Operator’s Manual
42 Pages
Preview
Page 1
Operator’s Manual OLYMPIC CFM 6000 Version 2
CAUTION
Read and be familiar with this manual before operating this device. To ensure operator, technician, and patient safety, use only as specified in this manual.
0086 602053A DCN: 08-0175
Product Manufacturer: Natus Medical Incorporated 5900 First Avenue South Seattle, WA 98108 USA Toll-free: Phone: Customer Service Fax: Technical Service Fax:
1-800-308-8684 (US/Canada) +1-650-802-0400 (international) +1-650-802-6620 +1-650-802-8680
Any product vigilance related communications per 93/42/EEC Article 10 should be referred to: European Union Authorized Representative Natus Europe GmbH Bärmannstrasse 38 D-81245 München, Germany
The information in this manual is subject to change without notice. No part of this manual may be photocopied, reproduced, translated, or reduced to any electronic medium without the express written permission of Natus Medical Incorporated. All tradenames and trademarks mentioned herein are property of their respective owners. The CFM 6000 software described in this manual is ©2003–2008 Natus Medical Incorporated. © 2008 Natus Medical Incorporated. All rights reserved.
Contents Introduction... 1 Indications for Use... 1 Warnings and Precautions... 2 Conventions... 3 Symbols... 3 CFM 6000 System... 5 CFM 6000 Components... 5 CFM Cart... 6 CFM Cart Components... 6 Using the CFM Cart... 7 Olympic CFM 6000 Data Displays... 8 CFM Tracings... 8 EEG Tracings... 9 Impedance Tracings... 9 Starting and Stopping the CFM 6000... 10 Preparing the Patient - Applying Electrodes... 10 Operating the CFM 6000... 13 Understanding the CFM 6000 Screen... 13 Buttons... 14 Alerts... 14 Customizing Settings... 15 Changing Predefined (Standard) Markers... 15 Changing the CFM Tracing Display Style... 16 Adjusting the System Date/Time... 16 Language... 16 Changing the Operation Mode... 16 Changing Data Entry Capitalization... 17 Changing Patient Information to Display... 17 Recording a Session... 17 Viewing an EEG Tracing... 18 Navigating an EEG Tracing... 19 Changing EEG Speed and Amplitude... 20 Entering Patient Information... 20 Using Markers... 21 Placing Markers... 21 Editing a Placed Marker... 22 Finding Placed Markers... 22 Viewing Marker Details... 23 Opening a Session for Viewing... 23 Using the CFM 6000 Printer... 23 Printing a Tracing... 23 Replacing Printer Paper... 25 Managing Files... 26 Archiving a Session to CD... 26 Restoring Sessions from CD... 27 Deleting Files... 27 Checking Hard Disk Space... 28
OLYMPIC CFM 6000 Operator’s Manual
i
Cleaning and Maintenance... 28 Cleaning the CFM 6000 and the CFM Cart... 28 Tightening the Tilt Adjustment Hinge... 29 Updating Software... 29 Disposing of Product... 30 Assembling the CFM Cart... 30 Troubleshooting... 33 Service... 34 Replacement Parts... 34 Contact Information... 34 CFM 6000 Catalog Items... 35 Standards and Compliance... 35 Specifications... 36
ii
OLYMPIC CFM 6000 Operator’s Manual
Introduction This manual provides the necessary information for installing, maintaining, and operating the Olympic CFM 6000 and the Olympic CFM cart. Olympic CFM 6000 is a cerebral function monitor (CFM) that monitors the state of the brain by acquiring an EEG signal and passing it through a special algorithm to display a continuous view of global electrocortical activity. It is suited for use in the NICU, ICU, PICU, emergency room, operating room, and clinical research laboratory. The CFM 6000 should be used only under the direct supervision of a licensed medical practitioner who is trained in its operation and safe use.
Indications for Use The Olympic CFM 6000 is intended to be used by a variety of clinicians for the acquisition of electroencephalography (EEG) signals that can be used in conjunction with other clinical data to:
Monitor the state of the brain.
