Midmark Ritter 151 and 152 Series Exam Light Rev P Installation and Operation Guide Aug 2012

warning

Unplug light from outlet and allow to cool before cleaning or replacing bulb. To prevent risk of fire, use only factory replacement bulbs (see Repair Parts). Never exceed maximum wattage requirements (25 watt, 120 VAC incandescent bulb) (35 watt, 12 VAC halogen).

PNT3

Model 152 (halogen)

Model 151 (incandescent)

PNT3

PNT4

C D

B

A

B

A MA559400

To replace bulb...

A) Model 151 (incandescent). Unscrew bulb and replace with new bulb not exceeding 25 watt rating. B) Model 152 (halogen). Remove front bezel (3 screws). C) Remove bulb by pulling outward and replace with new bulb not exceeding 35 watt rating. D) Install front bezel.

2

Repair Parts

1

2

4 22

23 15

5

Repair Parts

17 ON OFF

3

19

18 20 19

21 14 12 13

11

16

6

9 8

7

10

Item

Part Number

Description

Qty.

1

015-1383-00

Power Cord

1

2

015-1136-00

Connector(s)

5

3

015-1086-00

Switch (On / Off)

1

4

053-1076-00

Cover, Transformer

1

5

040-0008-101

Screw, Cover

2

6

040-0006-96

Screw, Bezel

3

7

015-1382-00

Transformer, 12V (Model 152)

1

8

015-1384-00

Bulb, Halogen 12V, 35 W (Model 152)

1

9

015-1385-00

Bulb, Incandescent 115V, 25 W (Model 151)

1

10

016-0842-00

Caster (w/o mounting hardware)

5

11

041-0250-06

Nut, caster mount

5

12

045-0001-61

Washer, Lock

5

13

045-0001-92

Washer, Flat

10

14

016-0841-00

Cap, Protection

5

15

002-1529-00

Kit, Goose Neck (includes item 16)

1

16

002-1576-00

• Kit, Light Split Retainer (includes items 17 thru 19)

1

17

053-1273-00*

• • Split Retainer*

1

18

053-1272-00*

• • Split Retainer w/ Stop*

1

19

040-0010-126* • • Screw, Set*

2

20

053-1052-00

Reflector

1

21

053-1173-00

Bezel

1

22

015-1381-00

Lamp Socket, Halogen (Model 152)

1

23

015-0315-17

Connector

2

Unless designated for Model 151 or 152, parts are interchangeable between models. * Order both Split Retainers (17,18) and Set Screws (19) when replacing parts on units with Serial Numbers NC003945 or NE009378 thru present.

3

Color Page

Wiring Diagram Model 151-001 Incandescent Lamp Fuse*

Blue

Blue

Gooseneck

Light Head Blue

Bulb

White

Grn/yl Grn/yl

115 VAC 25 Watt Maximum

Grn/yl

On/Off Switch

Brown Brown

Fuse* Black

Brown

Black

Base Housing

Plug 115 VAC

Model 152-001 Halogen Lamp Blue

Fuse*

White

Transformer 120V

(12V)

Blue

Gooseneck

Grn/yl (Com)

Plug

White

Blue Blue

Brown

Light Head

(12V)

Brown Grn/yl

On/Off Switch

Black Fuse* Black

Bulb

12 VAC 35 Watt Maximum

Models 151-001 and 151-002 25 Watt 120 VAC Incandescent Bulb Color Temp: None Specified Ft. Candles: +250 Model 152-001 and 151-002 35 Watt 12 VAC Halogen Bulb Color Temp: 3000K Ft. Candles: +1500

White

Base Housing

115 VAC DA107000i

Troubleshooting Guide

If service or repair is required, contact your authorized Midmark dealer.

Bulb Does Not Work. Lamp not plugged in... Plug lamp into outlet. No Voltage at outlet... Check outlet’s circuit breaker. Bulb not making contact... Assure bulb is installed correctly. Bulb burned out...Replace bulb. Internal fuse(s) open... Replace power cord. Power cord has open lead... Replace power cord. Transformer malfunctioning (Model 152 only)... Replace transformer if necessary*. On / Off switch malfunctioning ... Replace On / Off switch. * Transformer output (with load) should be between 5 and 12 VAC. 4

To contact Midmark directly: 1-800-MIDMARK (1-800-643-6275) 8:00 a.m. - 5:00 p.m. Monday - Friday EST)

www.midmark.com Note

Model / serial number information is required when calling for service.

