Continuum Infusion System Operation Overview Rev C

Continuum MR Compatible Infusion System Operation Overview: Continuous Rate Over Volume 1 Connect the proximal end of the Medrad primary IV line to the distal end of the existing patient IV line.

3 Turn on the Continuum pump by pressing and holding the On/Off key. Wait for the “Self Test” screen to appear then press and hold the Stop/No key for 5 seconds to access the “Select Program” screen. Using the keys, scroll to “Continuous” and confirm by pressing the Start/Ok key. To Prime the line press the Prime/Bolus key.

Proximal Start/OK

2 Open the door of the

Stop/No

Continuum pump 1

2

4

5

3

START OK

STOP NO

PRIME BOLUS

ON OFF

6

7

8

9

.

0

Info

On/Off

and insert the Medrad IV line into the pump by placing the key into the keyway, then close the pump door.

Prime/Bolus

4 After priming, enter the Rate in ml/hr and then press the Start/OK 1

2

3

4

5

6

7

8

9

.

0

Info

START OK

STOP NO

PRIME BOLUS

ON OFF

key to confirm. (press Stop/No to backspace).

5 Enter the Volume in ml and then press the Start/OK key to confirm Keyway

and to start the infusion. (Press Stop/No to backspace).

NOTE: Press the orange key to program and administer a Bolus (in ml) during infusion. Key

Refer to Operation Manual for complete instructions on how to safely operate the Continuum MR Compatible Infusion System. 202424 Rev. C

Continuum MR Compatible Infusion System Operation Overview: Dose and Non Weight Dose Programs 1 Connect the proximal end of the Medrad primary IV line to the

3 Turn on the Continuum pump by pressing and holding the On/Off key. Wait for the “Self Test” screen to appear then press and hold the Stop/No key for 5 seconds to access the “Select Program” screen. Using the keys, scroll to either “Dose” or “Non Weight Dose” and confirm by pressing the Start/Ok key. To Prime the line press the Prime/Bolus key.

distal end of the existing patient IV line.

Proximal

Start/OK

Stop/No

2 Open the door of the Continuum pump

1

2

4

5

3

START OK

STOP NO

PRIME BOLUS

ON OFF

6

7

8

9

.

0

Info

On/Off

Prime/Bolus

and insert the Medrad IV line into the pump by placing the key into the keyway, then close the pump door.

4 After priming enter the following parameters:

1

2

3

4

5

6

7

8

9

.

0

Info

START OK

STOP NO

PRIME BOLUS

ON OFF

Dose: Non Weight Dose: Patient Weight (kg) Concentration (mg/ml or U/ml) Concentration (mg/ml or U/ml) Dose (x/min or hr) Dose (x/kg/min or hr) Volume (ml) Volume (ml)

5 Confirm infusion parameters and then press the Start/OK key to Keyway

confirm and to start the infusion. (press Stop/No to backspace).

NOTE: Press the orange key to program and administer a Bolus (in ml) during infusion. Refer to Operation Manual for complete instructions on how to safely operate the Continuum MR Compatible Infusion System.