Determine and monitor long-term the neurological status of patients who may have suffered an hypoxic-ischemic event.
Assist in the clinical management and treatment of a patient by monitoring neurological status to indicate how the treatment affects the neurological status.
Assist in the prediction of neurological outcome.
Monitor and record frequency and intensity of seizures to assist in the management of anticonvulsive therapy.
Assist in the prediction of the severity of hypoxic-ischemic encephalopathy (HIE) and the long-term outcome in infants who have suffered an hypoxic-ischemic event.
OLYMPIC CFM 6000 Operator’s Manual
1
Warnings and Precautions Electrical Grounding:
Always connect the system power cord directly to a hospital-grade grounded power receptacle with a functional ground.
To avoid electrical shock hazard, never touch the open rear-panel connectors and the patient at the same time. Always place connector covers over their receptacles when not in use.
WARNING
Internal Voltage:
To avoid electrical shock hazard, always turn off the CFM 6000 and unplug its power cord before cleaning the outer surfaces of the device or disassembling the device. For cleaning instructions, see Cleaning and Maintenance on page 28.
Liquids & Gases:
Never use liquids on or near the CFM 6000. Fluid seepage into internal components creates a potential shock hazard. Never operate the system if internal components have been exposed to fluid.
Cables:
Use of cables that exceed the lengths or are of different types than noted in the Specifications on page 36, may result in increased radio emissions or decreased RF immunity.
Operation: CAUTION
Only properly trained medical and service personnel should operate and maintain the CFM 6000 and the CFM cart. As appropriate, maintain any records that indicate training attendance and completion.
This device should only be used under the direct supervision of a licensed medical practitioner.
Explosion hazard. Do not use in the presence of flammable anesthetics.
Service:
Only technically qualified personnel should perform service procedures. On request, Natus Medical Incorporated will provide circuit diagrams, parts lists, and instructions to assist qualified technical personnel to repair the CFM 6000 to the printed circuit board (PCB) level. To obtain service, see Service on page 34.
Detachable Components:
Never autoclave the CFM 6000 or its components as doing so will cause damage and void the warranty.
Electromagnetic Interference:
2
Operation of this device may affect or be affected by other nearby equipment due to electromagnetic interference (EMI). If this occurs, place the devices further apart, re-orient the device cabling, or plug the devices into separate outlet circuit branches.
Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the accompanying documents.
Portable and mobile RF communications equipment can affect medical electrical equipment.
OLYMPIC CFM 6000 Operator’s Manual
CONT’D
USB Devices:
To meet electrical safety requirements, USB devices used with the CFM 6000 must meet the requirements of IEC 60601-1. Alternately, if line connected and approved to an appropriate national standard other than 60601-1, a separation device must be used (refer to IEC 60601-1-1).
To avoid electrical shock hazard, ensure that the cover is securely placed over the USB port connector when not in use, and never touch the connector and patient simultaneously.
CAUTION
Product Disposal:
The fluorescent lamp in the LCD display contains a small amount of Mercury. Follow your local ordinances and regulations for disposal.
Conventions The following conventions are used in this manual: Table 1
Conventions
Convention
# NOTE
Description Provides additional information to clarify a point. Indicates situations that could result in damage to the equipment.
NOTICE!
