Operating Table Model MOT-VS500DK Reverse mode Supplementary Information Ver.2 April 2021

1. Preparing and checking the reverse mode

WARNING

• The lateral tilt, Trendelenburg and sliding operate in the directions opposite to the switches on the control unit. The operators must make sure to check each of the switches and their operating directions prior to surgeries. If they are operated without them having been checked, the patients may get injured due to them unexpectedly operating. • Do not perform the flexing, reflexing nor moving up and down the lift-up unit. Since the tilting positions of the patients are different from the normal positions, the patients may unexpectedly bear more loads,and thereby get injured. • The allowable patient weight when in reverse mode is 135 kg. If patients whose weights exceed 135 kg are placed on the operating table, then it may tip over, and the patients may thereby get injured.

Preparing the reverse mode For the MOT-VS500DK, detach the leg plate, connect the Leg-side Reversal Adapter, and attach the accessories in accordance with their applications.

Checking the reverse mode To verify that the patient is in the reverse mode, check that the reverse mode identification label is aligned with the patient's head as per the following illustration. The illustration shows the Leg-side Reversal Adapter and the 100cm Carbon Fiber Extension Ⅱ after removing the MOT-VS500DK's leg plate.

Reverse mode identification label Supplement-1

Reverse mode

2. Lateral tilt Tilting to the left

1. Hold down

and press

.

The tabletop tilts to the left in the view from the reverse mode identification label side. Left down

Tilting to the right

1. Hold down

and press

.

The tabletop tilts to the right in the view from the reverse mode identification label side. Right down

Supplement-2

Reverse mode

3. Trendelenburg Trendelenburg (Head down)

1. Hold down

and press

.

The reverse mode identification label side of the tabletop moves down.

Head down position

Reverse Trendelenburg (Head up)

1. Hold down

and press

.

The reverse mode identification label side of the tabletop moves up. Head up position

Supplement-3

Reverse mode

4. Sliding Sliding in the head direction

1. Hold down

and press

.

The tabletop slides to the reverse mode identification label side.

Head direction

Sliding in the foot direction

1. Hold down

and press

.

The tabletop slides to the head plate side.

Foot direction

Supplement-4

Reverse mode

5. The back plate Tilt up the patient’s leg

1. Hold down

and press

.

The back plate moves up. (The plate on the patient’s leg side moves up.)

Tilt down the patient’s leg

1. Hold down

and press

.

The back plate moves down. (The plate on the patient’s leg side moves down.)

Supplement-5

Sales Agent Emergo Europe B.V. Prinsessegracht 20, 2514 AP The Hague, The Netherlands

MIZUHO Corporation 3-30-13 Hongo, Bunkyo-ku Tokyo 113-0033, Japan https://www.mizuho.co.jp