Ritter 151 Exam Light Specifications

Ritter 152 Exam Light Specifications

Lamp head Bulb: 25-watt standard incandescent, 125 VAC

Lamp head Size: 4.5” (11.4 cm) diameter x 4.0” (10.2 cm) length

Housing construction: Polycarbonate Socket: Candelabra Base Switch: Heavy-duty on/off Shade dimensions: 6.6” (16.8 cm) diameter 5.25” (13.3 cm) length Flex arm Dimensions: 0.585” (1.5 cm) diameter 22” (55.8 cm) length Neck material: High carbon steel Neck covering: Heavy duty vinyl Color Pebble Grey with Shadow Grey accent Base tube: 36” long (91.4 cm) Tube material: Painted Pebble Grey steel tube Outer tube size: 1.0” (2.5 cm) Standard base Construction: ABS plastic Size: 13” (33 cm) diameter 2.25” (5.7 cm) thick Weight: 12 lbs. (5.4 kg) Electrical 115 VAC, 50/60 Hz, 0.22 AMPS UL60601-1 (2nd Edition) CAN / CSA C22.2 No. 601.1 M90 Accessory 9A274001 Caster base Models 151-001 Incandescent Lamp Fuse T500L, 250V, (500mA) Time Delay (built into power cord)

Bulb: 35-watt, 2,000-hour life MR16 type quartz halogen bulb with glass cover, low voltage (12 VAC) filament Illumination at 24” (60.9 cm) focal length: 1,500 fc Color temperature: 3,000K Flex arm Dimensions: 0.585” (1.5 cm) diameter 22” (55.8 cm) length Neck material: High carbon steel Neck covering: Heavy duty vinyl

Cleaning and Disinfecting Equipment Alert

When cleaning or disinfecting the light, disconnect the power and allow the unit to cool. Do not touch the glass part of the bulb or inner components of the light head with bare hands. Clean EXTERNAL SURFACES ONLY (arm assemblies and light head). Prevent fluids from leaking under covers to interiors or onto electrical components. DO NOT ATTEMPT to clean or disinfect interior; call an authorized dealer or service technician.

Equipment Alert

Use only quaternary disinfectants to disinfect light. Staining, pitting, discoloration or softening may occur if phenolic, iodophor or glutaraldehyde-based disinfectant is used on plastic surfaces of the light head.

Color Pebble Grey with Shadow Grey accent Base tube: 36” long (91.4 cm) Tube material: Painted Pebble Grey steel tube Outer tube size: 1.0” (2.5 cm) Standard base Construction: ABS plastic Size: 13” (33 cm) diameter 2.25” (5.7 cm) thick Weight: 12 lbs. (5.4 kg) Electrical 115 VAC, 50/60 Hz, 0.3 AMPS UL60601-1 (2nd Edition) CAN / CSA C22.2 No. 601.1 M90

External Cleaning Procedures For general cleaning, use a mild detergent and water solution. Wring excess solution from sponge or cloth before wiping surfaces. In accordance with your facility’s cleaning procedures: 1. Wipe external surface of arm assemblies and light head with a mild detergent and water solution. 2. Rinse all external surfaces with a soft cloth dipped in clear water, wringing excess from cloth before wiping. 3. Wipe all external surfaces dry.

Accessory 9A274001 Caster base Models 152-001 Halogen Lamp Fuse T500L, 250V, (500mA) Time Delay (built into power cord) 5

Symbols, Notes and Warranty Transportation / Storage Conditions Ambient Temperature Range:... 41°F to 100°F (5°C to 38°C)

warning

Indicates a potentially hazardous situation which could result in serious injury if not avoided.