Indicates situations that, if not avoided, could result in minor to moderate injury to the patient or operator. CAUTION
Indicates situations that, if not avoided, could result in serious injury or death to the patient or operator. WARNING
Symbols The following symbols are used on the CFM 6000, its accessories, or packaging. Table 2
Symbols
Symbol
Definition
Symbol
Definition
Alternating current (AC)
Equipotential ground
Atmospheric pressure
Latex free
Attention, consult accompanying documents
Lot - the manufacturer’s production identification number
Authorized representative
Manufacturer
Defibrillation proof type-BF and complies with IEC Publication 601
Mouse - this port is intended only for use in Service mode
Catalog number
Network/Ethernet port
OLYMPIC CFM 6000 Operator’s Manual
3
Table 2
Symbols, Continued
Symbol
Definition
Symbol
Cart tilt
Percent humidity
Cart raise/lower
Mains power ON
CE mark
Mains power OFF
Electrical shock hazard
Serial number
Package of three electrodes, Silver/Silver Chloride (Ag/AgCl)
Shipping specification
Bag of 20 electrode sets: 20 packages per bag
Single use only - discard after use, do not sterilize
Box of 100 electrode sets: five bags of electrodes per box
Storage specification
Foot activated
Temperature
Fuse
USB port - see the USB port precautions on page 3
Ground
Use by the expiration date
Input/output - RS-232 in/out serial port
Use indoors at normal room temperature and keep out of direct sunlight
Keyboard - this port is intended only for use in Service mode
4
Definition
OLYMPIC CFM 6000 Operator’s Manual
CFM 6000 System The CFM 6000 comes fully assembled with all the accessories (electrodes, NuPrepTM skin prep gel, printer paper, clips, and power cord) required to get started. Just plug in the power cord and the amplifier module, and the device is ready to operate.
CFM 6000 Components 1
Touch screen: see Understanding the CFM 6000 Screen on page 13
2
Printer: see Replacing Printer Paper on page 25
3
CD-RW drive: for archiving patient files to compact disc and for updating software
4
Amplifier module: connects electrodes to the CFM 6000
5
Handle: use to carry the CFM 6000
6
Power cord receptacle: connects the CFM 6000 to a hospital-grade electrical outlet via power cord
7
Power on/off switch: use to turn the CFM 6000 power ON or OFF (see Starting and Stopping the CFM 6000 on page 10)
8
Fuses
9
Serial I/O port: for future use
1
2 3
4
5
10 Keyboard port: for service use only 11 Mouse port: for future use only 12 USB port: for future use; shown with cover in place (see the USB port precautions on page 3)
13 Network/Ethernet port: for future use 14 Equipotential ground 6
10 7
11
12
13
14
15 Electrodes with touch-proof connectors: connect to the amplifier module (hydrogel electrodes shown)
8 9
4 15
OLYMPIC CFM 6000 Operator’s Manual
5
CFM Cart The optional Olympic CFM cart is intended for use with the Olympic CFM 6000. The cart makes it easy to use, move, and store the CFM 6000 and provides storage space for related accessories. For ordering information, see CFM 6000 Catalog Items on page 35.
For information about assembling the CFM cart, see Assembling the CFM Cart on page 30.
CFM Cart Components
1
2 6 3
7
8
4 5 1
Storage drawer
2
Handle
3
Post
4
Foot pedal – for height adjustment
5
Footprint base with five caster wheels, two locking
6
Power cord clamp and cleats
7
Thumbscrews with spacers
8
Drawer slides
The storage drawer provides space for the following CFM 6000 accessories: Amplifier module
6
Several packages of electrodes
A tube of electrode cream or NuPrep™ Skin Prep Gel
Several blank CD-R discs
A roll of thermal imaging paper
OLYMPIC CFM 6000 Operator’s Manual
Using the CFM Cart
CAUTION
Keep the CFM cart caster wheels locked during use to prevent the CFM 6000 from pulling on the electrode connections.
Periodically inspect the caster wheels to ensure that the locking mechanism works correctly.
To lock/unlock the two locking caster wheels: Press the wheel lock down to lock the wheel.
Pull the wheel lock up to unlock the wheel.
Figure 1
press down to lock
Locking/unlocking the caster wheels
press up to unlock
To adjust the height: Press the foot pedal while pulling the handle up to raise the device.
Press the foot pedal while pushing the handle down to lower the device.
To tilt the drawer assembly and the CFM 6000: With one hand on top of the CFM 6000 and the other on the bottom of the drawer, firmly tilt the drawer forward or backward. The drawer tilts up to 15º in either direction (up/down), allowing you to easily change the viewing angle and optimize touch-screen access from a seated or standing position. Figure 2
Adjusting the height and tilt
To maneuver the CFM cart: Use the handle to move or maneuver the cart.
OLYMPIC CFM 6000 Operator’s Manual
7
To use the cart to transport the CFM 6000: 1
Unplug the power cord of the CFM 6000 from the power receptacle, and wrap the excess cord around the cleats on the back of the drawer (see Figure 17 on page 33).
