Nutricia
Flocare Infinity Quick Guide
Quick Guide
8 Pages
Preview
Page 1
WELCOME To your new Flocare Infinity feeding pump
Your new pump is there to make things a bit easier for you. Remember, using your pump shouldn't mean you have to miss out on anything you like to do. Even if you are not allowed to eat normal food, you can still have LOTS of fun!
Your pump is small and funky and you can take it with you wherever you go.
What words mean
Before you start using your pump, learn about some strange words
Volume Flow Rate Speed
Tells you how FAST your pump is running
Volume Dose Millilitres
Tells you how MUCH feed is given
Giving Set
This is the tubing that you connect to your pump & feed. It goes through the pump and connects to your feeding tube
Reservoir
The container that you may need to pour your feed into. This is used if your feed isn't already in a Pack to hang up
Continuous Feeding
A feed given over a long time, like lots of meals joined into one
Bolus Feeding
A feed given over a short time, like one meal
How to use your pump
STEP 1
Your new pump is quite easy to use. These steps will teach you how to use your pump. Please ask an adult if you need help at any time.
Hang the feed up and then take the cap off • REMEMBER, do not touch the silver foil part •
Take the giving set & screw it onto the feed Pack (onto the silver foil part) • Push the spike into the feed Pack. You will see that some of the feed will come down into part of the tube
STEP 2
•
STEP 3
1.Open the pump door, press on door clip (A), and lift the door (B) open at the same time 2.Put the loop part of the tube around the big wheel 3.Pull slightly on the giving set to clip plastic part into place 4.Close the pump door
Push the ON/OFF button & hold it down, count slowly to 3. The pump is on when you hear a beep • Push the CLR button to clear the volume memory after your last feed • Push the FILL SET button & hold it down, count slowly to 3. The pump will start & the whole tube will fill up with the feed • You can stop the tube filling up with feed by pushing the FILL SET
STEP 4
•
You are now ready to set up your personal feed programme
STEP 5
HOW TO SET UP A CONTINUOUS FEED • Check that your pump is switched ON • Now push the ml/h button • Use the +/- buttons to set the rate (or speed) your pump will run at. This is the rate your dietitian or nurse has asked you to use • Push the START/STOP button to start feeding
+
STOPPING YOUR PUMP • If you need to stop the pump • Push the START/STOP button once. • The pump will stop when you hear 3 beeps
START /STOP
SWITCHING YOUR PUMP OFF • When the feed has finished • Push the ON/OFF button & hold it down, count slowly to 3 until you hear a beep. • The pump is now off
ON/OFF
ml/h
-
START /STOP
How to set up a dose
If you need to set a dose after setting the rate: DOSE =VOL
1. Push the DOSE=VOL button 2. Use the +/- buttons to set the dose (or total volume to be delivered) 3. Push the START/STOP button to start feeding
+
-
START /STOP
Read through the steps again when you need to and don't forget that your dietitian or nurse will be happy to answer any questions you might have. Happy feeding, and don't let your pump stop you from having FUN!
Nutricia Clinical Care, Nutricia Ltd, White Horse Business Park, Trowbridge, Wilts BA14 0XQ Tel: 01225 711507 www.nutricia-clinical-care.co.uk