Neoprobe Corporation
neoprobe System
Mammotome Neoprobe GDS Gamma Detection System Quick Guide May 2022
Quick Guide
2 Pages
Preview
Page 1
Quick Guide for the Neoprobe ® GDS System Utilizing Wireless Probes With Bluetooth® II Technology
1
Powering On The Neoprobe® GDS Console And Probe
2
Linking Wireless Probe To Console For The First Time
1. Press Power Button on console.
1. Console displays “
2. Insert CR123 Lithium Ion Battery in either direction into probe and close cap.
2. Press and hold Target Count Button on console. Console displays “
.”
3. Once linked, Mode Indicator LED on probe flashes blue.
3. Press Probe Button to power up.
. ” Target Count
4. Mode Indicator LED on probe will illuminate solid blue.
Power
1.
1.
2. Probe Button
Probe Button CR123 Lithium Ion Battery
2. / 3.
Endcap
Mode Indicator LED
3. Please Turn Over For Further Instructions
®
For additional assistance, please contact: Mammotome Technical Support: 1-877-926-2666 (Option 3) | Email: TechnicalSupport@mammotome.com
Quick Guide for the Neoprobe ® GDS System Utilizing Wireless Probes With Bluetooth® II Technology
UTILIZING WIRELESS PROBES WITH BLUETOOTH II TECHNOLOGY
2A
Linking Wireless Probe To Console (Subsequent Links To Same Unit) 1. Press Power Button on console. Confirm “ displayed on the screen.
Power
” is
2. Power up probe by pressing Probe Button. It will automatically link to console within five seconds.
2B
Probe Button
1.
2.
Relinking The Probe After Sleep Mode 1. To conserve battery power, probe will go into sleep mode if no radiation has been detected or if the Probe Button has not been pressed for 10 minutes. 2. Press Probe Button to “awaken.” Probe will automatically relink to console within five seconds.
Probe Button
1.
2.
© 2022 Devicor Medical Products, Inc. All rights reserved. Mammotome and Neoprobe are registered trademarks of Devicor Medical Products, Inc. in the USA and optionally in other countries. Other logos, product and/or company names might be trademarks of their respective owners. MDM# 150032 Rev 05/22