Mathys Orthopaedic Instruments Assembly / Disassembly and Operational Check Guide

Content

A

Assembly / Disassembly

• Knee instruments • Hip instruments • Shoulder instruments • Finger instruments

B

Operational check

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys basic instruments

Intramedullary tibial aiming device 71.02.3041 Intramedullary tibial rod 71.02.3042 Foot holder for tibial aiming device 71.02.3034 Silicone band 71.02.1005 Setscrew for fork 77.02.0043 Shackle for foot holder 71.02.3035 Fork for foot holder 71.02.3036 Tibial cutting block 71.02.4018 Hand screw 77.02.0019 Spring screw for foot holder 77.02.0041 Extramedullary tibial aiming device 71.02.3032

1 2

ASSEMBLY: Insert the fork in the foot holder and tighten the screw. Telescope the shackle and the fork for foot holder. Screw-on the setscrew for fork. Fig. 1c–1a Insert the tibial cutting block in the extramedullary aiming device. Telescope the extramedullary tibial aiming device and the the intramedullary one and tighten the hand screw. Fig. 2c–2a 1a

Telescope the two parts and fix them with the spring screw for foot holder. DISASSEMBLY: Unscrew the spring screw. Extricate the foot holder from the extramedullary tibial aiming device. Now the instrument consists of two parts. Unscrew the hand screw and separate the extramedullary tibial aiming device from the intramedullary one. Remove the tibial cutting block from the aiming device. Fig. 2a–2c

1b

Hold the shackle and the fork and unscrew the setscrew. Remove the shackle from the fork. Unscrew the screw of the foot holder and detach the fork. Fig. 1a–1c

1c

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.1

A

2a

2b

Knee instruments / balanSys basic instruments

Intramedullary tibial aiming device 71.02.3041 Intramedullary tibial rod 71.02.3042 Foot holder for tibial aiming device 71.02.3034 Silicone band 71.02.1005 Setscrew for fork 77.02.0043 Shackle for foot holder 71.02.3035 Fork for foot holder 71.02.3036 Tibial cutting block 71.02.4018 Hand screw 77.02.0019 Spring screw for foot holder 77.02.0041 Extramedullary tibial aiming device 71.02.3032

2c

Handle for intramedullary tibial rod 71.02.3043 ASSEMBLY: Push the cone in the sleeve and engage it. DISASSEMBLY: Press the cone out of the sleeve. NOTE: Follow the directions on the surface of the sleeve.

A 1.2

Mathys Ltd Bettlach • Robert Mathys Strase 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys basic instruments

Alignment rod tube, short 70.04.0110 Alignment rod tube, long 70.04.0111 Alignment rod 70.04.0109 ASSEMBLY: Telescope the alignment rod and the alignment rod tube. DISASSEMBLY: Remove the alignment rod from the tube. NOTE: Carry out the insertion and removal in a horizontal position to avoid damaging the instruments.

Guide for trochlear reamer 71.02.3024 Trochlear reamer 71.02.3023 ASSEMBLY: Pull the reamer from the guide. DISASSEMBLY: Push the reamer in the guide. NOTE: Do not drop the reamer.

Intramedullary rod 71.02.2106 Handle for intramedullary rod 71.02.2110 ASSEMBLY: Push the rod in the handle. DISASSEMBLY: Pull the rod from the handle.

Mathys Ltd Bettlach • Robert Mathys Strase 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.3

A

Knee instruments / balanSys basic instruments

Spacer-block insert 71.02.1018 Spacer-block base plate 71.02.1017 ASSEMBLY: Attach the insert to the base plate. DISASSEMBLY: Detach the insert from the base plate.

A 1.4

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys standard instruments

Intramedullary rod 71.02.2104 Handle for tibial sizers 71.02.1030 Glider for F2 angle guide 71.02.3058 Angle guide F2 71.02.3050 ASSEMBLY: Attach the glider to the angle guide. Attach the handle for tibial sizers to the glider. Insert the intramedullary rod in the angle guide. DISASSEMBLY: Detach the handle for tibial sizers. Remove the intramedullary rod from the angle guide.

