ResMed
Power Station User Guide External battery pack for VPAP™ III ST-A with QuickNav
User Guide
2 Pages
Preview
Page 1
ResMed Power Station External battery pack for VPAP™ III ST-A with QuickNav
Long-lasting backup power • Long-lasting power: ResMed Power Station enables VPAP III ST-A to operate for up to 12 hours on battery power (tested with IPAP 15 cm H2O and 20 bpm). • Back-up power: ResMed Power Station provides battery power for the device in case of power outages or where mains power is not available. Safety alerts and indicators • An audible beep indicates that the battery needs to be recharged. The battery-charge display helps monitor the charge left in the battery. • An alerting beep and red light (LED) indicate when AC mains power is lost. (The battery then automatically begins to supply power to the device, if the ResMed Power Station is switched on.) All-in-one pack • ResMed Power Station offers dual functionality- uninterruptible power supply (UPS) and battery charger. • It eliminates the need for a separate converter.
.
1012612r1 ResMed Power Station V1 1
27/03/2008 2:04:17 PM
Power Station LED display
AC charger LED
What it indicates
What it indicates Battery is being charged to 80% capacity (approximately 3 hours charge time)
No power from AC charger Battery charge is extremely low or empty
Battery has reached 80% capacity and is being charged to 100% capacity (approximately 4 hours charge time)
Battery charge is 25% or less of total capacity Battery charge is between 25–50% of total capacity
Battery is fully charged
Battery charge is between 50–75% of total capacity Battery charge is between 75–100% of total capacity
1
2
3
4
1 Flow generator 2 AC charger 3 Mains supply 4 ResMed Power Station lithium-ion battery For uninterruptible power supply, connect ResMed Power Station to VPAP III ST-A; then connect both devices to mains power and turn them on.
Figure 1: System components How it works • ResMed Power Station is an external longlife, lithium-ion battery which simply sits next to the VPAP III ST-A-no additional tools required. • When mains power is not available or is suddenly cut off, ResMed Power Station automatically supplies power to the device, if the battery is kept switched on.
1 Flow generator Product codes Technical specifications 2 AC charger ResMed Power Station Battery type: 3 ResMed Power Station lithium ion battery Lithium-ion UK 4 Mains supply Battery recharge time: Other European countries 7 hours from fully empty to fully charged Americas Battery power: Approximately 12 hours at IPAP 15 cm H2O, 20 bpm
• The battery is recharged by connecting ResMed Power Station to mains power via the AC charger. When the battery is fully charged, the AC charger displays a green light.
Power Station dimensions: 250 mm X 150 mm X 34 mm (L X W X H)
• When the test button on the ResMed Power Station is pressed, the LED display indicates the current level of charge in the battery (as shown in the table above).
Power supply: Power Station DC Input 17.2V, 3.5A Max DC Output 24.6V, 3A
24907 24906 24908
ANZ
24910
DC cable for VPAP III ST-A
24911
Power Station weight: 2.0 kg without AC charger and cables
Power supply: Charger AC Input 100–240V, 50–60Hz DC Output 17.2V, 3.5A Max Note: ResMed Power Station does not provide DC power for the humidifier. If the HumidAire 2i™ is connected to the VPAP III ST-A while the device is operating on DC power, the humidifier will only operate in passive (unheated, passover) mode. It will return to active mode if mains power is restored.
Please refer to the ResMed Power Station User Guide for detailed information on product handling and usage. ResMed Corp Poway, CA, USA +1 858 746 2400 or 1 800 424 0737 (toll free), ResMed Ltd Bella Vista, NSW, Australia +61 (2) 8884 1000 or 1 800 658 189 (toll free). Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, United Kingdom (see website for details). VPAP and HumidAire 2i are trademarks of ResMed Ltd. and VPAP is registered in the U.S. Patent and Trademark Office. Specifications may change without notice. © 2008 ResMed Ltd. 1012612/1 08 03
Global leaders in sleep and respiratory medicine
1012612r1 ResMed Power Station V2 2
www.resmed.com
27/03/2008 2:04:18 PM