Samsung
Samsung SyncMaster 740 Series User Manual
User Manual
189 Pages
Preview
Page 1
Notational
Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Prohibited
Important to read and understand at all times
Do not disassemble
Disconnect the plug from the outlet
Do not touch
Grounding to prevent an electric shock
Power
When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries).
Do not use a damaged or loose plug. z
This may cause electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands. z
This may cause electric shock or fire.
Use only a properly grounded plug and receptacle. z
An improper ground may cause electric shock or equipment damage.
Insert the power plug firmly so that it does not come loose. z
A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. z
This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet. z
This may cause fire.
Do not disconnect the power cord while using the monitor. z
A surge may be caused by the separation and may damage the monitor.
Do not use the power cord when the connector or plug is dusty. z
z
If the connector or plug of the power cord is dusty, clean it with a dry cloth. Using the power cord with a dusty plug or connector may cause electric shock or fire.
Installation
Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. z
Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it. z
This may cause damage to the product or the person carrying it.
Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z
Dropping the product may cause damage to the product or the person carrying it.
Do not place the product on an unstable or small surface area. z
Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.
Do not place the product on the floor. z
Take care, as someone, specifically children may trip over it.
Keep any flammable objects such as candles, insecticides or cigarettes away from the product. z
Otherwise, this may cause fire.
Keep any heating devices away from the power cable. z
A melted coating may cause electric shock or fire.
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. z
Any increase in internal temperature may cause fire.
Put down the monitor carefully. z
Failing to do so may damage the monitor.
Do not place the monitor face down. z
This may damage the TFT-LCD surface.
The installation of the bracket must be done by a qualified professional. z z
Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inchs) for ventilation purposes. z
Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
Keep the plastic packaging (bag) out of children's reach. z
The plastic packaging (bag) may cause suffocation if children play with it.
Clean
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.
Do not spray water or detergent directly onto the monitor. z
This may cause damage, electric shock or fire.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. z
A dirty connector may cause electric shock or fire.
Make sure to unplug the power cord before cleaning the product. z
Otherwise, this may cause electric shock or fire.
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. z
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.
Contact a Service Center or Customer Center for interior cleaning once a year. z
Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire.
Other
Do not remove the cover (or back). z z
This may cause electric shock or fire. Refer servicing to a qualified servicing company.
If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - unplug it immediately and contact an authorized dealer or Service Center. z
This may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z z
This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center. z
The monitor may malfunction, causing electric shock or fire.
Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. z
Failure to do so may cause electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable. z
This may cause a breakdown, electric shock or fire due to damage to the cable.
Do not move the monitor right or left by pulling only the wire or the signal cable. z
This may cause a breakdown, electric shock or fire due to damage to the cable.
Do not cover the vents on the monitor cabinet. z
Bad ventilation may cause a breakdown or fire.
Do not place water containers, chemical products or small metal objects on the monitor. z z
This may cause a malfunction, electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact a Service Center.
Keep the product away from combustible chemical sprays or inflammable substances. z
This may cause an explosion or fire.
Never insert anything metallic into the monitor openings. z
This may cause electric shock, fire or injury.
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports. z
This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact a Service Center.
When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. z
Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time.
Adjust the resolution and frequency to the levels appropriate for the model. z
An inappropriate resolution may cause undesirable picture quality. 15 inch (38 cm) - 1024 X 768 17,19 inch (43, 48 cm) - 1280 X 1024
Viewing the monitor continuously at a too close angle may result in damage to your eyesight.
To ease eye strain, take at least a five-minute break after every hour of using the monitor.
Do not install the product on an unstable, uneven surface or a location prone to vibrations. z
Dropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire.
When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. z
Failure to disconnect cables may damage it and cause fire or an electric shock.
Place the product out of children's reach, as they could damage it by hanging onto it. z
A falling product may cause injury to the person or even fatality.
When not using the product for an extended period of time, keep the product unplugged.
z
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire.
Do not place your children's favorite toys or any other objects of interest on the product. z
Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death.
When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. z
This may cause your monitor to fall, and become damaged or cause personal injury.