Stylus 3°, left 71.02.3052 Stylus 3°, right 71.02.3053 Dorsal cutting block, 1.3mm 71.02.2131 Ventral cutting block F1, 1.3mm 71.02.2130 ASSEMBLY: Press the spring button. Attach the dorsal cutting block to the ventral one. Attach the stylus. DISASSEMBLY: Remove the stylus. Press the spring button. Detach the dorsal cutting block from the ventral one.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.5

A

Knee instruments / balanSys patella

Patella cementing clamp 71.02.3067 ASSEMBLY: Screw in the screw. Attach the clamp protection. DISASSEMBLY: Detach the clamp protection. Unscrew the screw.

A 1.6

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys trial prostheses

Tibial cutting punch 71.02.1032 Handle with thread 71.02.3013 ASSEMBLY: Screw the cutting punch to the handle. DISASSEMBLY: Unscrew the cutting punch from the handle. NOTE: The cutting punch has sharp edges.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.7

A

Knee instruments / balanSys UNI

1

Silicone band 71.02.1005 Fork for foot holder 77.02.0044 Setscrew for fork 77.02.0043 T-bolt for foot holder 77.02.0042 Foot holder 77.02.0002 Tibial aiming device 77.02.0001 Spring screw for foot holder 77.02.0041 Tuberosity bearing 77.02.0004 LM/RL Tuberosity bearing 77.02.0003 LL/RM Tibial cutting guide 77.02.0005 Hand screw 77.02.0019 ASSEMBLY: Hold the tuberosity bearing, LM/RL or LL/RM as required, and the tibial aiming device. Screw on the hand screw. Fig. 5 & 6

2

Insert the T-bolt for foot holder into the foot holder. Tighten the screw for foot holder. Attach the fork to the T-bolt and keep them together. Screw on the setscrew. Fig. 3 & 4 Telescope the two parts and fix them together with the spring screw for foot holder. Fig. 1 & 2 DISASSEMBLY: Unscrew the spring screw for foot holder. Fig. 1 & 2

3

Hold the foot holder and the T-bolt. Unscrew the setscrew for fork. Remove the foot holder. Unscrew the screw for foot holder. Remove the T-bolt. Fig. 3 & 4 Hold the tuberosity bearing and the tibial aiming device. Remove the hand screw. Fig. 5 & 6 NOTE: We mention the tibial cutting guide for the sake of completeness.

4

5

6

A 1.8

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys UNI

Femoral drill guide 77.02.0010 Ligament tensor 77.02.0006 ASSEMBLY: Insert the drill guide. DISASSEMBLY: Remove the drill guide. The ligament tensor cannot be dismantled further.

Alignment rod 70.04.0109 Alignment rod tube, short 70.04.0110 Alignment rod tube, long 70.04.0111 ASSEMBLY: Telescope the rod and the tube. DISASSEMBLY: Telescope the rod from the tube.

Mobile trial tibial metal back, size 1, LM RL 77.02.0066 Handle for trial prostheses 77.02.0030 ASSEMBLY: Open the scissors of the handle. Attach the mobile trial tibial metal back. Close the scissors. DISASSEMBLY: Open the scissors of the handle. Remove the mobile trial tibial metal back.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.9

A

Knee instruments / balanSys 4in1

Drill guide for distal femoral cutting block 71.02.3071 Intramedullary rod 71.02.2104 Glider for F2 angle guide 4-in-1 block 71.02.3072 Angle guide to F2 71.02.3050 ASSEMBLY: Insert the glider into the F2 angle guide. Press the lever of the drill guide and attach the drill guide to the glider. DISASSEMBLY: Press the lever of the drill guide and remove the drill guide from the glider. Remove the glider from the angle guide. NOTE: We mention the intramedullary rod for the sake of completeness.

Screw for distal cutting block 71.02.4011 Distal cutting block, 1.3mm 71.02.4017 ASSEMBLY: Screw in the screw. DISASSEMBLY: Unscrew the screw.

A 1.10

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys 4in1 soft tissue-orientated

Distal cutting block, 1.3mm 71.02.4017 Screw for distal cutting block 71.02.4011 ASSEMBLY: Screw the screw in the distal cutting block. DISASSEMBLY: Unscrew the screw from the distal cutting block.

Angle guide 71.02.4010 Intramedullary rod 71.02.2104 ASSEMBLY: Telescope the rod and the angle guide. DISASSEMBLY: Remove the rod from the angle guide.

