Quick Guide Manual
2 Pages
![S8Exp 1. Getting Start General Introduction Create new patient and get into Scanning Mode 1. Press [Patient], fill in basic patient information; S8 Exp is borne from our relentless efforts to be the most 2. Press OK on the patient interface to create a new patient file; innovative ultrasound manufacturer in the word. The S8 Exp 3. Move the [Trackball] to choose the probe and exam. provides a premium, efficient portable ultrasound solution with 2. Scanning performance and style. B Mode Preparation before Scanning 1. The default scanning mode is B mode, if you want to return to B mode, please press the [B] in keyboard; Lock Parameter 2. Rotate [B] in keyboard to adjust gain, or Press [M-tuning] for image one key Adjustment optimization. Image Adjustment in B mode: M-Tuning Unlock Easily adjust parameters by five knobs just under the monitor, or press the [Menu], File mostly include: [Gain] : ↓↑ brightness; Report Patient Focus Depth PRF Baseline Steer [GSC]: 7 selectable grayscale curve; [Frequency]: high frequency for resolution, while low frequency for penetration; Quad [Chroma]: colorize the image for high resolution. Menu 2B/4B Imaging 1. Press [Dual] or [Quad] to get into 2B/4B imaging; Color Mode Power ON/Off [μ-Scan] : 5- level speckle reduction； [DYN] : ↓more contrast, ↑more information and details; Dual Probe Direction [Compound]: edge enhancement; 2. Press [Dual] or [Quad] to change the activated image. Color/DPI Mode Print 1. Press [C] in the keyboard to enter Color mode; Annot Update Set B Mode Save Freeze 2. Move [Trackball] to change the position of ROI; 3. Press [Set] and then move [Trackball] to change the size of ROI; 4. Press [Set] again to change the position of ROI. The Parameters in Color Mode: Easily adjust parameters by keys in the keyboard, include: [D Gain] : ↓↑ color brightness ; [PRF] : ↓↑ Scale;](https://images.bioclinicalservices.com.au/rgo23310z5tt5sy3e0qqxr8uzv32/320w/SonoScape%20-%2020140731%20-%20S8Exp%20Series%20Quick%20Guide%20Manual.png)
Preview
Page 1
S8Exp 1. Getting Start General Introduction
Create new patient and get into Scanning Mode 1. Press [Patient], fill in basic patient information;
S8 Exp is borne from our relentless efforts to be the most
2. Press OK on the patient interface to create a new patient file;
innovative ultrasound manufacturer in the word. The S8 Exp
3. Move the [Trackball] to choose the probe and exam.
provides a premium, efficient portable ultrasound solution with
2. Scanning
performance and style.
B Mode
Preparation before Scanning
1. The default scanning mode is B mode, if you want to return to B mode, please press the [B] in keyboard;
Lock
Parameter
2. Rotate [B] in keyboard to adjust gain, or Press [M-tuning] for image one key
Adjustment
optimization. Image Adjustment in B mode:
M-Tuning Unlock
Easily adjust parameters by five knobs just under the monitor, or press the [Menu],
File
mostly include: [Gain] : ↓↑ brightness;
Report Patient
Focus Depth PRF Baseline Steer
[GSC]: 7 selectable grayscale curve;
[Frequency]: high frequency for resolution, while low frequency for penetration;
Quad
[Chroma]: colorize the image for high resolution.
Menu
2B/4B Imaging 1. Press [Dual] or [Quad] to get into 2B/4B imaging;
Color Mode
Power ON/Off
[μ-Scan] : 5- level speckle reduction；
[DYN] : ↓more contrast, ↑more information and details;
Dual
Probe Direction
[Compound]: edge enhancement;
2. Press [Dual] or [Quad] to change the activated image. Color/DPI Mode
1. Press [C] in the keyboard to enter Color mode; Annot Update
Set B Mode Save Freeze
2. Move [Trackball] to change the position of ROI; 3. Press [Set] and then move [Trackball] to change the size of ROI; 4. Press [Set] again to change the position of ROI. The Parameters in Color Mode: Easily adjust parameters by keys in the keyboard, include: [D Gain] : ↓↑ color brightness ; [PRF] : ↓↑ Scale;
PW/CW Mode 1. Press [PW] to enter PW mode; 2. Move [Trackball] to change the position of sample volume; 3. Use [Set] to change the size of sample volume, and use [Angle] to change the angle of sample volume line; 4. Press [Update] to activate the Pulse Wave Doppler image;
Elastography Available in the breast and thyroid exam mode for all linear probes; Contrast Imaging Available for C353
3. Measurement
5. Press [M-tuning] to optimize the spectral Doppler; 6. CW is only available for phased array, and press CW in the keyboard to enter CW mode. 3D/ 4D 1. Select the volume probe and choose the exam mode. Press [3D/4D] in the keyboard under B mode; 2. Adjust the ROI and curve line by [Set] and [Update]; 3. Press [1], [2] and [4] in the alphabet keyboard to start the
1. Calculation is active both in scanning mode and frozen mode; 2. Press [Distance] to calculate the distance;
1. Under M mode, press [Menu] and choose [Steer M]; 2. Press left or right of [Steer M] to set the number of the sample line, and rotate [Angle] to change the angle of the sample line. Tissue Doppler Imaging (only available for Phased Array) 1. Under B mode, click [TDI] in the keyboard to enter TDI mode; 2. Use [Trackball] and [Set] to change the position and size of the ROI; 3. Press [PW] button to enter TVD mode; 4. Press [Update] to activate the Pulse Wave Doppler image.
1. Press [Insert Image] to add images, and then Press [Report], input the comment in the text box; 2. Click [Print] on the report interface to preview the PDF report, then press [Print] in the keyboard to print the report out. End Exam Press [End Exam] to end one examination. Start a New Patient You may start a new exam by repeating the instructions above.
3. Press [Area] to calculate the area and circumference;
5. Image Management
4. Press [Calc] to enter the application measurement status;
Image Transfer (only after you END the examination)
5. Choose the desired measurement item by moving [trackball],
1. Press [Patient] in the keyboard, then enter the [Patient List] to
use [Set] to choose and mark on the right position.
choose the images of a certain patient;
4. Post Scanning
2. Choose the type of medium to USB. Then choose the type of file you want to export, like JPG/BMP/AVI/MP4, etc;
4D image real-time status. Steer M mode (Anatomical M mode)
Report and Print
Annotation
3. Click [Export] to send the images to USB.
1. Press [Annot] to activate the annotation dictionary, and input annotation through keyboard.
Note: For detailed information, please refer to the Operation
2. Press [Set] to locate the annotation position.
Manual.
Body Mark
6. User-defined Preset
1. Press [Body Mark] and choose the desired one. 2. Move [Trackball] to place the probe marker, and rotate the [Angle] to adjust the orientation of the probe. Save Images or Cine Press the [Save] to save a single frame image, while press and hold [Save] to save cine into the system. Review Patient File Press [File] to the patient file which you are scanning, then select a certain exam to review images and cines.
How to create your own exam mode? 1. After you change some parameters to optimize the 2D image, press “S” in the alphabet keyboard to enter into the User Preset Menu; 2. Rename the new exam, and choose the Exam Type and Exam Icon though [Set] key; then choose [Create Exam]; 3. You also can choose [Arrange Preset Display] to change the order of all exam modes. Based on Software Version: 3.0.5.1 SonoScape International Marketing Dept.