Fragile

Relative Humidity:... 10% to 90% (non-condensing) Atmospheric Pressure:... 500hPa to 1060hPa (0.5 bar to 1.06 bars)

Humidity Limits

This product contains glass, so it should be transported and stored with care to limit vibration and shocks. 41 F 5C

Electromagnetic Interference This product is designed and built to minimize electromagnetic interference with other devices. However, if interference is noticed between another device and this product: • • • •

Remove interfering device from room Plug light into isolated circuit Increase separation between light and interfering device Contact Midmark if interference persists

Disposal of Equipment At the end of product life, the light, accessories, and other consumable goods may become contaminated from normal use. Consult local codes and ordinances for proper disposal of equipment, accessories and other consumable goods.

100 F 38 C

Storage Temperature Limits

Caution

Indicates a potentially hazardous situation which may result in minor or moderate injury if not avoided. It may also be used to alert against unsafe practices

Equipment Alert

Indicates a potentially hazardous situation which could result in equipment damage if not avoided.

Atmospheric Pressure Limits

Keep Dry

Proper Shipping Orientation

Protective Earth Ground

Fuse Rating Specification Consult Manual for more information 6

Classification: Class 1, Type B Applied Part, Ordinary Equipment (IPX0) Equipment is not suitable for use in the presence of a flammable anesthetic mixture with oxygen, air, or nitrous oxide. Clarification: Equipment is suitable for use in the presence of oxygen, air, or nitrous oxide.

CERTIFICATIONS: UL60601-1 (2nd Edition) CAN / CSA C22.2 No. 601.1 M90

Limited Warranty

a) Five (5) years for all products and components (except for the shorter periods in b and c), including plastic laminate top surfaces, door and drawer fronts, casters, and electrical components such as task lights and cords. b) Three (3) years for task light ballast. c) One (1) year for plastic laminate top surfaces and accessories.

SCOPE OF WARRANTY Midmark Corporation (“Midmark”) warrants to the original purchaser its Dental products and components (except for components not warranted under “Exclusions”) manufactured by Midmark to be free from defects in material and workmanship under normal use and service. Midmark’s obligation under this warranty is limited to the repair or replacement, at Midmark’s option, of the parts or the products the defects of which are reported to Midmark within the applicable warranty period and which, upon examination by Midmark, prove to be defective.

EXCLUSIONS This warranty does not cover and Midmark shall not be liable for the following: (1) repairs and replacements because of misuse, abuse, negligence, alteration, accident, freight damage, or tampering; (2) matching of color, grain, or texture except to commercially acceptable standards; (3) changes in color caused by natural or artificial light; (4) products which are not installed, used, and properly cleaned as required in the Midmark “Installation” and or “Installation/Operation” Manual for this applicable product; (5) products considered to be of a consumable nature; (6) accessories or parts not manufactured by Midmark; (7) specially manufactured products; (8) charges by anyone for adjustments, repairs, replacement parts, installation, or other work performed upon or in connection with such products which is not expressly authorized in writing in advance by Midmark.

APPLICABLE WARRANTY PERIOD The applicable warranty period, measured from the date of delivery to the original user, shall be as follows: DENTAL PRODUCTS are warranted against defect in material and workmanship for the period indicated below from the time of delivery: a) 2 years for all products and components (except for the periods in b through f). b) “KINK-VALVE” module carries a 10 year warranty. c) The original light bulb on a new light carries a 1 year warranty. d) Accessories not manufactured by Midmark are excluded (i.e. Fiber optic systems, Scalers, Electric micromotor systems, X-ray viewers, etc.). e) Replacement parts and accessories carry a 90 day warranty. f) Spring Health UniLite Curing Light warranty is 1 year; however, it does not cover the bulb and light-guides. To receive warranty, call Spring Health at 1-610-630-9171.

EXCLUSIVE REMEDY Midmark’s only obligation under this warranty is the repair or replacement of defective parts. Midmark shall not be liable for any direct, special, indirect, incidental, exemplary, or con-sequential damages or delay, including, but not limited to, damages for loss of profits or loss of use. NO AUTHORIZATION No person or firm is authorized to create for Midmark any other obligation or liability in connection with the products.

STERILIZER PRODUCTS are warranted against defect in material and workmanship for a period of 1 year from the time of delivery.

THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS.

CASEWORK PRODUCTS are warranted against defect in material and workmanship for the period indicated below from the time of delivery:

7

Midmark Corporation

For contact information, go to: www.midmark.com 8

© 2008 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | midmark.com