MINDRAY
DPM 4 Quick Reference Guide Rev A
Quick Reference Guide
8 Pages
Preview
Page 1
Note: The DPM4 Quick Reference Guide is not intended as a replacement to the Operating Instructions. Prior to operating equipment, the user must be familiar with the Operating Instructions Manual contents. This document is a guideline only to be used as an aid to comprehensive Inservice Training.
P/N: 046-001981-00 Rev A
Table of Contents Overview... 1 Admit a Patient without Patient Information... 2 Removing Cleaning SpOInformation... Admit a Patient and Plug Enterfrom Patient 2 2 Module... 1 Enabling SpO2 module... Dischargethe a Patient ... 1 2 Installing SpO2 patient cable and sensor... 2 Set a NIBPthe Interval... 3 Displaying the SpO 2 Set Alarm Limits ... 2 waveform... 3 PrintingActive Real Time SpO2 Waveform... 4 3 Silence Alarm(s)... PatientAll Alarms... 3 Pause Alarms... 4 Viewing and Printing Trends... 5 Set Screen Configuration (Standard, Trends, OxyCRG, Large Fonts)... 5 4 Viewing and Printing Eventsor... Change Waveform 4 Disabling the SpO2Configuration... Module... 6 Change Waveform 5 Cleaning the SpO2 Order... Module... 7 Initiate Standby... 5 Frequently Asked Questions... 7 Resume Monitoring from Standby... 5 Record Real Time Recording Strip... 5 Record Trend Table... 6 Record NIBP Measurements... 6 Record Alarm Events... 6
P/N: 046-001981-00 Rev A
1
Central Quick Reference Guide Station
Admit a Patient without Patient Information Using Control knob on control panel • Scroll and select Menu • Scroll and select Patient Setup • Select Quick Admit • Select Yes to confirm clearing prior data and • Select Patient type (size) • Select OK to confirm and return to normal screen
Admit a Patient and Enter Patient Information Using Control knob on control panel • Scroll and select Menu • Scroll and select Patient Setup • Select Admit • Select Yes to confirm clearing prior data and • Scroll and select to enter patient information • Select OK to confirm and return to normal screen
Discharge a Patient Using Control knob on control panel • Scroll and select Menu • Scroll and select Patient Setup • Select Discharge Patient (Clear Patient Data) • Select Yes to confirm clearing prior data and return to normal screen Note: Clear Patient Data is present if patient information is omitted. P/N: 046-001981-00 Rev A
2
Central Quick Reference Guide Station
Set a NIBP Interval Using Control knob on control panel • Scroll and select NIBP tile • Scroll and select Interval • Scroll to select time • Scroll and select Exit to return to normal screen
Set Alarm Limits Using Control knob on control panel (Option 1) • Scroll and select Parameter tile • Scroll and select Alm HI/Alm LO • Scroll to adjust alarm limit • Scroll and select Exit to return to normal screen OR Using Control knob on control panel (Option 2) • Scroll and select Menu • Scroll and select System Setup • Scroll and select Alarm Setup • Select Alm Sel • Select parameter’s Alm Setup • Scroll and select Alm HI/Alm LO • Scroll to adjust alarm limit • Scroll and select Exit to return to normal screen
P/N: 046-001981-00 Rev A
3
Central Quick Reference Guide Station
Silence Active Alarm(s) Press and hold Silence button >2 seconds. If new alarms occur, system silence will be terminated
Pause All Alarms Press Silence button. All alarms are paused for a preconfigured time (1, 2, or 3 minutes). All visual and audio alarm notification is suspended. Alarm notification will resume if Silence is pressed a second time or once the preconfigured time has elapsed.
Set Screen Configuration (Standard, Trends, OxyCRG, or Large Fonts) Using Control knob on control panel • Scroll and select Menu • Scroll and select System Setup • Scroll and select Face Select • Scroll to select screen • Scroll and select Exit to return to normal screen
Change Waveform Configuration Using Control knob on control panel • Scroll and select Menu • Scroll and select System Setup • Scroll and select Trace Setup • Scroll and select waveform(s) to be displayed (A √ in the waveform box indicates waveform is selected) P/N: 046-001981-00 Rev A
4
Central Quick Reference Guide Station
Change Waveform Order Using Control knob on control panel • Scroll and select Menu • Scroll and select System Setup • Scroll and select Trace Setup • Scroll and select Wave Sequence • Scroll to select channel to change • Select parameter • Scroll and select to Exit to return to normal screen
Initiate Standby Using Control knob on control panel • Scroll and select Standby • Scroll and select Yes to confirm
Resume Monitoring from Standby Press any key on front panel and Scroll and select Yes to confirm
Record Real Time Recording Strip • Select Record key on control panel • Select Record key to stop (if continuous mode is enabled)
P/N: 046-001981-00 Rev A
5
Central Quick Reference Guide Station
Record Trend Table Using Control knob on control panel • Scroll and select Menu • Scroll and select Trend Table • Scroll and select Resolution • Scroll to adjust time interval • Scroll and select REC to record • Scroll and select Exit to return to normal screen
Record NIBP Measurements Using Control knob on control panel • Scroll and select Menu • Scroll and select NIBP Recall • Scroll and select REC to record • Scroll and select Exit to return to normal screen
Record Alarm Events Using Control knob on control panel • Scroll and select Menu • Scroll and select Alarm Recall • Scroll to adjust Start/End time • Scroll and select Alarm Recall Event to select sorting criteria • Scroll and select Alarm Recall to view alarm event or UP-Down to view other alarm events • Scroll and select REC to record • Scroll and select Exit to return to normal screen P/N: 046-001981-00 Rev A
6