Columns... 146 General... 146 Stationary column (1180.01A0/B0)... 146 Stationary transformer unit (1150.80A0)... 147 Mobile / independently manoeuvrable column... 148 Mobile column (1180.01C0)... 148 Independently manoeuvrable column (1180.01D0)... 148 Mobile transformer unit (1180.81A0/B0/C0)... 148 Mobile charging unit (1009.70A0)... 149 Electrical specifications... 149 Stationary charging unit (1009.71A0)... 149 Electrical specifications... 149 Transporter (1180.61XX/62XX)... 150 Dimensions... 150 Weight... 151
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
V
PDF Compressor Pro Table of contents
10 Accessories and spare parts which can be used 10.1 Table top modules... 152 10.1.1 Table top modules, overall load up to 380 kg... 152 10.1.1.1 Table top modules with basic interface... 152 10.1.1.2 Table top modules with joint mounting point... 152 10.1.1.3 Table top modules with back plate interface... 153 10.1.1.4 Table top modules with head plate interface... 153 10.1.2 Table top modules, overall load up to 380 kg... 153 10.1.2.1 Table top modules with basic mounting point... 153 10.1.2.2 Table top modules with joint mounting point... 153 10.1.2.3 Table top modules with back plate interface... 154 10.1.2.4 Table top modules with head plate interface... 154 10.1.3 Table top modules, overall load up to 180 kg... 155 10.1.3.1 Table top modules with joint mounting point... 155 10.2 Accessories – Control units... 155 10.3 Accessories Transporters... 156 10.3.1 Table top modules, overall load up to 380 kg... 156 10.3.2 Table top modules, overall load up to 250 kg... 156 10.4 Accessories for side rails... 156 10.4.1 General... 156 10.4.2 Table top modules, total load up to 380 kg... 156 10.4.3 List of accessories... 157 10.5 Special-purpose accessories... 158 10.6 Spare parts... 159
instructions MAGNUS 1180.01 VI Operating GA 1180.01 EN 13
PDF Compressor Pro Introduction Foreword
1
Introduction
1.1
Foreword Your facility has selected the leading-edge medical technology made by MAQUET. We sincerely appreciate the trust you have placed in us. MAQUET is a member of the GETINGE group which is consistently directing its attention to pioneering medico-technical solutions.
1.2
Environmental protection
1.2.1
Packaging
1
MAQUET is one of the world’s leading suppliers for emergency rooms, operating rooms and intensive care units. MAQUET has been standing for innovation and advance in medical technology ever since it was founded in 1838. Solutions relevant to the needs of practice and customer-oriented services optimize working cycles and boost economy in hospitals – all to the benefit of the patient.
The packaging is made of materials compatible with the environment. MAQUET will dispose of the packaging materials upon request. 1.2.2
Rechargeable cells / Batteries These can be turned in to your local disposal system for proper handling.
1.2.3
Upholstery Upholstery can be disposed of as normal household wastes.
1.2.4
MAQUET products MAQUET will take back used products or those which are no longer in service. Please contact your MAQUET factory representative for more detailed information.
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
1
PDF Compressor Pro
1
Introduction How to use these operating instructions
1.2.5
Disposal
1.2.5.1
Within the European Trade Area This product is governed by the 2002/96/EC Directive (Directive on Waste Electrical and Electronic Equipment). This product has not been registered for use in private households; disposal using municipal
1.2.5.2
collection points for used electrical equipment is not authorized. Please contact your MAQUET factory representative for more detailed information on correct and legal disposal.
Outside the European Trade Area When disposing of this product, be sure to comply with the applicable national regulations on the treatment and disposal of used equipment.
1.3
How to use these operating instructions
1.3.1
General These operating instructions are provided to familiarize you with the features of this MAQUET product. They are subdivided into several chapters.
1.3.2
Please note: • Please read these operating instructions carefully and completely before using the product for the first time. • Always proceed in accordance with the information provided in these operating instructions. • Store these operating instructions in a location near the product.
Abbreviations EC EMC EN IR INT IPS OP table PUR SELV SFC VDE
European Community Electromagnetic compatibility European standard Infrared (remote control) Intermittent Internal Power Source Operating table Polyurethane integral foam Safety Extra Low Voltage Special Foam Core Verband der Elektrotechnik Elektronik Informationstechnik (Association for Electrical, Electronic & Information Technologies)
instructions MAGNUS 1180.01 2 Operating GA 1180.01 EN 13
PDF Compressor Pro Introduction How to use these operating instructions
1.3.3
Symbols
1.3.3.1
Order number
1
An "X" in the order number (e.g. 1122.33X4) is a placeholder for a number of variants. 1.3.3.2
Cross-references References to other pages in these Operating Instructions are identified with a double arrow symbol ":".
1.3.3.3
1.3.3.4
Actions and responses
The "⌧" symbol identifies an action taken by the user while the " " symbol identifies the reaction which this will induce in the system.
