Scope Buddy SB-110-HU1003 Quick Guide Rev B

SB-110-HU1003 24 HOUR DISPOSABLE TUBING CONNECTION GUIDE For MEDIVATORS® DSD Endoscopes READ ALL INSTRUCTIONS PRIOR TO CONNECTION

Using Medivators™ SCOPE BUDDY® Flushing Aid

SCOPE BUDDY FLUSHING AID CONNECTION DIAGRAM SCOPE BUDDY Flushing Aid

Outlet Port SCOPE BUDDY Adapter for Disposable Tubing - Male SCOPE BUDDY Disposable Tubing Delivery Tube Inlet Port SCOPE BUDDY Adapter for Disposable Tubing - Female

CONNECTION INSTRUCTIONS SCOPE BUDDY™ Adapter for Disposable Tubing - Female Align the female adapter coupling to the “IN” port on the SCOPE BUDDY Flushing Aid and push on until it snaps into place. This adapter is reusable (does not need to be discarded daily) and is sold separately, order number: SB-110-HU1005. SCOPE BUDDY Adapter for Disposable Tubing - Male Align the male adapter coupling to the “OUT” port on the SCOPE BUDDY Flushing Aid and push on until it snaps into place. This adapter is reusable (does not need to be discarded daily) and is sold separately, order number: SB-110-HU1005. SCOPE BUDDY Disposable Connector for use with MEDIVATORS DSD Hookup Align the male luer on the Delivery Tube with the female Luer on the SCOPE BUDDY Adapter for Disposable Tubing and screw clockwise until fully engaged. Align the female adapter coupling to the male adapter coupling on the appropriate MEDIVATORS DSD Hookup. Push on until it snaps into place. Refer to the corresponding MEDIVATORS DSD Hookup connection guide for specific instruction on connection to endoscope channels.

Fluid Intake Line

The SCOPE BUDDY Delivery Tubing is for 24 hour use and sold under order number SB-110-HU003. Discard Daily.

NOTE: Refer to Scope Buddy Flushing Aid User Manual for operating instructions.

Fluid Intake Line Align the female luer on the Uptake Tube with the male Luer on the SCOPE BUDDY Adapter for Disposable Tubing and screw clockwise until fully engaged. This tubing is for 24 hour use. Discard daily.

FLUSHING TIMES FOR 24 HOUR SCOPE BUDDY DISPOSABLE TUBING

WARNINGS & CAUTIONS Failure to verify fluid flow through the endoscope may result in an endoscope which is not properly flushed or cleaned. Always verify all channel connections and if fluid is exiting all endoscope ports including the distal end. For 24 hour use only. Do not reprocess and discard daily. Read all instructions prior to use. Failure to follow these may result in inadequate flushing of endoscopes. Refer to SCOPE BUDDY Flushing Aid User Manual for additional instructions. Install all necessary waterproof caps, plugs and cleaning adapters to endoscope prior to immersion. Users operating a MEDIVATORS SCOPE BUDDY Flushing Aid and MEDIVATORS SCOPE BUDDY Disposable Tubing must be trained and competent in the understanding of endoscope channel systems.

When using the SCOPE BUDDY Flushing Aid and 24 Hour SCOPE BUDDY Disposable Tubing, all endoscopes should be flushed using a programmed time of 60 seconds only.

SCOPE BUDDY® and MEDIVATORS® is a registered trademarks and trademarks of MEDIVATORS Inc.

If you have any questions regarding SCOPE BUDDY 24 Hour Disposable Tubing connections, in the U.S., please contact Medivators Technical Support at 1-800-444-4729. Outside the U.S., please contact your Medivators Distributor. 2