Sports Art Model T656 Owners Manual

8. MAINTENANCE ... 44 MAINTENANCE Safety Precautions ... 44 MAINTENANCE Circuit Braker ... 45 MAINTENANCE Lubrication System ... 46 MAINTENANCE Schedule ... 50 MAINTENANCE Task List ... 51 MAINTENANCE Maintenance Log ... 52 9. ACCESSORIES ... 53 ACCESSORIES Standard ... 53 ACCESSORIES Option (SA WELL+ Member System)... 53 ACCESSORIES MYE Wireless TV Audio_Channel Receivers ... 54 ACCESSORIES Option (Fan Set & TV Rack)...56 10. APPENDIXES ... 57 APPENDIX Technical Specifications ... 57 APPENDIX Wiring Diagram ... 58 APPENDIX Exploded Diagram ...59

1. INTRODUCTION Congratulations on the purchase of a high quality SportsArt product, the T656 LCD treadmill. Constructed of high quality materials and designed for years of reliable performance, this product was made for full commercial use. Before this product is assembled or operated, we recommend that you familiarize yourself with this manual. Understanding the correct assembly and operation of this product will help ensure that exercisers obtain their fitness goals safely and successfully.

1506mm(59.3") 21

56

mm

(84

.8"

)

)

.6"

5m

35 m(

90

2

2. SAFETY PRECAUTIONS This product was designed and built for optimum safety. However certain precautions should be taken during the use of this product. Please note the following safety precautions: ● To reduce the risk of personal injury, read and understand all the instructions before using this product. ● Make sure the product is installed and operated as instructed in this manual. Be careful when mounting and dismounting the unit. The product shall be disconnected from its power source during service and installed and when replacing parts. ● Use this product only for the intended use described in this manual. ● Check the product before every use. Make sure all parts are assembled, and all fasteners are tightened. Do not use the product if it is disassembled in any way. ● Do not leave your device unattended while in use. ● Assemble and operate the product on a solid, level surface. Do not use outdoors or near water (including swimming pools and saunas) and should not be used where aerosol (spray) products or oxygen are used. Do not operate on a blanket or near flammable materials. ● Keep all air ventilation areas free of blockage. Never drop or insert into any opening. ● Wear appropriate workout clothes, don’t wear loose clothing, tie all long hair back, wear shoes with rubber or high traction soles, don’t wear shoes with leather soles/ high heels or barefoot use this product. ● Never place liquids of any type directly on the unit, except in a bottle holder or accessory tray. Lidded containers are recommended. ● Use the handrails whenever additional stability is required. In case of emergency, such as tripping, the user should grab the handrails and place his/her feet on the side platforms. The handrails may be held to enhance stability as needed, but are not for continuous use. ● Keep away from moving parts. Moving parts may or may not stop immediately if an object becomes caught or impedes normal motion. ● Do not attempt to modify the plug provided with this product. Proper power supply must be provided. If the plug does not ft an outlet, contact a qualified electrician to inspect or modify power in the facility. ● This product must be grounded. If it should malfunction or breakdown, Improper grounding can increase the risk of electric shock. The product is equipped with a power cord having an equipment-grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Check with a qualified electrician if you are in doubt as to whether the power outlet is properly grounded. 3

2. SAFETY PRECAUTIONS (CONT.)

● To Avoid Injury, use extreme caution when stepping onto or off of a moving belt. ● Never operate this product if it has been damaged in any way. If it is not working properly, if it has been dropped or damaged, or dropped into water, contact a service technician for repairs. ● Do not use accessories or parts that are not specifically recommended by the manufacturer (SportsArt). Such parts might cause injuries or cause the unit to fail and void the warranty. We will not be responsible for any safety issue that arises due to the misuse of accessories or parts. At the same time, we will terminate the warranty terms of this equipment. ● Unpack and verify contents of boxes according to the list of parts to check if any parts are missing. If the product is damaged or missing, contact your SportsArt representative to find out all the materials that were damaged during shipping. (Note: Transport damage is the responsibility of the carrier.) ● This product is not intended for use by persons (including children 14 or younger) with reduced physical, sensory, or mental capabilities, or by people who are otherwise deficient in product knowledge or experience. If such people use this product, they should be given training and be supervised at all times by someone responsible for their safety. ● CAUTION : The heart rate system is for reference only, if you feel any pain or any abnormal feeling, please stop Exercise and consult your doctor immediately. ● Consult your physician before starting a workout or training program. It is recommended that you undergo a complete physical examination. Have your doctor review your training and diet programs to advise you of a workout routine you should adopt. ● WORK within your recommended exercise level. DO NOT work to exhaustion. ● Before using this equipment to exercise, always do stretching exercises to properly warm up. ● Always unplug this appliance from the electrical outlet immediately after using and before cleaning. ● WARNING! Only qualified technicians should be allowed to contact electrical components such as circuit boards. Some components carry an electrical charge even after use has been discontinued or the product has been unplugged. For products with power cords, turn off unit power, wait 5 minutes, then disconnect the power cord from the power socket. For products without power cords, let the unit sit without use for 5 minutes. Only after taking such precautions should covers be removed and electrical components be accessed.

