NSK
Air Scaler Reprocessing Instruction
2 Pages
Preview
Page 1
Reprocessing Instruction in accordance with ISO17664
Air Scaler 1 Preparation
Cleaning wipes
2 Cleaning, Disinfection and Drying <For S970 Series> Manual 2sec.
15sec.
38°C
3time
3.5L/min 500lx WL-Adapter (ALPRO)
WL-clean (ALPRO)
3sec. 1time
Minuten Wipes (ALPRO)
1min
WL-Adapter (ALPRO)
2min
3sec. 1time
WL-dry (ALPRO)
WL-Adapter (ALPRO)
WL-Adapter (ALPRO)
WL-cid (ALPRO)
3sec. 1time
WL-Blow (ALPRO)
Automated ISO 15883-1 500lx Minuten Wipes (ALPRO)
・After cleaning remove any remaining moisture using a dry cloth or compressed air ensuring it is dry internally and externally. ・Cover the product with a cloth when drying with compressed air to prevent water aerosol from being produced. ・Use a nationally approved disinfectant with proven bactericidal, fungicidal, and virucidal properties.
<For AS2000 / S950 / S900 Series> 15sec.
38°C
3.5L/min 500lx Minuten Wipes (ALPRO)
3 Lubrication <For S970 Series> Manual 2sec.
REF
Y900084
NSKPANASPRAYPlus
REF
Z182100
Automated Until oil no longer flows from the rear of the handpiece
NSK iCare
S970 Series only (Use L mode)
<For AS2000 / S950 / S900 Series> AS2000 Series
S950 / S900 Series
NSK Turbine Oil
REF
2-3 drops (every 3 days)
Z016112
M4
B2
B3
NSK Turbine Oil
REF
Z016112
NSK Phatelus
2-3 drops to the Drive Air Port (every 3 days)
W&H® Roto Quick®
Sirona® Quick Coupling
Bien-Air® Unifix® L
KaVo® MULTIflex® LUX
5sec.
・Do not use spray lubricant for AS2000/S900/S950 Series. The air scaler could come off under the pressure of the spray.
4 Packaging, Sterilizing and Drying
ISO 11607-1 Use a sterilization pouch that conforms to ISO 11607-1. Seal the pouch. Maximum temperature for NSK instruments is 135°C.
Type
Class N
Class B
Temperature
132°C
134°C
FullCycleTime
≥15min
3-18min
DryingTime
≥30min
≥30min
Perform steam sterilization using the conditions above. Use a steam sterilizer to perform sterilization.
Steam sterilization
CAUTION Plasma
EO
5 Storage
OM-DT0918EN 000
2020.07.03 00001 N