2
Ensure that the two locking wheels are in the unlocked position (see Figure 1).
3
Ensure that the CFM 6000 is not in a tilted position.
4
Ensure that the drawer is fully closed and latched.
5
Using the cart handle, push the cart forward.
Olympic CFM 6000 Data Displays The Olympic CFM 6000 records and displays three types of tracings: CFM, EEG, and impedance.
CFM Tracings The CFM tracing indicates the overall electrocortical background activity of the brain by recording amplitude-integrated electroencephalography (aEEG). The EEG signal is filtered, rectified, and semi-logarithmically compressed. It is then displayed at a very slow chart speed, 1 mm per minute. A high reading on the chart indicates a high level of activity; a low value indicates low activity. The CFM 6000 screen shows three hours of a CFM tracing. The CFM 6000 may be applied at any time, or used continuously, to determine the neurological status of a patient. A minimum of 20 minutes of trace should be observed to make a determination of neurological status. However, when there is a question about the presence of seizures, or potential changes in neurological status as a result of illness or other clinical treatment, it is generally best to observe the record for a longer, continuous period. The exact length of this period depends on the frequency of the seizures, or the condition or treatment being monitored. The CFM may record continuously for up to 30 days. A CFM tracing is created by the continuous up and down movement of a digital pen responding to subtle variations in a brain's electrocortical activity. A tracing rises in response to increased activity and drops in response to lowered activity according to a fixed algorithm. With the pen moving at a very slow rate across the screen, 1 pixel width of CFM tracing reflects about 15 seconds of data. Previous versions of the Olympic CFM 6000 offered only one view, CFM Basic. The CFM Basic view shows a series of vertical lines of different lengths, each of uniform density. This view shows no variation in the color of the 'ink.' CFM 6000 version 2.0 introduces a new and more sensitive view, CFM Insight. This view shows each vertical line with variable density that reflects the relative amount of time the brain spends at different levels of electrical activity, more closely approximating the trace generated by a CFM 5330 (Lectromed). Sometimes these two views are nearly identical; in other cases, Insight provides a clear gray-scale effect where a dark central band of activity can be seen, surrounded by lighter bands of activity above or below. This can be a valuable aid to identification of artifacts and can help identify certain conditions more clearly. The CFM 6000 now offers both views and the capability to toggle between them. The following illustration shows a tracing with both views.
8
OLYMPIC CFM 6000 Operator’s Manual
Figure 3
Basic and Insight views
EEG Tracings The EEG tracing shows the underlying EEG detail that relates to the cursor position on the CFM tracing. The EEG cursor on the CFM tracing represents 15 seconds. The EEG window shows between 3 and 14 seconds of the EEG tracing at a time, depending on the EEG speed setting. The EEG can help confirm seizures and other brain activity. Display the EEG at a lower amplitude setting to see more detail; display it at a higher amplitude setting to show only major events. For information about changing speed and amplitude settings, see Changing EEG Speed and Amplitude on page 20. The following illustration shows a CFM tracing with underlying EEG data. Figure 4
CFM tracing with EEG detail
Impedance Tracings The impedance tracing indicates the connection quality (contact between the patient and the electrodes) and distinguishes noise. Impedance greater than 20 kΩ indicates that the electrodes should be reapplied or replaced. Occasional random spikes might occur when electrode conductivity changes for brief moments. The Lead-Off alert appears and sounds if the impedance becomes greater than 20 kΩ for more than three seconds. Tip: To maintain good impedance when recording over long periods of time, it might be necessary to reattach or replace the electrodes periodically. The following illustration shows a CFM tracing with the associated impedance tracing. Figure 5
CFM tracing with impedance
OLYMPIC CFM 6000 Operator’s Manual
9
Starting and Stopping the CFM 6000 To start the CFM 6000:
#
NOTE
1
Attach the power cord to the rear panel of the device, and then connect it to a hospital-grade electrical outlet. If the CFM 6000 is on a cart, lock the cart wheels.
