StealthStation FlexENT Customer Repair Manual Rev B

StealthStation FlexENT™ Customer Repair Manual

9736349EN D00447579, Rev. B 2023-04

Copyright © 2023 Medtronic Navigation, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Medtronic Navigation, Inc. The information contained in this document is accurate at time of publication. Medtronic Navigation, Inc. reserves the right to revise this documentation and to make any changes in content from time to time without obligation on the part of Medtronic Navigation, Inc. to provide notification of such revision or change. Medtronic Navigation, Inc. provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. Medtronic Navigation, Inc. may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. O-arm™, StealthStation™ S7 and StealthStation™ S8, and StealthStation FlexENT™ are registered trademarks of Medtronic Navigation, Inc. All other product or service names are the property of their respective owners. Refer to manuals.medtronic.com for the current version of this manual.

Table of Contents Replacement Part Numbers

6

Accessory Power Cable

10

Bifurcated Cable

16

Desk Stand

24

Dual Monitor Mount

30

External Power Cable

36

Flat Emitter Bin

42

IPC Nexus Mount

46

IV Bracket

50

Lower Shelf with Bin

52

Power Strip

56

Push Handle

60

Shelf

64

Shelf with Rails

68

Side Emitter Mount

72

Tap Strip

78

Cable diagram

82

9736349EN | D00447579, Rev. B

4 of 83

Replacement Part Numbers

9736349EN | D00447579, Rev. B

6 of 83

Replacement Part Numbers

9736349EN | D00447579, Rev. B

7 of 83

Replacement Part Numbers

9736349EN | D00447579, Rev. B

8 of 83

Accessory Power Cable

Warning: Do not modify this equipment, including system, hardware, or accessories, without authorization of the manufacturer.

Follow proper shutdown procedure before performing service on the cart.

Caution: Always order replacement parts from Medtronic. Only Medtronic replacements have been tested with the system and can be guaranteed to perform as expected. To order replacement parts, contact Medtronic technical support.

Caution: Removing power from the StealthStation FlexENT™ system before it has been properly shut down can corrupt the system's software causing loss of data and functionality. Do not remove power from the system until the unit has been properly shut down.

Power down and disconnect the accessory.

9736349EN | D00447579, Rev. B

10 of 83

Accessory Power Cable

9736349EN | D00447579, Rev. B

11 of 83

Accessory Power Cable

Disconnect all accessory cables from the power strip. Remove the replacement part from the shipping container. Inspect the part for damage. Contact Medtronic technical services if the part is damaged or incomplete.

Refer to the "Cable diagram" on page 82 to check cable connections. Caution: Cables must be connected as shown in the "Cable diagram" on page 82. Incorrect cable connections can cause unexpected equipment performance. Contact Medtronic Technical Service for additional information.

9736349EN | D00447579, Rev. B

12 of 83

Accessory Power Cable

Make sure that the circuit breaker is on. I = On O = Off

Connect the accessory power cable to the appropriate accessory on the cart.

9736349EN | D00447579, Rev. B

13 of 83

Accessory Power Cable

Power on the All-in-One computer and all accessories. Make sure that all systems function as expected. Verify that the accessory with the new power cable functions as expected.

9736349EN | D00447579, Rev. B

14 of 83

Bifurcated Cable

9736318-100-200V 9736319-220-230V

Warning: Do not modify this equipment, including system, hardware, or accessories, without authorization of the manufacturer.

Follow proper shutdown procedure before performing service on the cart.

Caution: Always order replacement parts from Medtronic. Only Medtronic replacements have been tested with the system and can be guaranteed to perform as expected. To order replacement parts, contact Medtronic technical support.

Caution: Removing power from the StealthStation FlexENT™ system before it has been properly shut down can corrupt the system's software causing loss of data and functionality. Do not remove power from the system until the unit has been properly shut down.

9736349EN | D00447579, Rev. B

16 of 83

Bifurcated Cable

Retain hardware for installation.

9736349EN | D00447579, Rev. B

17 of 83

Bifurcated Cable

9736349EN | D00447579, Rev. B

18 of 83

Bifurcated Cable

Remove the replacement part from the shipping container. Inspect the part for damage. Contact Medtronic technical services if the part is damaged or incomplete.

9736349EN | D00447579, Rev. B

19 of 83

Bifurcated Cable

9736349EN | D00447579, Rev. B

20 of 83

Bifurcated Cable

Caution: To avoid potential power loss to the All-inOne computer, only connect the bifurcated power cable to provide power to the computer. Accessory power cables cannot protect the All-in-One computer if the FlexENT™ cart loses power.

9736349EN | D00447579, Rev. B

21 of 83

Bifurcated Cable

Make sure that the circuit breaker is on. I = On O = Off Refer to the "Cable diagram" on page 82 to check cable connections. Caution: Cables must be connected as shown in the "Cable diagram" on page 82. Incorrect cable connections can cause unexpected equipment performance. Contact Medtronic Technical Service for additional information.

9736349EN | D00447579, Rev. B

22 of 83

Bifurcated Cable

Power on the All-in-One computer and all accessories. Make sure that all systems function as expected.

9736349EN | D00447579, Rev. B

23 of 83