Good Postures When Using the Monitor
Try to maintain a good posture when using the monitor. z z
z
z
z z z
Keep your back straight. Keep a distance of about 45 ~ 50 cm between your eyes and the monitor screen. Look at the screen from slightly above it, and have the monitor directly in front of you. Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor height so that the top of the monitor is slightly below eye level. Adjust the monitor angle so that there is no reflected light on the screen.Try to maintain your arms perpendicular to your armpits. Keep your arms level with the back of your hands. Keep the angle of the elbow perpendicular. Keep the angle of the knees at more than 90 degree. Do not let your feet fall up from the floor. Adjust the arm position so that it is below the heart.
SyncMaster 740B / 940B
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Unpacking Type 1
Monitor & Simple stand
Bottom
MagicRotation program can not be provided as Simple Stand does not support Pivot function. Type 2
Monitor & Pivot stand Type 3
Monitor & Sliding Stand Type 4
Monitor & Lowest HAS Stand
Manual
Quick Setup Guide
Warranty Card (Not available in all locations)
User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software
D-sub Cable
Power Cord
DVI Cable (option)
Cable
Front
MENU button [ ]
Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
MagicBright™™ [ ]
MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button. 1) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip
Brightness button [ ] Adjust buttons [ Enter button [ ] / Source button
When OSD is not on the screen, push the button to adjust brightness. ] Adjust items in the menu. Activates a highlighted menu item. / Push the ' ', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
AUTO button
Use this button for auto adjustment.
Power button [ ]/ Power indicator
Use this button for turn the monitor on and off. / This light glows blue during normal operation, and blinking blue once as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Rear
Simple stand Pivot stand / Sliding Stand (The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. DVI IN port Connect the signal cable to the 15-pin, D-sub port on the back of your RGB IN port monitor. POWER on/off Switch Use this button for turn the monitor on and off. (option) The Kensington lock is a device used to physically fix the system to Kensington Lock something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase. POWER port
See Connecting the Monitor for further information regarding cable connections.
SyncMaster 540B
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Unpacking Type 1
Monitor & Simple stand
Bottom
MagicRotation program can not be provided as Simple Stand does not support Pivot function. Type 2
Monitor & Pivot stand
Manual
Quick Setup Guide
Warranty Card (Not available in all locations)
User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software
D-sub Cable
Power Cord
DVI Cable (option)
Cable
Front
MENU button [ ]
Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
MagicBright™™ [ ]
MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button. 1) Custom Although the values are carefully chosen by our engineers,
the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip Brightness button [ ] Adjust buttons [
When OSD is not on the screen, push the button to adjust brightness. ] Adjust items in the menu.
Enter button [ ] / Source button
Activates a highlighted menu item. / Push the ' ', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
AUTO button
Use this button for auto adjustment.
Power button [ ]/ Power indicator
Use this button for turn the monitor on and off. / This light glows blue during normal operation, and blinking blue once as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Rear
Simple stand Pivot stand (The configuration at the back of the monitor may vary from product to product.)
POWER port DVI IN port RGB IN port Kensington Lock
Connect the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. The Kensington lock is a device used to physically fix the system to something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase.
See Connecting the Monitor for further information regarding cable connections.
SyncMaster 740N / 940N
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Unpacking Type 1
Monitor & Simple stand
Bottom
MagicRotation program can not be provided as Simple Stand does not support Pivot function. Type 2
Monitor & Pivot stand Type 3
Monitor & Sliding Stand Type 4
Monitor & Lowest HAS Stand
Manual
Quick Setup Guide
Warranty Card (Not available in all locations)
D-sub Cable
Power Cord
Cable
Front
User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software
MENU button [ ]
Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
MagicBright™™ [ ]
MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button. 1) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip When OSD is not on the screen, push the button to adjust brightness.
Brightness button [ ] Adjust buttons [
]
Adjust items in the menu.
Enter button [ ]
Activates a highlighted menu item.
AUTO button
Use this button for auto adjustment.
Power button [ ]/ Power indicator
Use this button for turn the monitor on and off. / This light glows blue during normal operation, and blinking blue once as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Rear
Simple stand Pivot stand / Sliding Stand (The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of the monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your RGB IN port monitor. POWER on/off Switch Use this button for turn the monitor on and off. (option) The Kensington lock is a device used to physically fix the system to Kensington Lock something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase. POWER port
See Connecting the Monitor for further information regarding cable connections.