2
Connect the amplifier module cord to the CFM 6000.
It is recommended that you connect the amplifier module to the CFM 6000 before placing electrodes on the patient.
3
Press the power switch to the ON (|) position, and wait for the CFM 6000 main screen to appear.
To shut down the CFM 6000:
#
NOTE
CAUTION
If recording is in process, first touch 9RECORD to stop recording.
1
Press the CFM 6000 power switch to the OFF (O) position, and unplug the power cord from the electrical outlet.
2
Remove the electrodes from the patient and discard the electrodes.
To avoid electrical shock hazard, ensure that the cover is placed over the USB port connector when not in use, and never touch the connector and patient simultaneously. For additional USB cautions, see page 3.
3
Unplug the amplifier module, and clean the device and module according to the instructions in Cleaning and Maintenance on page 28.
Preparing the Patient - Applying Electrodes #
NOTE
Read the warnings and cautions on page 2 before operating this device.
To obtain assistance or reorder items, see Service on page 34 and Replacement Parts on page 34.
Required items: Electrodes - hydrogel or low-impedance needle
10
Skin prep gel, such as NuPrep™ brand (if using hydrogel electrodes) (part no. 62060)
2x2 or 4x4 gauze pads (if using NuPrep skip prep gel)
OLYMPIC CFM 6000 Operator’s Manual
Adhesive tape, Coban™ wrap, or Kling® wrap (if using low-impedance needle electrodes)
Medications may affect the patient’s record. Anticonvulsants or sedatives may transiently suppress the CFM record. Administration of drugs or other clinical events should be noted to facilitate interpretation of the record.
Poor electrode contact may cause high impedance. To ensure good electrode contact, always prepare the patient’s skin before attaching the electrodes.
For instructions and warnings relating to cleaning agents and skin prep gel (for example, alcohol wipes or NuPrep), consult the product instructions.
1
Verify that the amplifier module is connected to the CFM 6000 and that the CFM 6000 is turned on.
2
Determine whether to place electrodes biparietally or frontally and whether to use hydrogel or low-impedance electrodes, and then locate the areas of contact on the patient’s head according to one of the following placement methods:
CAUTION
NOTICE!
#
NOTE
Depending on the type of electrodes used, color coding indicated below may not be applicable. The BLACK electrode is the ground; the YELLOW electrode is placed on the patient’s right (left when facing the patient); and the RED electrode is placed on the patient’s left (right when facing the patient).
Placement method 1 - Biparietal placement for hydrogel or low-impedance needle electrodes: Figure 6
a
Biparietal placement
Locate the vertex and identify a point 25 mm anterior to it. The BLACK electrode (1) is to be placed at this location.
b Locate a point approximately 50 mm posterior to the vertex. The RED electrode
(2) is to be placed approximately 37 mm to the patient’s left of this point (right if facing the patient).
c
The YELLOW electrode (3) is to be placed approximately 75 mm to the patient’s right of the red electrode (left if facing the patient).
OLYMPIC CFM 6000 Operator’s Manual
11
Placement method 2 - Frontal placement for hydrogel electrodes (use this method if hair interferes with biparietal placement of hydrogel electrodes): Figure 7
Frontal placement
The BLACK electrode (1) is to be placed at the center of the patient’s forehead as close to the hairline as possible. b The YELLOW electrode (2) is to be placed approximately 37 mm to the patient’s right of the center electrode (left if facing the patient). c The RED electrode (3) is to be placed approximately 37 mm to the patient’s left of the center electrode (right if facing the patient). a
#
NOTE
#
NOTE
3
Visually examine the electrode package for damage before opening it. Remove the electrode set from the package, and examine the electrodes and leads. If damage is apparent, discard the set.
4
Clean and dry the areas of the patient’s head where the electrodes are to be placed. Do not use alcohol for cleaning: alcohol can increase impedance.
It is recommended that you prep and place one electrode at a time when possible.
Where hair might present a barrier to good electrode contact, either shave the area or tamp down the hair with water during cleaning, and then pat dry.
