Air Scalers Maintenance Guide

ngle & Straight Handpieces

ING

IZATION

3 DISINFECTION

Maintenance Air Scalers 1 PREPARATION

2 CLEANING

3 DISINFECTION

45 STERILIZATION STERILIZATION

56 STORAGE STORAGE

Air Scalers Air Scalers 11 PREPARATION 6 STORAGE PREPARATION

22 CLEANING CLEANING

33 4 LUBRICATION DISINFECTION LUBRICATION

4 LUBRICATION

5 STERILIZATION

6 STORAGE

1. PREPARATION

1. PREPARATION

Remove the air scaler from the coupling and detach the tip. rom the motor and detach the bur from the chuck. Remove theairtip. scalers to a dedicated decontamination area. Remove organic contaminants with a he coupling and detach the bur the from air the scaler chuck. from the coupling and detachBring paperRemove wipe. ination area. Remove organic a Bring aircontaminants scalers towith a dedicated decontamination area. organic contaminants with a paper wipe.

2. CLEANING

Manual : Clean the external surface of air scaler with running water (<38°C, demineralised water recommended). Automated NSK(<38°C, air scalers demineralised with this symbol arewater thermo-disinfector-ready and therefore Manual: Clean the external surface of air scaler with running water recommended). s symbol are thermo-disinfector-ready and therefore may be washed and disinfected using a thermo-disinfector. When using a nfected using a thermo-disinfector. thermo-disinfector,and be sure to follow its manufacturer's instructions. AutomatedWhen using NSKa air scalers with this symbol are thermo-disinfector-ready therefore may be washed and ure to follow its manufacturer's instructions.

2. water CLEANING dpiece with running (<38 C, demineralised water 1. PREPARATION

disinfected using a thermo-disinfector. When using a thermo-disinfector, be sure to follow its 3. DISINFECTION

3. LUBRICATION 2. CLEANING

Maintenance

Remove the air scaler from the coupling and instructions. detach the tip. manufacturer’s Manual : Wipe the external surface of air scaler with cleaning or alcohol for disinfection. air scalers to a dedicated piece carefully withBring cleaning or disinfectant solution.decontamination area. Remove organic contaminants with a Automated paper wipe.

4. LUBRICATION

Manual : Clean the external surface of air scaler with running water (<38°C, demineralised water • Essential after thermo-disinfection • Essential prior to each sterilization process • Essential after thermo-disinfection ntial prior to sterilization process recommended). Manual : Supply 1-2 drops of NSK Turbine Oil to the drive air port of the air scalers. Connect to ana Spray Plus / Pana Spray. To prevent mist spray from • Essential prior to each sterilization process the coupling and operate for 5 seconds. Automated NSK air scalers with this symbol are thermo-disinfector-ready and therefore nt cloth. Expel excess lubrication. may be washed and disinfected using a thermo-disinfector. When using a cause instability in instrument rotation. Please consult the operation Note : Excessive oil may Manual:  Supply ofsure NSK Turbine Oil to the drive air port of the air scalers. es with NSK Care3 Plus. Be sure to use the 1-2 right drops be thermo-disinfector, to follow its manufacturer's instructions. manual before use.

Connect to the coupling and operate for 5 seconds.

3. DISINFECTION

5. STERILIZATION

Maintenance

Note:: Excessive oil surface may cause instability in instrument rotation. Please consult the operation manual before use. Manual Wipe the external of air scaler with cleaning or alcoholPlace for disinfection. air scalers in a sterilization pouch and seal them. EN13060 4.6.3 recommends autoclaving nd seal them. EN13060 4.6.3 recommends autoclaving Automated for 20 minutes (minimum holding time) at 121°C or 15 minutes (minimum holding time) at 132°C. 21 C or 15 minutes (minimum holding time) at 132 C. NSK recommends Class B or S sterilization. (All NSK air scalers are autoclavable up to 135°C) . (All NSK handpieces are autoclavable up to 135 C)

4. STERILIZATION 4. LUBRICATION

6. STORAGE

scalers in a sterilization and sterilization seal them. EN13060 4.6.3 recommends autoclaving for 20 minutes •Place Essentialair after thermo-disinfection • Essentialpouch prior to each process After the sterilization remove air scalers from the autoclave. Keep them in move handpieces from the autoclave. Keep them in Turbine Oil to the drive air port of the Manual : Supply 1-2 drops of NSK air scalers. Connectcycle, to immediately (minimum holding time) at 121°C or 15 minutes (minimum holding NSK recommends B or dust-free, sterilized time) storageat or 132°C. bring them to a treatment room for Class use. o a treatment roomthe forcoupling use. and operate for 5 seconds. S sterilization. (All cause NSK instability air scalers are autoclavable to 135°C) rotation. Please up consult the operation Note : Excessive oil may in instrument manual before use.

177

5. STERILIZATION 5. STORAGE

Place air scalers in a sterilization pouch and seal them. EN13060 4.6.3 recommends autoclaving After the sterilization cycle, remove air scalers autoclave. Keep them in dust-free, sterilized storage for 20 minutes (minimum holding time)immediately at 121°C or 15 minutes (minimum holdingfrom time) atthe 132°C. NSK recommends or S sterilization. (All NSK air scalers are autoclavable up to 135°C) or bring themClass to aBtreatment room for use.

6. STORAGE

After the sterilization cycle, immediately remove air scalers from the autoclave. Keep them in dust-free, sterilized storage or bring them to a treatment room for use.

177

Product Information | Technical Support Call: 1300 44 33 21 or Email: [email protected] www.nskoceania.com.au