Drill guide, one-piece 71.02.4015 Femoral guide 71.02.4016 ASSEMBLY: Telescope the femoral guide and the drill guide. DISASSEMBLY: Remove the femoral guide from the drill guide.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.11

A

Knee instruments / balanSys 4in1 soft tissue-orientated

Ligament tensor 71.02.3018 PE height adjustment 71.02.4013 Drill guide 71.02.4014 ASSEMBLY: Telescope the height adjustment and the drill guide. Attach the height adjustment and the drill guide to the ligament tensor. DISASSEMBLY: Remove the height adjustment and the drill guide from the ligament tensor and dismantle the latter.

A 1.12

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Knee instruments / balanSys PS

Handle for tibial cutting chisel 71.02.3013 Fin chisel 64–85 79.02.0280 ASSEMBLY: Screw the fin chisel onto the handle. DISASSEMBLY: Unscrew the fin chisel from the handle. NOTE: The tibia-cutting chisel has sharp edges.

Reamer 79.02.0281 Machine coupling for reamer 79.02.0021 ASSEMBLY: Fit the reamer onto the adapter. Pull the coupling in the direction of the reamer in order to connect the cutter. DISASSEMBLY: Pull the coupling in the direction of the reamer. Remove the adapter for the reamer carefuly.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 1.13

A

Hip instruments / hip heads / bipolar

Cup impactor, curved 3.14.547 Combination bolt 54.02.4101 ASSEMBLY: Screw the combination bolt on the cup impactor. DISASSEMBLY: Unscrew the combined bolt from the cup impactor.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A 2.1

A

Hip instruments / cups / CCB

Flexible shaft 3.14.545 T-handle with quick coupling 3.40.502 Tap, 3.5mm 3.14.253 ASSEMBLY: Insert the flexible shaft in the T-handle. Insert the tap in the flexible shaft. DISASSEMBLY: Remove the tap from the flexible shaft. Remove the flexible shaft from the T-handle.

Flexible shaft 3.14.545 Drill bit, 3.1mm OD 3.14.254 ASSEMBLY: Insert the drill bit in the flexible shaft. DISASSEMBLY: Remove the drill bit from the flexible shaft.

Drill bit for anchoring holes 3.14.299 Coupling for AO-ASIF air machine 3.40.535 ASSEMBLY: Put the plastic envelope over the drill bit. Insert the drill bit in the coupling. DISASSEMBLY: Remove the coupling and the plastic envelope from the drill bit.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com A 2.2.1

A

Hip instruments / cups / CCN

Shaft for acetabular reamer 3.14.556 Acetabular reamer 3.14.266 ASSEMBLY: Put the plastic envelope over the shaft. Attach the acetabular reamer to the shaft. DISASSEMBLY: Remove the acetabular reamer and the plastic envelope from the shaft.

CCN Cup impactor 55.02.4001 CCN Trial cup 55.02.0540–55.02.0560 ASSEMBLY: Screw the appropriate trial cup on the cup impactor. DISASSEMBLY: Unscrew the trial cup from the cup impactor.

A 2.2.2

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com

A

Hip instruments / cups / CCN

CCN Cup impactor 55.02.4001 CCN Impactor top 55.02.4022 ASSEMBLY: Screw the impactor top on the cup impactor. DISASSEMBLY: Unscrew the impactor top from the cup impactor.

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com A 2.2.3

A

Hip instruments / cups / expanSys

1

Coupling handle 55.02.4205 Seating heads 55.02.0310–55.02.0314 Centring heads 55.02.0316–55.02.0319

2

ASSEMBLY: Screw the appropriate seating head on the coupling handle. Attach the corresponding centring head to the seating head. DISASSEMBLY: Detach the centring head from the seating head. Unscrew the seating head from the coupling head.

1

2

Handle with gripping head 55.02.0521–55.02.0522 Rod with impact plate 55.02.0532 Centring heads 55.02.0316–55.02.0319 ASSEMBLY: Insert the rod with impact plate in the handle with gripping head until it engages. Attach the corresponding centring head. DISASSEMBLY: Detach the centring head. Activate the disengaging button on the handle and pull out the rod with impact plate.

Coupling handle 55.02.4205 Shell expanders 55.02.4346–55.02.4370 ASSEMBLY: Screw the appropriate shell expander on the coupling handle. DISASSEMBLY: Unscrew the shell expander and remove it from the coupling handle.

A 2.2.4

Mathys Ltd Bettlach • Robert Mathys Strasse 5 • P. O. Box • 2544 Bettlach • Switzerland • www.mathysmedical.com