5
#
NOTE
If using hydrogel electrodes, prepare the areas of contact prior to placement, as follows: a Apply a small dot of skin prep gel, such as NuPrep, to each area of contact. You can use a 2x2 or 4x4 gauze pad to apply the NuPrep.
Always apply the skin prep gel directly to the skin. Never apply it directly to an electrode because it can increase impedance.
b Vigorously rub the NuPrep over the skin for 20 to 30 seconds, removing the
surface layer of dead skin to improve conductivity. Ensure that the entire surface area to be covered by the electrode is prepared. c Thoroughly remove the NuPrep with a new, clean gauze pad, and make sure the area is completely dry. 6
12
After the area is prepared, attach the electrodes, as follows:
For low-impedance electrodes, insert the needle subcutaneously up to the plastic hub and secure as you would an IV.
For hydrogel electrodes, run a finger around the edges of the electrode for 20 to 30 seconds to ensure a secure seal.
OLYMPIC CFM 6000 Operator’s Manual
7
Form a strain relief to minimize motion artifact by collecting the three leads into a bundle and tying the bundle into a small, loose loop near the electrodes. The strain relief loop should be as close to the electrodes as possible, while remaining isolated from them. Secure the loop to the patient’s head with Coban™ or Kling® wrap. If desired, create a second strain relief loop near the amplifier end of the leads.
8
Connect the leads to the amplifier module, matching them to the corresponding color-coded receptacles, and clip the amplifier module to the patient’s bedding.
Operating the CFM 6000 #
NOTE
Read the warnings and cautions on page 2 before operating this device.
To obtain assistance or reorder items, see Service on page 34 and Replacement Parts on page 34.
Understanding the CFM 6000 Screen The following illustration shows the location of major types of information on the CFM 6000 screen. Figure 8
Main screen Alert messages
Patient display NAME or ID DOB: 00/00/00 00:00
PLAYBACK
Marker label
RECORDING
LEAD OFF
System date/time 00/00/00 00:00:00
marker 00/00/00
00:00 DAY
00:00 DAY
0:00 00/00/00
00:00 DAY
100 50
0:00 00/00/00
50 100
Trace day/time
25
µV
10
EEG cursor (when the EEG is displayed)
10
CFM display
CFM
25
Marker cursor
5
5
0
0
20 10
00/00/00 9RECORD
0
0
10
Marker time
20
Impedance display
IMPEDANCE
kΩ
00:00 DAY
MARKER
00:00
EEG
PATIENT
TOOLS Recording pen
OLYMPIC CFM 6000 Operator’s Manual
13
Buttons The following table describes the functions of buttons on the CFM 6000 screen. For information about buttons used to navigate EEG tracings, see Viewing an EEG Tracing on page 18. Button
Function Print. Touch to print the displayed tracing. Help. Touch to open Help. Previous/next marker. Touch to move the display to the previous or next off-screen marker. Touch and hold to jump to the beginning or end of the tracing. If you scroll during recording and want to return to real-time display, touch and hold the next marker button. Auto-scroll. Touch to automatically scroll backward or forward through the tracing. Touch again to stop scrolling. When recording, the display returns from playback to real-time when the end of the trace is reached. Scrollbar. Touch or drag the bar or touch the buttons to scroll backward or forward through the tracing. Touch and hold to scroll quickly. When recording, the display returns from playback to real-time when the end of the trace is reached. If you scroll during recording and want to return to real-time display, touch and hold the forward button until the end of the trace is reached or drag the scrollbar all the way to the right. EEG cursor or marker position. Touch to scroll the EEG cursor or a marker cursor backward or forward in 15-second increments. Close. Touch to close the active window. More. Touch to expand the active window, showing additional functions if available. Less. Touch to reduce the active window. Some functions might no longer show.
Alerts Alerts are status messages that appear in color-coded boxes at the top of the CFM 6000 screen: green for normal, yellow for caution, red for stop and take action. For red alerts, a dialog box describes the action that is needed. For these alerts, take the appropriate action and press OK to close the dialog box, stop the alarm, and resume recording. The possible alerts are the following: Alert
14
Meaning
CALIBRATING
The system is performing a calibration check. A calibration check occurs each time recording is started. It is important to wait for calibration to complete before attempting any other tasks.