● Do not attempt to drag or carry this unit by the power cord. Keep the power cord

away from heated surfaces.

4

2. SAFETY PRECAUTIONS (CONT.)

● Noise emission under load is higher than without load.

● This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the user desires to correct the interference, it is at the user’s own expense. ● In conformity with the European Union Machinery directive 2006/42/EC, this equipment runs at sound pressure levels below 70 dB(A) at the average operating speed of 12 km/hr. ● Warning that any of the adjustment devices that could interfere with the user’s movement should not be left projecting. ● The recommended minimum operating temperature is 15 degree celsius. ● Treadmills should be positioned away from walls to avoid injury due to falls. Be sure that the back of the treadmill has at least six to seven feet of clearance from a ledge, wall or window. The power supply and wiring should be located away from walking paths or taped to prevent tripping when stepping on or off of the running belt. ● Do not stand on the walk belt when starting the treadmill. Straddle the belt with your feet on the left and right landing strips. ● Always use the safety key when operating the treadmill. ● The user weight limit for this product is 160 kg (350lb).

Markings CAUTION: ● Read instruction manual before using. ● Do not let children on or near the product. ● To reduce the risk of injury, stand on side rails before starting treadmill. ● To reduce the risk of injury from moving parts or electric shock, unplug before cleaning or servicing. WARRING: ● WHEN NOT IN USE REMOVE SAFETY KEY! STORE SAFETY KEY OUT OF REACH OF CHILDREN. ● DURING USE, CLIP SAFETY KEY ONTO CLOTHES TO PROTECT USER AND MACHINE. ● Heart rate monitoring system may be inaccurate. ● Over exercise may result in serious injury or death. ● If you feel faint, stop exercising immediately. ● Always attach clip to clothing before use.

5

3. LIST OF PARTS

Assembly Parts No.

Name

Qty. No.

Name

Qty.

A1 Display panel

1

A6

Hardware kit

1

A2 Handlebar assembly

1

A7

Owner’s manual

1

A3 Right pedestal

1

A8

Power cord

1

A3a Feeder cord

1

A4 Left pedestal

1

A5 Main frame

1

8

Components on the Product No. 41

42 43

Name

Specification

Flat washer Spring washer Inner hex screw Flat washer Spring washer Inner hex screw Inner hex screw Flat washer

D22*d8.5*t3.0 M8 M8*P1.25*L20 D22*d8.5*t3.0 M8 M8*P1.25*L20 M6*P1.0*L12 D16*d6.3*t2

Notes QTY 6 QTY 6 QTY 6 QTY 6 QTY 6 QTY 6 QTY 4 QTY 4

Components In the Hardware Kit No.

50

Name Double open-ended wrench Screwdriver shank Plastic fastener T-shaped Allen wrench T-shaped Allen wrench

9

Qty.

Specification

1 1 6 1 1

22mm*24mm

M6*L260 M5

Notes

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual the words “left” and “right” are used to refer to the product and its parts. As such, these designations correspond to the “left” and “right” sides of a person in position to exercise on this product. Also, for brevity, the word “screws” or “nuts” is used where washers and other hardware may be involved.

STEP 0 Preparation: Inspect Walk Belt Placement Inspect the position of the walk belt in relation to the guide rollers. The walk belt should be in the groove of the guide rollers (image O). Make sure that the walk belt is not outside of the groove of the guide rollers (image X). If the walk belt is in the wrong position, press the walk belt into the groove of the guide rollers. After making sure the walk belt is in the correct position, adjust walk belt tension as shown in step 7.

10

STEP 1 Data Cable Installation Remove the screws (41) from the left and right sides of the main frame (A5). Note: DO NOT remove the screws in area (a).

41

(a)

A5

41

(a)

A5

11

STEP 1 Data Cable Installation (Cont.) Follow steps (a) through (e) to thread the data cable into right pedestal (A3). (a) Pull out the data cable from the right pedestal base. Cut the zip tie, and uncurl the data cable. (b) Place the right pedestal (A3) on the floor as shown, with the bottom end facing the data cable. Detach the feeder cord (A3a) from the base of the pedestal, and tie the low end of the feeder cord (A3a) onto the top of the data cable. (c) Disconnect the feeder cord at the top of right pedestal (A3). (d) Pull the feeder cord (A3a) from the top of the right pedestal (A3) as shown, thus threading the data cable through the right pedestal (A3). (e) Once the datacable has been threaded through the pedestal, untie the feeder cord (A3a) from the data cable.

a

A3 A3a

a

b

d

A3a

A3

c aA3a (c) 3A

A3a

e

)(e( )

A3 A3a

12

)c(

STEP 2 Left and Right Pedestals Installation Follow steps (a) through (b) to install left and right pedestals (A3)(A4). (a) Attach left and right pedestals (A3)(A4) to the main frame (A5), and use screws (41) to secure the assembly. (Note: Make sure the data cable is not pinched when installing the right pedestal (A3). (b) Remove screws (42) from left and right pedestals (A3)(A4).

