Prius Healthcare
ELITE BED Troubleshooting Guide
Troubleshooting Guide
2 Pages
Preview
Page 1
ELITE BED
Troubleshooting Guide
Important Note Ensure the bed is plugged in to mains power at all times. This is to ensure the battery is fully charged.
Bed not working? Here’s a quick tip - check to see that the functions have not been locked out on the Attendant Control Panel.
Attendant Control Panel UP DOWN
Function lock
‘Locked’ lights
To ‘Lock’ Buttons The functions shown on the bottom row of buttons may be ‘locked’ on both the handset and the foot panel. To lock (or unlock) the functions, press the relevant button at the same time as the FUNCTION LOCK button. The ‘locked’ light will indicate which functions are locked.
24 Hour Helpline:
Australia: 1300 283 122 New Zealand: 0800 177 487
ELITE BED
Troubleshooting Guide
Handset Controls
Back rest UP
Back rest DOWN
Bed UP
Bed DOWN
Knee UP
Knee DOWN
Chair UP
Chair DOWN
Tilt head UP
Tilt head DOWN
Under bed lights
Resetting the Bed with the Handset 1. Ensure bed is plugged in to mains power 2. Using the handset, hold the Bed DOWN button until the bed reaches the lowest position. Continue to hold for another 3-4 seconds then release. 3. The bed has now been reset. To test, press the Chair UP button – the bed should lift up for 10 seconds and then adopt the chair position.
24 Hour Helpline:
Australia: 1300 283 122 New Zealand: 0800 177 487