CALIBRATION
The calibration check failed. The amplifier module needs to be replaced.
CHECK SUM
The amplifier non-volatile RAM is corrupted. The amplifier module needs to be replaced.
COMM ERROR
A communication error occurred between the amplifier module and the CFM 6000. Disconnect and reconnect the amplifier module. Replace the module if the problem is not corrected.
OLYMPIC CFM 6000 Operator’s Manual
Alert
Meaning
CONNECTION
The connection to the CFM 6000 is lost. The amplifier module might have come loose. Check the connections to the amplifier and to the patient.
LEAD OFF
An electrode is disconnected, or there is poor contact between the electrode and the patient. Press SILENCE to silence the alarm for three minutes; press DISABLE to disable alarms for the remainder of the session.
LOADING xx%
A session is loading from the hard disk.
MAX SIZE
The maximum size of the recording session has been reached. The maximum recording session is 30 days.
OVERLOAD
(Appears as a red line at the top of the CFM tracing.) The input level to the system is too high, and the CFM trace is locked above 100 µvolts.
PLAYBACK
(Appears only during recording.) The data displayed on the screen is not real time. This alert appears when you scroll through the tracing or when you view a static EEG tracing.
POWER INTERRUPT
Power was interrupted or the system reset. Press YES to reload the file/session. Press NO to return to the start screen.
RECORDING
CFM recording is in progress.
Customizing Settings Before beginning to record a patient session, customize the settings that are appropriate to your facility. You can customize the following:
Predefined (standard) markers
CFM tracing display style
System date/time
Language
Operation mode (only for Natus Medical Incorporated service personnel)
Capitalization used for data entry
Types of patient information to be displayed while recording or viewing a patient session
Changing Predefined (Standard) Markers Markers are used to indicate the occurrence of significant events on CFM traces. You can customize the standard markers that come with the CFM 6000 to meet the needs of your facility. Changing a standard marker does not change any markers that were previously applied to CFM tracings.
To change standard markers: 1
Touch TOOLS, and then touch SETTINGS.
2
Touch MARKERS, and then touch a marker label and use the displayed keyboard buttons to edit it.
3
Touch ACCEPT to save the change, and close the TOOLS window.
OLYMPIC CFM 6000 Operator’s Manual
15
Tip: To confirm your changes and verify that all the predefined markers are correct for your facility, touch MARKERS and confirm the marker labels in the Standard Markers window.
Changing the CFM Tracing Display Style Tracings can be displayed according to preference. You can choose between CFM Insight (gray-scale) or CFM Basic (solid) and between light on a dark background or dark on a light background.
To change the tracing display style: 1
Touch TOOLS, and then touch SETTINGS.
2
Touch DISPLAY, and choose between DARK TRACING and LIGHT TRACING and between INSIGHT (gray-scale) and BASIC (solid).
3
When finished, close the TOOLS window.
Adjusting the System Date/Time 1
Touch TOOLS, and then touch SETTINGS.
2
Touch DATE/TIME, and select the format for the date.
3
Touch TIME ZONE to set the time zone relative to Greenwich Mean Time, and then touch ACCEPT.
4
Touch DAYLIGHT SAVINGS TIME to activate or deactivate Daylight Savings Time.
5
Touch DATE and use the provided calendar controls to set the system date, and then touch ACCEPT.
6
Touch TIME and use the provided clock controls to set the system time, and then touch ACCEPT.
7
When finished, close the TOOLS window.
Language To see CFM 6000 controls in a language other than English, customize the language setting. To change the default language:
#
NOTE
1
Touch TOOLS, and then touch SETTINGS.
2
Touch LANGUAGE, and select the desired language.
After you install or update the system software, you need to reselect your preferred language.
3
When finished, close the TOOLS window.
Changing the Operation Mode Service mode is reserved for use by Natus Medical Incorporated representatives. A password is required to change the mode.
16
OLYMPIC CFM 6000 Operator’s Manual