Example: ⌧ Turn on the light switch. Lamp lights up.
Buttons and menus Buttons and menus are enclosed in square brackets. Example: ⌧ Press the [DOWN] button in the [Operation] menu.
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
3
PDF Compressor Pro
1
Introduction How to use these operating instructions
1.3.4
Definitions
1.3.4.1
Design of safety notes Pictogram
Descriptor
Text
DANGER!
Indicates a direct and immediate risk The text for the safety to persons, which may be fatal or re- note describes the type sult in most serious injury. of risk and how to avert it.
WARNING!
Indicates a potential risk to persons or property which may result in health hazard or grave property damage.
CAUTION!
Indicates a potential risk to property which may result in property damage.
Fig. 1: Design of safety notes
1.3.4.2
Design for other notes Notes not referring to personal injury or property damage are used as follows: Pictogram
Descriptor
Reference to
NOTE
Supplementary assistance or further useful information.
ENVIRONMENT
Proper disposal.
Fig. 2: Design for other notes
instructions MAGNUS 1180.01 4 Operating GA 1180.01 EN 13
PDF Compressor Pro Introduction How to use these operating instructions
1.3.4.3
1
Definition for 3-dimensional coordinate system Reference
X axis
Y axis
Z axis
Product
Longitudinal direction
Lateral direction
Height
Patient
Longitudinal
Transverse
Sagittal
Neutral
Horizontal
Horizontal
Vertical
Fig. 3: Definition of terms for the 3-dimensional coordinate system 1 Frontal plane (horizontal plane) 2 Sagittal plane
1.3.4.4
3 Transverse plane
Definition for slope and tilt
Fig. 4: Definition for slope and tilt 1 Reverse Trendelenburg (foot down) 2 Trendelenburg (head down)
3 Tilt 4 Slope
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
5
PDF Compressor Pro
1
Introduction How to use these operating instructions
1.3.4.5
Definition of permissible overall load The "permissible overall load" is calculated by adding the weight of the patient and the weight of accessories on the side rails. The "permissible overall load" is the load which can be placed on the table top.
1.3.4.6
Restrictions might result from the components table top and transporter for which other overall loads may be valid, or from special patient positions.
Definition of hazardous location, Zone AP-M
NOTE The medical environment is designated as "Zone AP-M" (1).
1
Fig. 5: Hazardous location, Zone AP-M
1.3.4.7
Definition Positioning- / Transportposition For moving the independently manoeuvrable operating table (1180.01D0), differentiation is made between moving it with and without patient. Positioning position Moving the independently manoeuvrable operating table with patient is only permitted within the operating theatre under the following conditions. The independently manoeuvrable operating table must be in the positioning position, i.e. lateral tilt and longitudinal shift are reset and the table top height is restricted. The independently manoeuvrable operating table is not approved for patient transfer.
instructions MAGNUS 1180.01 6 Operating GA 1180.01 EN 13
Transport position Moving the independently manoeuvrable operating table without patient is only permitted within the hospital under the following conditions. The independently manoeuvrable operating table must be in the transport position, i.e. lateral tilt, slope, motor-powered leg plate adjustment and longitudinal shift are reset and the table top height is restricted.
PDF Compressor Pro Introduction How to use these operating instructions
1.3.5
1
Symbols used Symbols
Identification Labelling for Class I products, developed and marketed in compliance with Medical Device Directive 93/42/EEC.
Labelling for devices incorporating a Type B applied part as defined in the IEC 60601-1 standard. Degree of protection against electric shock. Labelling in compliance with the IEC 60601-1 standard. Symbol for "Class II".
Labelling of Category AP equipment as per the IEC 60601-1 standard. Explosion protection by avoiding sources of ignition when using flammable blends of anaesthetics which are mixed with air, oxygen or nitrous oxide. Labelling as per IEC 60529 standard. Symbol for "splash protection".
Identification in accordance with standard IEC 60529. Symbol for "protection against touching components under tension (larger than 1 mm diameter)" and "protection against vertically falling drip water". Identification in accordance with standard IEC 60529. Symbol für "unspecified protection".
Internal Power Source
Labelling for intermittent operation, i. e., if the product is continuously operated for time "x", the product may not then be operated for time"y". e. g. int 10 / 20 means that the product may not be used/moved/dismantled for 20 minutes after 10 minutes of uninterrupted use/movement. Labelling in compliance with the IEC 60601-1 standard. Symbol for "Potential equalization".
Labelling in compliance with the EN 980 standard. Symbol for "Serial number".
Fig. 6: Symbols (Part 1 of 2)
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
7
PDF Compressor Pro
1
Introduction How to use these operating instructions
Symbols
Identification Labelling in compliance with the EN 980 standard. Symbol for "Manufacturing date".
