NSK NAKANISHI
Care 3 Plus Quick Guide Ver 5
Quick Guide
2 Pages
Preview
Page 1
Care3 Plus Complete Pack Single Rotation Port + Dual Standard Ports
Rotational maintenance system guarantees thorough cleaning and lubrication of each handpiece.
MODEL
ORDER CODE
Care3 Plus C1 Type (120V) Care3 Plus C1 Type (230V)
Y141-202 Y141-204
Dual Rotation Ports + Single Standard Port Care3 Plus C2 Type (120V) Care3 Plus C2 Type (230V)
CARE 3 PLUS FROM NSK
Specifications
Y141-203 Y141-205
• Power Supply : AC 120V or 230V 50/60Hz • Air Pressure : 0.35-0.6 MPa (3.5-6 kgf/cm2) • Weight : 7.1 kg (C1 type), 7.2 kg (C2 type) • Dimension : W280 x D275 x H360 mm • Solution Tank Capacity : 350 mL
* *
In full tank about 3,500 handpieces (S mode) are cleaned and lubricated. Connects only to Midwest 4-hole type Air piping is necessary (3.5-6 kgf/cm2)
AUTOMATIC HANDPIECE CLEANING & LUBRICATION SYSTEM
correct handpiece maintenance - everytime
Contents • Care3 Plus unit • Power cord with L-shaped plug • Maintenance oil (1 litter) • Oil replenish funnel with filter • Mist filter set • Air tube • Air filter
Low Speed Handpieces
Care3 Plus Adaptors
Low speed handpieces incorporate gearing systems which require extra solution penetration. The NSK rotation system guarantees optimum oil delivery to the internal components of all low speed handpieces, while particles in the coolant water and air channels are removed by the cleaning solution.
MODEL
Care3 Plus ADAPTORS
ORDER CODE
MODEL
Care3 Plus ADAPTORS
ORDER CODE
E-Type Adaptor *
For all brands Low Speed Handpieces
Z280-035
SR Adaptor
For Sirona® High Speed Handpieces for Quick Coupling
Z257-023
PTL Adaptor
For High Speed Handpieces for PTL-CL-4HV-T Coupling
Z257-010
WH Adaptor
For W&H® High Speed Handpieces for Roto Quick® Coupling
Z257-021
QD Adaptor
For MACH-QD & CH-QD High Speed Handpieces
Z257-011
BA Adaptor*
For Bien-Air® High Speed Handpieces for Unifix® Coupling
Z280-022
B2/M4 Adaptor
For Borden 2-hole High Speed Handpieces
T904
F-Type Adaptor*
For ENDO-MATE TC, DT/ TASKAL Wizard Heads
Z280-042
KV Adaptor
For KaVo® High Speed Handpieces for MULTIflex LUX® Coupling
Z257-020
PRODUCTS
ORDER CODE
MODEL
Z016-117
Air Filter
U508-352
Y900-138
Air Filter Element
U508-353
Y900-159
Fuse (120V) Fuse (230V)
U433-222 U433-223
Oil & Air
High Speed Handpieces The critical turbine component, plus all air and water channels of high speed handpieces are thoroughly cleaned and lubricated.
For Care3 Plus only. Not applicable with Care3. * Check with the dealer for the adaptors to mount other manufactures’ handpieces.
KaVo® and MULTIflex LUX® are registered trademarks of Kaltenbach & Voigt GmbH & Co., Germany. Sirona® is a registered trademark of Sirona Dental Systems GmbH, Germany. W&H® and Roto Quick® are registered trademarks of W&H Dentalwerk Bürmoos GmbH, Austria. Bien-Air ® and Unifix® are registered trademarks of Bien-Air Dental S.A., Switzerland.
Spare Parts MODEL
Oil & Air
Maintenance Oil (1 Bottle)
(Pack of 6 Bottles)
Mist Filter Set (pack of 12 piecese)
C1 Type
Two types of units are available.
Single Rotation Port + Dual Standard Ports
Rotation Port
Standard Port
Oil Replenish Funnel with Filter
C2 Type
Standard Port
Air Tube
Dual Rotation Ports + Single Standard Port
Rotation Port
Rotation Port
ORDER CODE
(1 litter)
Maintenance Oil Set
SELECT
PRODUCTS
(3m)
U433-090
Oil Absorber Sheet (Pack of 20)
Y900-186
U508-038
Standard Port
Powerful Partners®
Specifications are subject to change without notice.
PR-D293E Ver.5 09.02.05.HG
Simple to Operate
Automatic Care3 Plus Is the Key to Handpiece Durability Fast, user friendly, fully automatic, and economical.
1
Correct maintenance performed at regular intervals is a key to high performance and longer Open the door and attach up to 3 handpieces to the Care3 Plus couplings.
life of your handpieces. NSK designed easy-to-use Care3 Plus to facilitate handpiece maintenance at your office. Care3 Plus automatically cleans and lubricates up to 3
Care3 Plus control panel is easy to understand and simple to operate.
handpieces at one time with a touch of button. Both high speed and low speed handpieces
Cycle Selection
are processed thoroughly in a single 2-minute operation cycle.
S : Short Cycle for High Speed Handpieces L : Long Cycle for Low Speed Handpieces E : Extra Long Cycle for Speed Reduction Handpieces, etc.
Power Indicator
2
After connecting the handpieces, close the door. Care3 Plus will not operate if the door is not properly closed.
Error Indicator
Air Key Start Key
Air Activation
Easy to Clean
Solution Tank
Air supply is activated by the “Air” key. This enables the operator to flush out all residual solution.
With pulling the detachment pin, the front cover can be completely removed for easy cleaning.
The solution tank has capacity for maintaining 3,500 handpieces (S Mode) before a refill is required. To refill the tank, simply unscrew the cap on top of the unit and pour in new Care3 Plus solution.
3
Select the S, L, or E mode relevant to each handpiece connection location.
S : S mode (Approx. 35 seconds) For high speed handpieces
L : L mode (Approx. 45 seconds) For low speed handpieces
Original Air Filter
Virtually No Mist
Clean air supply is a must for effective handpiece maintenance. NSK Care3 Plus comes with a highly efficient air filter that can be exchanged and installed easily wherever you desire.
Spray mist is generally absorbed within the Care3 Plus unit by disposable mist filtration system. Filter sponges are easily exchanged. (Comes in a pack of 12)
The Oil Level Indicator Oil level indicator is ideally located at the front panel of Care3 Plus unit to clearly show amount of oil in the tank.
Power Cord with L-Shaped Plug The power cord with L-shaped plug allows the Care3 Plus to be installed in virtually any surgery location.
Accommodates NSK and Other Brands’ Handpieces NSK and all other brands of low speed handpieces connect directly to the coupling supplied. NSK high speed handpieces require the PTL adaptor. Adaptors are available for direct connection of most other brands of high speed handpieces.
E : E mode (Approx. 50 seconds) For speed reduction and speed increasing handpieces, etc.
*The figures in brackets indicate the clean-lubricate-flush time for a handpiece.
4
Convenient Memory Function Care3 Plus memory system stores and instantly recalls the last operational setting when the power switch is turned on. This memory function eliminates the need to repeatedly preset handpiece maintenance.
End-of-Cycle Indicator An audible indicator alerts the operator when the cycle is completed.
Press the start key. In less than two minutes, all handpieces are correctly cleaned and lubricated. (When one long mode and two short modes are selected.)