Patient Helper Hill-Rom VersaCare Assembly Instructions Rev B

PATIENT HELPER ON THE HILL-ROM VERSACARE® BED ASSEMBLY INSTRUCTIONS 3423 1.

one each

Attach Mizuho OSI Patient Helper Mounting Sleeve to the Hill-Rom VersaCare® Bracket using the provided hardware.

NOTE: The Patient Helper Mounting Sleeve must be attached to the Hill-Rom Bracket prior to mounting the Bracket to the bed. 2. 3. 4. 5.

Insert the Patient Helper Upright into the Patient Helper Mounting Sleeve and secure with the Quick Release Knob. Attach the Trapeze Arm Assembly and Heavy Duty Trapeze. Adjust the Trapeze height as needed with the “S” hook on the chain. Swivel and lock the Trapeze Arm Assembly in any position using the Swivel Lock Handle.

Failure to securely tighten all knobs may lead to product failure and injury to the patient.

3. Trapeze Arm Assembly P/N 3423-05

5. Swivel Lock Handle P/N NH0817

2. Patient Helper Upright P/N 3423-6

4. Heavy Duty Trapeze P/N 3095

2. Quick Release Knob P/N 3423-19

1. Patient Helper Mounting Sleeve P/N 3423-1

1. Hill-Rom Bracket P/N P844F01 Supplied from Hill-Rom

____________________________________________________________________ LATEX

!

MIZUHO OSI ● 30031 Ahern Ave. ● Union City, CA 94587 (800) 777-4674 ● FAX (510) 429-8500 www.mizuhosi.com EC REP

NW0517 Rev. B

Emergo Europe ● Molenstraat 15 ● 2513 BH The Hague, The Netherlands

PATIENT HELPER ON THE HILL-ROM VERSACARE® BED ASSEMBLY INSTRUCTIONS

ECN 10130 5/21/2010