Labelling in compliance with the IEC 60601-1 standard. Symbol for "Observe the accompanying documents".
Labelling as per the 2002/96/EC Directive (Directive on Waste Electrical and Electronic Equipment). Symbol for "Do not dispose of at the municipal collection points for used electrical equipment". Packaging label. Symbol for "Keep dry".
Packaging label. Symbol for "Fragile! Handle with care".
Packaging label. Symbol for "Top".
Transportation label. Symbol for "Temperature limitations".
Transportation label. Symbol for "Relative humidity".
Transportation label. Symbol for "Atmospheric pressure".
Cleaning Label. Symbol for "Do not splash with water".
Fig. 6: Symbols (Part 2 of 2)
instructions MAGNUS 1180.01 8 Operating GA 1180.01 EN 13
PDF Compressor Pro Introduction Pictorial guide – Operating table system MAGNUS 1180.01
1.4
Pictorial guide – Operating table system MAGNUS 1180.01
1.4.1
Pictorial guide – Basic components
2
1
1
8
5 7
2 2 2
3 5
9
4 6 10 11
12
Fig. 7: Pictorial guide – Basic components for MAGNUS 1180.01 1 Basic table top (1180.10X0) 2 Mount at the basic mounting point 3 Mark at the basic table top (Patient orientation) 4 Basic joint 5 Socket for control units at the basic supporting arm
6 Column 7 Slope saddle 8 Table top mount 9 Socket for control units at the column 10 IR receiver and transmitter 11 Override control panel 12 Transporter
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
9
PDF Compressor Pro
1 1.4.2
Introduction Pictorial guide – Operating table system MAGNUS 1180.01
Pictorial guide – Columns
4
1
6 7 8
3
2
2
5 9
10
11
13
12
Fig. 8: Pictorial guide – Columns 1 Stationary column (1180.01A0) 2 Locking lever (rotate column) 3 Built-in base plate 4 Stationary column (1180.01B0) 5 Floor standing base plate 6 Mobile column (1180.01C0) 7 Indicator for battery charge level and recharging
instructions MAGNUS 1180.01 10 Operating GA 1180.01 EN 13
8 Connection for potential equalisation cable 9 Socket for mobile transformer unit 10 Independently manoeuvrable column (1180.01D0) 11 Pump pedal 12 Castor cover 13 Mobile transformer unit (1180.81X0) for column 1180.01C0/D0
PDF Compressor Pro Introduction Pictorial guide – Operating table system MAGNUS 1180.01
1.4.3
1
Pictorial guide – Table top modules
8
1
12
9
2
15
13
11 2 11 6
5
13
9
7
14 10
4
20
18 19
4
5
31 6
3
4
17
20
14
6
16
2
24 25
21
6
23 30 3
29 30 4 32
26 29
22
28 4
27
2
5 4
7
33 34
Fig. 9: Pictorial guide – Table top modules 1 Joint module (1180.11A0) 2 Mount at the joint module mounting point 3 Left joint module supporting arm 4 Side rail 5 Release button 6 Basic mounting point 7 Right joint module supporting arm 8 Back plate (1180.31X0) 9 Mount at the back plate mounting point 10 Release lever 11 Joint mounting point 12 Extension plate (1180.32X0) 13 Mount at the head plate mounting point 14 Back plate mounting point 15 Head plate (1180.53X0) 16 Clamp lever 17 Side rail
18 Offset lever 19 Bore hole for locking mechanism 20 Head plate mounting point 21 Leg plate (1180.54X0): Calf plate 22 Eccentric lever, abducting the calf plate 23 Calf plate mounting point 24 Leg plate (1180.54X0): Thigh plate 25 Joint mounting point 26 Release button 27 Eccentric lever, abducting the thigh plate 28 Release lever 29 Eccentric lever, sloping the calf plate 30 Mount at the: calf plate mounting point 31 Joint module (1180.11B0) with gynaecology cut-out 32 Transfer board (1180.57X0) 33 Release lever 34 Joint mounting point
Operating instructions MAGNUS 1180.01 GA 1180.01 EN 13
11
PDF Compressor Pro
1 1.4.4
Introduction Pictorial guide – Operating table system MAGNUS 1180.01
Pictorial guide – Hand controls
1
2
3 4 9
8 7 6
5
10
Fig. 10: Pictorial guide – Hand controls 1 Mobile charging unit (1009.70A0) for IR remote control (1180.91A0) 2 Stationary charging station (1009.71A0/B0) for IR remote control (1180.91A0) 3 IR remote control (1180.91A0) 4 Corded hand control (1180.90A0)
instructions MAGNUS 1180.01 12 Operating GA 1180.01 EN 13
5 Plug 6 Plug adapter: Great Britain 7 Plug adapter: USA / Japan 8 Plug adapter: Europe 9 Power unit with plug 10 Foot switch (1009.81G0/G1/G2)