42

)b(

42

)b(

A3 A4

)a (

41

)a(

A5

41

13

STEP 3 Display Panel Installation Follow steps (a) through (j) to install the display panel. (a) Remove the left and right covers from the handlebar assembly (A2). (b) Attach the handlebar assembly (A2) to the left and right pedestals (A3) (A4), then mount screws (42) in position. After all screws on the left and right pedestals (A3)(A4) were mounted in position, fully tighten all mounting screws to secure the assembly. (Note: Make sure the data cable is not pinched) (c) Install the connector in the handlebar assembly (A2) on the data cable in the right pedestal (A3) as shown.

(a) A2

(c)

) b(

)c( (b) A2

42

42

A2

A3

14

A4

STEP 3 Display Panel Installation (Cont.) (d) Remove screws (43) from the handlebar assembly (A2). (e) Remove the rear cover of the display panel (A1). (f) Insert the display panel into the 2 mounting brackets on the handlebar assembly (A2). Gently press down on the display during installation to avoid the front edge of display protrudes over the storage tray. (Note: Make sure the data cable is not pinched)

(d)

(e)

(f)

15

STEP 3 Display Panel Installation (Cont.) (g) Hold the display with one hand, gently tilt it forward, then press it downward. Use screws (43) to secure the display panel to the mounting brackets on the assembly. (h) Pull out the data cable from the handlebar assembly (A2), and connect it with the one on the back side of the display panel. (Note: arrange all the cables neatly inside the display panel) (i) Attach the display panel cables to the connector in the handlebar assembly (A2), and to the circuit board as shown. Organize all the cables and stuff them in the display panel. (j) Finally, fully tighten screw (43) to secure the assembly, and put the cover back on.

(g)

)g( (h)

A1

A2

A1

)h(

43

(j)

(i)

A1

A1

a3

16

)i(

STEP 4 Left and Right Side Covers Installation Follow steps (a) through (b) to install left and right side covers. (a) Install the plastic fasteners (50) to the left/right pedestals from top to bottom.(there are a total of two places) (b) Put the left/right side covers of the main frame (A5) and handlebar assembly (A2) in place.

17

STEP 5 Move the Treadmill Into Place For Use Hold the rear of the walking deck in area A, and then lift the treadmill to roll it into desired position. Warning: Do not place the treadmill on thick carpet or rugs as it may interfere with the walking belt. Place a wooden board on the carpet to keep carpet fibers out of the treadmill if unavoidable.

R L

A

18

STEP 6 Level the Treadmill Press downward on the rear part of the treadmill as shown. Inspect whether the treadmill rests flat on the floor. If the treadmill wobbles, adjust treadmill levelers as follows: (a) Loosen the lever nut. (b) Rotate the leveler foot downward until touching the floor. (c) Rotate the leveler nut upward against the frame of the product to secure this position.

a

b

19

c

STEP 7 Align the Walk Belt (a) First, make sure the treadmill is on a level surface and the incline is at 0% . (b) Start the speed at a lower rate of 3kph/2.5mph to check if the walk belt is aligned and if there is an equal amount of space between walk belt and side-rails on both sides. Remove the rear cover and turn the rear roller adjustment screw to adjust the walk belt if there is misalignment. (c) Put the speed up greater than, or equal to 15kph to ensure the belt is aligned. (d) Check if the walk belt fall in the middle of 2 green labels in the front of the deck. Just slightly off center is acceptable. (e) Let the treadmill run for 2 min., and check if the walk belt is shifted offcenter, if so, go back to step (d) for readjustments. (f) Finish adjustment and walk belt is aligned. *Make adjustments as needed, but avoid turning rear roller screws more than one quarter rotation at a time.

20

STEP 8

Adjust the Walk Belt Tension

Walk belt tension is important to treadmill performance. As your foot hits the walk belt, does the walk belt stop sluggishly before regaining traction? Or, if you stomp your feet, bracing against the direction of rotation, does the walk belt not pause whatsoever? When either of these conditions occurs, walk belt tension should be adjusted. To further examine walk belt tension, lift both sides of the walk belt at the center of its length (shown in figure A & B below). The walk belt should rise 30m/m (about 1 1/8”). A hanging gauge, should measure the weight at 3Kg or 6.6lb. Adjust the tension if it differs from this specification. If the walk belt is too loose, use a hex wrench to rotate rear roller screws, clockwise one-quarter turn at a time. If the walk belt is too tight, use a hex wrench to rotate rear roller screws counterclockwise one-half turn at a time. Test walk belt tension after each adjustment and repeat the process until the tension is right. Do not rotate the screw more than 720 degrees.

Ce

21

nte r